Intro to RNA-Seq Data Analysis Course

From wiki
Revision as of 16:11, 11 May 2017 by Rf (talk | contribs)
Jump to: navigation, search

Course schedule

  • This is based on a 2 day Edinburgh Genomics course of the same name, with the following changes:
- "Introduction to Linux" moduel excluded
- "Sequencer technology overview" module excluded.
- No laboratory visit
- 50% of that course was theoretical, this will be reduced to 30%
  • Each section begins with a "Talk", and then a practical runthrough.
  • If necessary, some talk slides may be skipped, as the main idea is getting through the practicals.
  • Having said that if major theoretical points arise during a practical, they will be discussed.
  • Course website: http://stab.st-andrews.ac.uk/i2rda/
- this has all the presentations and practicals

Connecting to a remote Machine

Presenting this before introduction as some people might experience delays logging in.

  • We shall use a remote machine not the machine you are logged into locally
  • The program we shall use is PuTTY.
  • Please try to locate PuTTY in the applications section or on AppsAnywhere

Configuring PuTTY for connection

  • Server: marvin.st-andrews.ac.uk
  • Terminal | keyboard | check VT100+
  • Window | Selection | Control use of Mouse | set xterm
  • Connect | Data | enter username
  • Connection | ssh | X11 Forwarding | Check yes
  • Back to PuTTY main screen | select Default setting |click save

You should now be able to "open" a session

  • Be aware: typing in your password is done blindly. I.e. it does not appear on the screen.

Note: If you don't have your password, please ask to have it reset for you.

Computing resources notes

  • RNA-Seq like other Next Generation Sequencing technologies, is characterised by;
- heavy computational workloads
- many different software programs, sometimes doing the same thing, which can be arranged into a pipeline.
- long-running tasks.

These have three implications:

- The marvin cluster is an 11-machine shared computing resource, not a personal computer ... others are using it.
- We need to load the special software before using it
- We want to be able to have a process run unattended.
  • For these three aspects, we have:
- A queue system to use, we shall request an interactive session (qrsh) from the queue.
- Use the module system to load, list and unload software programs
- We shall use the GNU Screen utility so we can do other things while waiting.

Computing resources diagram

Marv.png

Aspects of using Windows terminals to connect to Linux

  • You can pen the http://st-andrews.ac.uk/i2rda site on the Windows web-browser (Chrome preferred) and copy text selecting and ctrl+c
  • This can then be pasted inside the PuTTY command-line by clicking the middle mouse button.
  • In many ways, copy-pasting is not great for learning.
- although some of the commands are too long to type out, even with history and tab-completion.
- try to also use tab-completion, and the history (up/down arrows and Ctrl+r)

Weakness to watch out for:

  • The marvin cluster (more precisely, the network it's attached to) doesn't carry graphics so well.
  • We shall be using several graphical programs, and they are all likely to run slowly.
- and sometimes even stall
- we'll cross that bridge when we come to it.

GNU Screen 1

A program which allows several command-line sessions open, similar to the idea of open tabs in a web browser. Let's try it out.

  • To enter a new session, type screen
  • This will open with quite a bare screen except with a indicator line at the bottom.
  • screen works on the activator key concept, you need to use Ctrl+l (while Ctrl-key iis held down briefly, l-key is pressed) to activate any of its functions.
  • After pressing Ctrl+l and releasing you then have a series of single key strokes that will do various useful things.
  • There will be one command-line session open when you start it.
- it's numbered 0, and called scr1, we'll mostly deal with it as 0.
  • Let's learn how to get out of it first
- type exit again and you will be told you have exited screen.
- you are now back in the ordinary command-line.

GNU Screen 2

  • Go back into screen, type screen.
  • you open a new session with ctrl+l,c which creates a new session.
- you now have two sessions open
  • type ctrl+l,c again, for three open sessions. You can have more, but we'll stick to three: number 0, 1 and 2.
  • Switch back and forth between the three open sessions: use Ctrl+l,n (n for next) or Ctrl+l,p (p for previous)
  • Don't see anything different when you do this? Look again at the bottom line, the asterisk has changed position.
- the asterisk defines the active session
- you can move to a numbered session directly with ctrl+l,1 or ctrl+0,1,2 for sessions 0, 1 and 2.

Getting a Queue slot

We're going to use one of the screen sessions to get a slot from the queue.

  • Assuming you've launched screen, type ctrl+l,0 to confirm you are in the first screen session.
  • Type qrsh which requests a queue slot ... it will take a little time to give you one.
- we shall not use this slot for the graphical programs, only the processing ones.
  • When you get a slot, notice if you are still on marvin, or one of the nodes (assignment is based on load usually)
- type qstat to see that you have allocated slot working in the queue.
  • let's get something trivial running here: execute the prtgn.sh script by typing prtgn.sh, then RETURN, and let it print out gene names to its heart's content.
- it's not drosophila, so only some of them are funny.

Recovering a session

  • Now detach a session, it will stay running, and then go back to it
- ctrl+l,d to detach
  • Now you're outside screen, you can log out.switch off and go home if you like (don't please)
  • Next type screen -r to reattach.
- did the process stop?
- unfortunately this cannot be done with many graphical programs
- though some have a command-line mode, where it is possible
  • Type ctrl+c, to stop it, demonstration over.