Biolinux Source course
Table of Contents
PART ONE: INTRODUCTION TO THE BIO-LINUX 8 SYSTEM……………………………………..1
Logging in and exploring the Bio-Linux desktop…………………………………………………………………………………………………1
Running applications……………………………………………………………………………………………………………………………………….3
Finding files and drives……………………………………………………………………………………………………………………………………3
Setting things up……………………………………………………………………………………………………………………………………………..4
Finding your way on the system…………………………………………………………………………………………………………………………7
The Root Folder………………………………………………………………………………………………………………………………………………..7
Using the command shell……………………………………………………………………………………………………………………………………8
Anatomy of a Command………………………………………………………………………………………………………………………………….9
Listing files in a directory………………………………………………………………………………………………………………………………10
Learning about Linux commands…………………………………………………………………………………………………………………….11
Basic Linux tips for filenames………………………………………………………………………………………………………………………..12
Getting the prompt back when running graphical applications from the terminal………………………………………………….12
Linux shorthand and shortcuts………………………………………………………………………………………………………………………..13
More Basic Linux Commands………………………………………………………………………………………………………………………….13
Changing directories……………………………………………………………………………………………………………………………………..14
Tab completion……………………………………………………………………………………………………………………………………………..15
Command history…………………………………………………………………………………………………………………………………………….17
Making a directory………………………………………………………………………………………………………………………………………..17
Office software………………………………………………………………………………………………………………………………………………..18
Using text editors……………………………………………………………………………………………………………………………………………..19
Nano……………………………………………………………………………………………………………………………………………………………19
Gedit……………………………………………………………………………………………………………………………………………………………19
Reading text files……………………………………………………………………………………………………………………………………………..20
An important note on line endings – CR and LF……………………………………………………………………………………………….21
Copying files……………………………………………………………………………………………………………………………………………………22
Linking to files…………………………………………………………………………………………………………………………………………………23
Removing files and directories………………………………………………………………………………………………………………………….24
Redirecting output to files………………………………………………………………………………………………………………………………..25
Piping output between applications………………………………………………………………………………………………………………….26
Diff, Grep and Sort………………………………………………………………………………………………………………………………………….27
Diff……………………………………………………………………………………………………………………………………………………………..27
Grep…………………………………………………………………………………………………………………………………………………………….27
Environment Variables…………………………………………………………………………………………………………………………………….29
Changing permissions on files and directories…………………………………………………………………………………………………..30
Some other useful information…………………………………………………………………………………………………………………………31
Copying and pasting text………………………………………………………………………………………………………………………………..31
The simple way to stop a process…………………………………………………………………………………………………………………….31
Putting a command to one side……………………………………………………………………………………………………………………….31
Logging out of a session………………………………………………………………………………………………………………………………..31
Clearing your terminal of text…………………………………………………………………………………………………………………………31
Accessing a running program or working with others interactively……………………………………………………………………..32
Accessing your machine – including a full graphical desktop - remotely……………………………………………………………..32
PART TWO: INTRODUCTION TO BIOINFORMATICS ON BIO-LINUX………………………..33
Documentation and Help for Bioinformatics Software on Bio-Linux…………………………………………………………………33
Bio-Linux Bioinformatics Documentation……………………………………………………………………………………………………….33
Help Functions within the Programs………………………………………………………………………………………………………………..34
Example data for this tutorial…………………………………………………………………………………………………………………………..34
Interface choices………………………………………………………………………………………………………………………………………………35
General points about working with bioinformatics programs……………………………………………………………………………36
Sequence formats………………………………………………………………………………………………………………………………………….36
File naming conventions in bioinformatics……………………………………………………………………………………………………….37
Naming files and the danger of over-writing previous results……………………………………………………………………………..39
A common problem: what is a text file and what is not………………………………………………………………………………………39
GZipped files in bioinformatics………………………………………………………………………………………………………………………40
EXAMPLES OF RUNNING BIOINFORMATICS PROGRAMS ON BIO-LINUX………………41
Analysing sequences with QIIME…………………………………………………………………………………………………………………….41
Preparation…………………………………………………………………………………………………………………………………………………..42
Assign Samples to Multiplex Reads………………………………………………………………………………………………………………..42
Processing sequences into OTUs…………………………………………………………………………………………………………………….43
Data to information……………………………………………………………………………………………………………………………………….44
Heatmap………………………………………………………………………………………………………………………………………………….45
Taxonomy Summary Charts……………………………………………………………………………………………………………………….45
Diversity………………………………………………………………………………………………………………………………………………………45
Alpha………………………………………………………………………………………………………………………………………………………45
Beta…………………………………………………………………………………………………………………………………………………………45
Inter-Sample Distance……………………………………………………………………………………………………………………………….46
Jackknifing & UPGMA……………………………………………………………………………………………………………………………..46
Analysing sequences with MOTHUR………………………………………………………………………………………………………………..47
Preparation…………………………………………………………………………………………………………………………………………………..47
Assign Samples to Multiplex Reads and Quality Filtering………………………………………………………………………………….48
Generating Alignment & Distance Matrix………………………………………………………………………………………………………..48
Classify Sequences………………………………………………………………………………………………………………………………………..49
Renaming Files……………………………………………………………………………………………………………………………………………..49
Clustering Sequences…………………………………………………………………………………………………………………………………….49
Generating OTU Table and Normalisation……………………………………………………………………………………………………….49
Classifying OTU…………………………………………………………………………………………………………………………………………..50
Converting the shared file to BIOM-format………………………………………………………………………………………………………50
Data to information……………………………………………………………………………………………………………………………………….50
Heatmap………………………………………………………………………………………………………………………………………………….50
Venn Diagram…………………………………………………………………………………………………………………………………………..50
Finding and running useful scripts…………………………………………………………………………………………………………………..51
Aligning sequences using MUSCLE………………………………………………………………………………………………………………….51
BLAST……………………………………………………………………………………………………………………………………………………………53
A few examples of ways to run BLAST, on Bio-Linux or otherwise……………………………………………………………….53
What this course covers……………………………………………………………………………………………………………………………..53
Why use BLAST on the command line?………………………………………………………………………………………………………53
General considerations for database searching……………………………………………………………………………………………..54
A very, very brief introduction to BLAST+………………………………………………………………………………………………….54
How a BLAST database looks on the file system………………………………………………………………………………………….55
A simple blastp search……………………………………………………………………………………………………………………………….55
Formatting BLAST output…………………………………………………………………………………………………………………………56
Handling multiple sequences……………………………………………………………………………………………………………………..57
BLAST searching using fasta files containing more than one sequence……………………………………………………….57
Processing multiple files using a foreach loop……………………………………………………………………………………………………57
Working with lots of BLAST results……………………………………………………………………………………………………………61
EMBOSS Programs…………………………………………………………………………………………………………………………………………62
Ways to run EMBOSS programs:……………………………………………………………………………………………………………….62
A comparison of the Jemboss and command line interfaces for EMBOSS programs…………………………………….63
Working with EMBOSS programs………………………………………………………………………………………………………………63
Using the EMBOSS command line……………………………………………………………………………………………………………..65
A very basic sequence assembly………………………………………………………………………………………………………………………..69
Quality Checking………………………………………………………………………………………………………………………………………69
Split Barcodes………………………………………………………………………………………………………………………………………….69
Clean Up………………………………………………………………………………………………………………………………………………….70
Assembly With Velvet……………………………………………………………………………………………………………………………….71
Assembly With Abyss……………………………………………………………………………………………………………………………….71
Assessing The Assemblies………………………………………………………………………………………………………………………….72
Adding Some Annotation…………………………………………………………………………………………………………………………..72
Artemis……………………………………………………………………………………………………………………………………………………………73
Ways to run Artemis:…………………………………………………………………………………………………………………………………73
Appendix A – BLAST references and documentation………………………………………………………………………………………..75
Web pages……………………………………………………………………………………………………………………………………………………75
References……………………………………………………………………………………………………………………………………………………75
Appendix B – Creating local BLAST databases………………………………………………………………………………………………..76
Obtaining local BLAST databases………………………………………………………………………………………………………………76
Building BLAST indices from local sequence files……………………………………………………………………………………….77
Appendix C - Cheat sheet of basic Linux commands…………………………………………………………………………………………79
Copyright and redistribution:
This document is the work of many authors over many years. Unless otherwise stated the material is Copyright NERC.
You may redistribute the complete document and its associated files without restriction in any format.
If you re-use substantial portions of this text in derivative works you must acknowledge the authors (CC-BY). We would
also appreciate you letting us know if you re-use our stuff.
If you use Bio-Linux for your science, please cite us! See the website for further info.
Part One: Introduction to the Bio-Linux 8 System
Logging in and exploring the Bio-Linux desktop
You can log into your Bio-Linux machine locally or over the network, on a fully installed system or a Virtual
Machine or on a system running Live from a USB memory stick or a DVD.
These course notes are written from the perspective of someone running the Live version of the system – that
is, having booted a PC directly from a USB memory stick and selected “Try Bio-Linux”. The main
differences for people working on an installed system will be the name of the account you are logged into
and what privileges that particular user account has. For example, the user of the Live system always has full
administrative privileges. So don’t worry if you find small differences between what is described here and
what you see on your system.
Please refer to our on-line document about various ways you can set up a Bio-Linux system:
http://environmentalomics.org/bio-linux-installation
If you are booting the machine from a DVD or a USB memory stick, when prompted, select
Option 1: Try Bio-Linux
After the system has started up, you will see the Bio-Linux desktop (Figure 1).
1
Figure 1: A view of the Bio-Linux 8 desktop
There are three icons on the desktop
●
Install Bio-Linux 8
On the Live System only – click this icon to start the Bio-Linux installer
●
Bio-Linux Documentation Opens a menu of links as follows:
◦
NEBC Homepage
Opens the NEBC home page in a web browser
◦
User Guide
Opens the Bio-Linux Userguide – a basic introduction to system admin
◦
Introductory Tutorial Opens the folder of Introductory Bio-Linux tutorials and data files
◦
Bioinformatics Docs Shows the NEBC Bio-Linux Bioinformatics Documentation System
●
Sample Data
Provides access to much sample data to help you in trying out new
software
On the left of the screen you will see the Dash, which is used to launch and organize applications. The
dash is populated by a column of large button icons. The Dash Button at the top with the Ubuntu logo
brings up the main Dash panel to find files and applications (see below). The other icons are, by
default, from the top:
1.
Open your home folder
2.
Launch Firefox web browser
3.
Launch Evolution mail reader
4.
LibreOffice Writer word processor
5.
LibreOffice Calc spreadsheet
6.
LibreOffice Impress presentation editor
8. Shell Terminal
9. Ubuntu Software Centre (find and install
apps)
10. System Settings and User Preferences
11. Virtual Desktop Switcher
12. Disks and USB removable media
13. Rubbish Bin (deleted files area)
On the top of the screen you will see the menu and panel bar (Figure 2).
Figure 2: The menu and panel bar, found at the top of the screen.
If you open an application window, the name of the active application will appear in the left portion of this
bar. If you move the mouse over it, a context menu for the active window will appear (like on Apple Mac).
The right portion of the bar has a panel of icons to control some system settings.
From left to right, the things you see in the panel area above are:
1. Network monitor and setup (the icon shown
indicates WiFi is active – you may see others)
2. Keyboard selector (defaults to UK keyboard)
3. Battery monitor (on laptops only)
4. Audio volume control
5. Wall clock (click it for a calendar)
6. System menu (includes access to system
settings and options to lock screen, switch
user, shut down, etc.)
2
Running applications
Clicking the Dash Button at the top left of the screen opens a panel where you can search for applications
and files on the system. This includes bioinformatics tools and any other applications you have installed.
Start typing either the application name or a keyword, or select the DNA icon at the bottom (circled in the
image) to see a list of bioinformatics tools and resources.
Figure 3: Searching for applications in the Dash
The applications found in the menu are by no means all the means all those found on the system. Most
bioinformatics applications need to be run from the terminal as detailed at length in this tutorial.
Finding files and drives
The file cabinet icon near the top of the Dash takes you directly to your Home folder.
Figure 4: Your home folder
3
Your personal Desktop, and folders in your Home area called Documents, Pictures, Videos, etc. are listed.
You can use these or else create your own folders as you wish.
The file browser provides convenient shortcuts to these directories in the left pane, even if you are viewing
another folder in the main panel.
Devices recognized by your system such as the disk drives, CD/DVD devices, USB sticks, etc. are listed at
the bottom of the left pane. Removable media can be ejected by clicking the icon next to the device name.
Networks resources can be accessed through the Browse Network icon. This includes Windows network
shares using the CIFS protocol and files on other Bio-Linux machines if you can access them via the SFTP
protocol. Browsing regular FTP servers is also supported.
Note: The Dash also has a file and media finder, as seen on the previous page, selected by clicking the
Ubuntu button at the top left to bring up the Dash console and then selecting one of the little white icons
from along the bottom of the window.
Setting things up
The System settings icon
allows you to customise
and administer your system (Figure 6) in various ways.
The Personal area is used for customising a variety of
attributes relating to your personal preferences.
The Hardware and System areas allow you to do things such
as configuring hardware drivers, changing firewall settings,
administering users and groups, and managing the packages on
your system.
Other features - Virtual Desktops etc.
The icon that looks like this:
allows you to switch
“virtual desktops”. Unlike Windows, Linux by default gives you access to multiple desktop areas. This
allows you to have windows open for different things in different virtual desktops. For example, if you were
working on writing an article, you could have programs relevant to that work open and visible via one of
these desktops. Meanwhile, you could have programs related to sequence analysis open on another desktop,
and so on. This is a great tool for keeping things organised during your working day. Clicking the icon will
zoom out to show an overview of all desktops. You can also switch quickly by holding down Ctrl+Alt and
tapping the arrow keys on the keyboard.
The Deleted Items Folder icon
(also commonly referred to as a Rubbish Bin or Trashcan) is the
bottom icon the Dash. This is where files deleted in the file browser usually end up. This gives you a chance
to salvage them if you deleted them by mistake. Deleting files on the system is covered in more detail in the
Removing Files and Directories section of this tutorial.
4
Figure 5: The System Settings Window
Exercise 1-1
a) Exploring the desktop
Take some time to explore the desktop. Look at the options under each of the icons covered in the previous
section, and try the various subsections in the Dash console.
Try clicking the icons on the desktop. Also try
using the right and middle mouse buttons when the mouse pointer is over the icons in the Dash and explore
the menus presented to you.
Try going to a different virtual desktop and starting up some windows/applications there. Try moving
windows off one desktop area and onto another.
b) Obtaining the example files for this tutorial
The sample files referred to in this tutorial can be found on the system as a compressed package file. You’ll
need to copy and unpack them before proceeding.
Copying the compressed file from the tutorials folder on the system
●
Double-click the Bio-Linux Documentation icon on the desktop
●
Open the Introductory Tutorial
●
Drag the bioinf_files.tar.gz file to the left and drop it over the word Home to copy it to your home
folder.
Note that a copy of this file can also be found online if you need it for some reason.
http://nebc.nerc.ac.uk/downloads/courses/Bio-Linux/bioinf_files.tar.gz
c) Extracting the files from the compressed tarball
The file you just downloaded is referred to as a tar file or tarball. Tar is a utility similar to Winzip; it
makes package of files. The extra .gz extension shows that the gzip method has been used to compress the
tar file.
Here are two equivalent options for how to unpack these files, one on the command line and one graphical.
Both should produce the same result.
Option 1 – extracting via the command line
●
Open a new terminal by clicking the icon in the dash —>
●
Type the following at the command prompt and press the enter key :
tar -xz -f bioinf_files.tar.gz
This command uncompresses and unpacks the contents of the tar file into your current working directory,
which in this case is your home folder. You should then see a new prompt, just like this:
5
(exercise 1-1 continued)
If you see an error, try typing the command again, making sure it is exactly as shown above including
spaces, hyphens, underscores, etc. If the error says “No such file or directory ” then check you really did
copy the file in step (b) above. You can confirm the extraction worked by looking in the file browser or
using the ls command.
Option 2 – extracting via a graphical interface
But don’t use this version – we’re trying to learn about the command line here!!
●
Open your Home Folder by clicking the file cabinet icon in the Dash.
●
Click the right mouse button over the bioinf_files.tar.gz file and select Extract Here.
d) Re-visiting the command above
Press the up arrow key while in the terminal. The previous command should re-appear for you to edit.
You can move the cursor left and right using the keyboard but don’t try to move it with the mouse – that
won’t work.
Edit the command by adding an extra ’v’ righ after ’-xz’ so that the full command reads:
tar -xzv -f bioinf_files.tar.gz
Hit the enter key to run it. You don’t need to scroll the cursor back the end before you do this. What is
the result this time?
The letters after the hyphens are parameters of the tar command: x means “unpack/extract”, the z means
“the file should be uncompressed with gzip”, the f indicates the file to unpack, and the v you just added
means “be verbose”. Therefore on this occasion you should have seen a list of the files being unpacked.
This is a common behavior for many Linux commands. If the command runs successfully without errors
it says nothing and just goes right back to the prompt. If you want the command to tell you what it is
doing, adding -v makes it verbose, otherwise you may assume that “no news is good news”.
The use of the cursor keys to re-visit commands is a major time-saver in the terminal and you must get in
the habit of doing this. The other major time-saver is Tab completion which we will come to soon.
e) Removing the compressed tarball
The unpacked files that you will be working with in this tutorial are now in a directory called bioinf_files.
You can remove the compressed tar file now if you wish. Again, this can be done via the command line or
using the graphical file browser but we’ll stick with the command line version. More details about how to
remove files from the system are covered in the Removing Files and Directories part of this tutorial.
●
Open a terminal window if you don’t have one already.
●
Type the following into the terminal, then press Enter:
rm bioinf_files.tar.gz
●
Enter “y” to agree when you are asked if you wish to delete the file.
6
Finding your way on the system
In Linux/Unix systems, documents are usually referred to as files, and file folders are referred to as
directories.
Your Bio-Linux file system can be thought of as a huge file folder (directory), inside of which are many
other file folders (directories). Inside these there are more nested file folders (directories), and so on. As in
the real world, where file folders can contain documents and other file folders, in Linux directories can
contain files and other directories. The hierarchy of folders is called the directory tree.
Your personal Home folder is one directory within the tree of directories that make up your Bio-Linux
machine. In your account, you can create other directories, store data, run programs, etc. A graphical view of
your home directory is available by clicking on the file cabinet Files icon in the Dash toolbar (Figure 5). This
opens up a window that shows the files and directories in your Home. The full name of this folder on the
system is /home/live, ie. a directory named after the login account, live, within the top-level directory named
/home, but the graphical file browser just shows it as Home.
Linux enforces file permissions depending on the login account. By default on Bio-Linux, your account has
the right to create, delete and edit files in your own Home folder, but not in other people’s accounts or in
system directories. You can be given permission (or give yourself permission, if it’s your system) to work on
files in such areas, and some information on setting file permissions is given later in this course. Your system
administrator or local IT support should be able to help you with sharing files if they are on a shared server.
You can use the graphical file browser to explore directory areas on the machine, and to move around in your
own files. It allows you to accomplish most typical file operation, including opening files and copying,
moving or deleting files using drag and drop or copy/cut/paste. To view areas of the system outside your
Home directory, click on Computer under Devices in the left hand pane to see the root directory of the
system.
Exercise 1-2
●
If you have not done so already, click on the filing cabinet Files icon near the top of the Dash
●
Double-click on the bioinf_files directory that you unpacked in Exercise 1-1, to view the contents
●
Investigate the options under the file browser menus. These appear on the bar at the very top of the
screen.
●
Click on the Computer icon in the left panel. This allows you to see the root directory – the base of the
whole filesystem hierarchy.
●
Find the folder called home and double click on it.
●
You should see a single folder called live listed. Select this to get back to your Home folder. If you
are not working on a live-booted system you should see a folder with your username, and other user
folders may also listed. A lock symbol on a folder would inform you that you do not have permission to
view the contents of that folder.
The Root Folder
The name of the base directory of the whole system, the one within which every file on the system is
contained, is the root directory. It is referred to by a single forward slash “ / ”.
When you work in the graphical file browser it shows your location relative to your Home folder, unless you
are looking at files outside your Home in which case it shows the location relative to the root. You should
have seen how the location changed as you browsed folders in exercise 1-2.
7
Figure 6: Location path for Templates folder in File Browser view.
Your personal home folder (actually called live but labeled as Home), sits within the directory called home
(with a small h), that contains homes for all users. This directory home is under the root directory,
represented by a tiny picture of a disk in the graphical view or a single forward slash in the terminal.
In other words, this information tells you where you are in system.
The location of a file or directory within the system is its path. If you are asked for the full path or absolute
path to a file, you need to provide a complete listing of all the directories traversed on the system to get to
that file. That is, you need to give the full path from the root directory to that file. The path is written by
starting with a forward''' slash “/” then listing the names of the directories you need to traverse in the system
to find that file, with each directory name separated with another forward slash.
To see the full path in the conventional format most command-line programs would expect you to provide,
press Ctrl-L while viewing a File Browser window. You should see something like this:
To summarize the syntax provided in Figures 9 and 10:
/home
home is a directory located within the root directory
/home/live
live is a directory within the directory home which is within the root
directory. This special directory will sometimes be shown as
Home, with a
capital H, because it is the home folder for the live user.
As another example: the full path to the file capsall.fasta, in the bioinf_files directory within the home
directory of the live user:
/home/live/bioinf_files/capsall.fasta
Often you can provide just the route from where you are on the system to where your file is; this is referred
to as a relative path. For example, if you are working in your home directory, the relative path to the file
mentioned above would be bioinf_files/capsall.fasta.
Keeping things organised
Everyone knows it, but it’s worth restating: if you start by creating a folder structure with meaningfully
named subfolders, name your files so that the names indicate the contents (or follow some defined naming
convention), and store your files in the right place, your life will be much, much easier!
Using the command shell
The real power of Linux/Unix systems is the command line.
A list of common Linux commands is provided in Appendix D of this document for reference.
Many programs and facilities are available through graphical options on Linux, but all programs and
facilities can be accessed by the command line, also known as the shell. Some tasks are easier, or more
appropriately done using graphical interfaces. Equally though, other things are easier or more appropriately
8
Figure 7: Location in graphical file browser given in text; this is the the full
path to the Templates folder in the home directory of the live user account.
done using the command line. Obvious examples include when you need to work with large numbers of files
or want to automate processes. First steps on the command line can be hard but the rewards are worth it (we
promise!)
Access to the command line is done through a terminal window.
You can open a new terminal by:
●
clicking the middle button on the terminal icon on the Dash toolbar
●
or, going into an already open terminal and typing a command to open a second terminal:
gnome-terminal &
Anatomy of a Command
Linux/Unix commands usually take the form shown in Figure 11. You’ve already seen a good example in
Exercise 1-1 part c.
The first word you supply on the command line is interpreted by the system as a command; that is –
something the system should do or a program to be run. Items that appear after that on on the same line are
separated by spaces. The additional input on the command line indicates to the system how the command
should work. For example, what file you want the command to work on, or the format for the information
that should be returned to you.
Most commands have options available that will alter the way the command functions. You make use of
these options by providing the command with parameters, some of which will take arguments. Examples in
the following sections should make it clear how this works. With some commands you don’t need to issue
any parameters or arguments. Occasionally this is because there are none available, but usually this is
because the command will use default settings if nothing is specified.
If a command runs successfully, it will usually not report anything back to you, unless reporting to you was
the purpose of the command (eg. ls). If the command does not execute properly, you will see an error
message returned. Some of these messages are hard to decipher until you have a bit of Linux experience but
ultimately they should tell you what has gone wrong.
Note: Items supplied on the command line separated by spaces are interpreted as individual pieces of
information for the system. For this reason, a filename with a space in it will be interpreted as two filenames
by default. How to get around this is is addressed in more detail later in the course.
Note 2: The use of the ampersand in the previous example, gnome-terminal &, is explained in a few pages
time. You would not put an ampersand on the end of most shell commands.
9
Figure 8: The Linux/Unix command line structure. Each part of a command is separated by
one or more spaces.
command
parameters
arguments
what I want to do
how I want to do it
on what do I want to do it
eg: tar
-xvz -f
bioinf_files.tar.gz
Listing files in a directory
The command ls lists files in a directory.
By default, the command will list the filenames of the files in your current working directory. When you first
open a shell this is your home directory.
If you add a space followed by a –l (that is, a hyphen and a small letter L), after the ls command, it alters the
behavior of the command: it will now list the files in your current directory, but with details about them
including who owns them, what the size is, and what kind of file it is. Information about this is shown in
Figure 11.
Exercise 1-3
a) Try browsing files in both the terminal and the graphical file browser:
●
Open a new terminal by clicking the terminal icon
●
In the terminal, type the command ls. Compare what you see listed with what you see in the graphical
representation of your Home directory.
●
Type the command ls –l and note the kind of information being provided and how it compares to the
graphical representation of your files.
●
In the graphical File Browser, click on the List option under the View menu, and compare this
information to that provided using the ls –l command.
●
In the console, type ls –l bioinf_files and also click on the bioinf_files folder in the graphical file
browser and compare what you are seeing.
You can also use glob patterns to identify file names by pattern.
*
an asterisk means any string of characters
?
a question mark means a single character
[ ]
square brackets can be used to designate a group of characters
More details about this are given in the Linux shorthand and shortcuts '''section below.
10
Figure 9: The detailed output of the command ls when run with the -l flag
drwxr-xr-x 6 manager
users 4096 2008-08-21
09:26 twilliams
-rw-r–r– 1
manager
users 9784 2007-03-19
14:09 hybInfo.txt
-rw-r–r– 1
manager
users 9784 2007-03-19
14:09 targets_v1.txt
-rw-r–r– 1
manager
users 7793 2007-03-19
14:14 targets_v2.txt
File
type
File
permissions
User
Group
File
size
Date and time
modified
Filename
(Exercise 1-3, continued)
b) Try these commands that use wildcards to match multiple files:
●
List all the files in the directory bioinf_files. that start with the letters tes
ls bioinf_files/tes*
●
List all the files in your directory that start with tes, and end in 1.embl, 2.embl or 3.embl
ls bioinf_files/tes*[123].embl
Learning about Linux commands
Most Linux commands have a manual page that provides information about the command and options that
can alter its behaviour. Many tasks can be made easier by using command options. A good rule of thumb is
to ask yourself whether what you want to do is something many others may have wanted to do. If the answer
is yes, then there may well be commands and options available to do that task.
Linux manual pages are referred to as man pages. To open the man page for a particular command, you just
need to type man followed by the name of the command you are interested in. To browse through a man
page, use the cursor keys (↓ and ↑). To close the man page simply hit the q key on your keyboard.
If you do not know the name of a command to use for a particular job, you can search using man –k
followed by the type of thing you are trying to do. An example of this is in exercise 1-3, part c).
(Exercise 1-3, continued)
c)
●
Look up the manual information for the ls command by typing the following in a terminal:
man ls
●
Skim through the man page. You can scroll forward using the up and down arrow keys on your
keyboard. You can go forward a page by using the space bar, and move backwards a page by using the b
key.
●
What does the -h option do? What about the -a option? What would running ls -lrt do?
●
Press the q key when you want to quit reading the man page.
●
Try running ls using some of the options mentioned above.
●
Look up some programs with man pages with the keywords “list directory”
man –k “list directory”
11
Basic Linux tips for filenames
•
Linux does not deal well with spaces in filenames!
Or to be more precise, Linux itself deals perfectly well with spaces and all manner of special characters in
filenames but many programs you’ll want to run on Linux do not, and if you’re talking about those files in
the terminal you’ll need to remember to quote them as described below. If you stick with letters, numbers,
hyphens, underscores and full stops, you will be fine.
Filenames with spaces in them are a common problem when transferring files to Linux from computers
running Windows, or Mac operating systems. Normally the simplest thing is to rename the files before you
work with them.
If you want to reference filenames with spaces in them, you will need to enclose the entire filename in
quotation marks so that Linux understands that the space is part of one single name.
Alternatively, you can “escape” the space using a backslash. For example, if I have a file called
my document
Linux will see this as two words, “my” and “document”.
But you could write either of the following to make it understand you mean a single file:
“my document”
my\ document
To avoid worrying about this, a common practice is to replace the space with an underscore. For example:
mv “my document” my_document
•
Everything is case sensitive
Linux systems consider capital letters different from lower case letters. The filename myFile is not the same
as the filename Myfile or myfile. You could have all three of these in the same folder.
There are some common naming conventions in place for biological data that you should try to follow. More
is said on this in the second part of this tutorial.
Getting the prompt back when running graphical applications from the
terminal
On an earlier page the command gnome-terminal & was suggested as a way to start a new terminal, but the
ampersand symbol was not explained. By default, when you run a command the shell expects that the
command will want to display text in the terminal window so it gets out fo the way until the command is
finished. Ending a command with & tells the shell to go immediately back to the prompt, not waiting for the
command to complete. This makes most sense when you expect the command to open up a new graphical
window. It is also possible, though more fiddly, to change your mind and get the prompt back while the
command is running.
Confusingly, some graphical programs will always signal the shell to keep going even if you omit the &
from the command. To demonstrate the default behavior we can use a very simple program called xcalc.
The following exercise will hopefully help you understand how all this works.
12
Exercise – understanding the function of “&”:
1. In a terminal, type the command xcalc
1. A basic calculator should appear. Try it out.
2. Try to type another command (eg. pwd) back in your terminal window.
3. Close the xcalc window and now see what happens back in the terminal.
2. Run xcalc again and leave it running. Now we’re going to get the terminal prompt back…
1. Back at the terminal, type Ctrl-z (ie. hold down Ctrl and tap z).
2. What message do you see? Hopefully you can run commands again.
3. Try using the calculator.
4. In the terminal, give the command bg and try using the calculator again.
3. Run xcalc once again with an ampersand after the command – xcalc &
Linux shorthand and shortcuts
Understanding Linux commands can seem daunting at first. This is in part due to particular characters (full
stops, question marks, etc.) having special meaning in commands. Once you learn the basics, these shorthand
characters are extremely useful and time saving.
The following incomplete list covers the symbols you will see most often today and describes their meanings
as you will most likely encounter them in this course.
*
matches any character appearing 0 or more times, also known as a wildcard
ls mydir/*
list all the files under the directory mydir
ls cat*
list all files starting with the letters cat
ls cat*hat
list all files starting with the letters cat and ending in hat
?
matches a single character
ls cat??hat
list all files starting with the letters cat followed by any 2 letters,
and then hat
.
the directory you are currently in – ie. the last one you moved to using cd
..
the directory one level above the one you are currently in, aka. the parent directory
~
shorthand for your home directory, eg. /home/live
$var
dollar sign indicates a variable substitution, even within double quotes
– see the section on environment variables
!
used for history substitution – not covered in this course
-
often seen preceding a parameter (eg. ls -l)
also, the command cd - is a special case meaning “cd to previous directory”
;
a semicolon can be used to separate two commands on the same line;
it is also used when writing loops – see p59
More Basic Linux Commands
13
A list of common Linux commands is provided in Appendix D of this document for reference.
Changing directories
The command used to change directories is cd
If you think of your directory structure, (i.e. this set of nested file folders you are in), as a tree structure, then
the simplest directory change you can do is move into a directory directly above or below the one you are in.
To change to a directory one below you are in, just use the cd command followed by the subdirectory name:
cd subdir_name
To change directory to the one above your are in, use the shorthand for “the directory above” ..
cd ..
If you need to change directory without worrying where you are now, you could explicitly state the full path:
cd /usr/local/bin
If you wish to return to your home directory at any time, just type cd by itself.
cd
And finally, you can type
cd –
This returns you to the last directory you were working in before this one.
If you get lost and want to confirm where you are in the directory structure , use the pwd command (print
working directory). This will return the full path of the directory you are currently in. Also by default in Bio-
Linux, you see the name of the current directory you are working in as part of your prompt.
For example, when you first opened the terminal in a live session you should see the prompt:
live@biolinux[live]
This means you are logged in as the user live on the machine named biolinux, and you are in a directory
called live. (Recall that the full path of your home directory is /home/live.)
If you move into the bioinf_files directory
cd bioinf_files
you would see the prompt:
live@biolinux[bioinf_files]
14
Exercise 1-4
●
Ensure you start in your home directory by using the cd command on its own. Change directory from
your home directory to the directory bioinf_files by typing
cd bioinf_files
●
Find the full path to where you are by typing
pwd
●
Type cd bioinf_files a second time. Why doesn’t this work?
●
Change directory into the /usr/bin directory by typing
cd /usr/bin
●
List the files in this directory.
This is the main directory of runnable programs on the system.
Some bioinformatics software can be found in here. Others are in /usr/local/bin
●
How can you get back to the bioinf_files folder from here? Can you work out how to do it with a
single command?
Tab completion
Tab completion is an incredibly useful facility for working on the command line.
The main thing tab completion does is complete the filename or program name you have started typing,
saving you typing time and reducing spelling errors.
For example, from your home directory, you could type:
cd bio
and hit the tab key.
If there is only one directory with a name starting with the letters “bio”, the rest of the name will be
completed for you. Here this would give you:
cd bioinf_files
The terminal environment on Bio-Linux is set up such that if there is more than one file with that
combination of letters, all the files will be shown to you. You can choose the one you want by typing more of
the filename, or by continuing to hit the tab key multiple times.
15
Exercise 1-5
●
Return to your home directory if you are not already there by typing cd
●
Type cd bio and use tab completion for the rest of the command. Only then press the return key.
●
You will now be in the bioinf_files directory.
●
Type ls testseq and use tab completion. This will show you a list of files that start with testseq.
You now have the option of completing the filename yourself, or “tabbing” through the filenames
available.
●
Press the tab key a number of times to see what happens.
●
Type ls c and press tab once to view the files available.
●
Type a further a such that you now have ls ca on the command line.
●
Now press the tab key again.
As you get faster with this, it will save you a lot of typing effort. Also, tab completion knows how to
escape spaces and other non-standard characters in file names for you.
Exercise 1-6
In the previous exercise tab completion was finding files in the working directory, but it can also help
you find command and program names because the system knows that the first word you type is going
to be a command name.
●
Type a on the command line and then press the tab key.
●
Add rte to the a so that you now have arte on the command line. Press the tab key again.
●
You will see that there is only one command that starts with these letters: artemis
For programs that might contain case sensitive names, tab completion can be especially useful.
●
Type bl on the command line and press the tab key. You will see a number of program names listed.
●
Keep pressing the tab key to see how the filenames will cycle through on the command line.
16
Command history
Previous commands you have used are stored in your history. You can save a lot of typing by using your
command history effectively. If you use the up arrow key when you are at the prompt in your terminal, you
can see previous commands you have run. This is particularly useful if you have mistyped something and
want to edit the command without writing the whole command out again.
You can also view past commands using the command history. By default, history will return a list of the
last 15 commands run. You can add a number as a parameter to the command to ask for longer or shorter
lists. For example, to return the last 30 commands run, you would type:
history -30
It is possible to “speed search” previously-executed commands by pressing the key combination:
Ctrl-r (ie. hold down Ctrl and tap the R key)
Then start to type. The command history will be scanned and the last matching command will be displayed
on the console. Type Ctrl-r repeatedly to cycle through the entire list of matching commands.
Exercise 1-7
●
Type history -n 10 on the command line.
●
Type Ctrl-r, then start typing ist.
Making a directory
To make a new directory, use the command mkdir (make directory). For example:
mkdir newdir
would create a new directory called newdir.
Exercise 1-8
●
Start in your bioinf_files directory.
●
Make a new directory called testdir
The graphical view of your account should immediately update to show this new directory.
●
Move into the new directory testdir
●
Move straight back into the bioinf_files directory using a single command. (see the shorthand and
shortcuts section above for a hint)
17
Office software
Leaving the command line for a short while… There are a number of word processors and spreadsheet
programs available for your system. In this course we will look at the LibreOffice suite of programs,
previously known as OpenOffice. This is an open source alternative to Microsoft Office and can be run on
both Linux and Windows.
The programs within LibreOffice can be run graphically from the icons in the Dash toolbar.
Exercise 1-9
●
Click on the LibreOffice Calc Spreadsheet icon.
●
Under the File menu, click on Open.
●
Look inside the bioinf_files directory.
●
Open the file called example.xls.
●
Make a few changes and save the file using the Save or Save As… options under the File menu.
●
Close LibreOffice Calc by choosing Exit from under the File menu.
18
Text files, Word Processors and Bioinformatics
Documents written using a word processor such as
Microsoft Word or LibreOffice Write are not plain text
documents. If your filename has an extension such as
.doc or .odt, it is unlikely to be a plain text document.
(Try opening a Word document in notepad on Windows if you want proof of this.)
Word processors are very useful for preparing printed documents, but we recommend you do not use them
when working with bioinformatics data files.
There is a handy command called simply file that will inspect a file and tell you what it looks like. If you
run this on a FASTA file it will say “ASCII text” because FASTA is a plain text format. If it says "binary
data“ or ”HTML“ or ”OpenDocument Text" or whatever then this is not actually a FASTA file, even if it
resembles one when viewed in soem applications.
Word processor
Spreadsheet
Presentation editor
Figure 10: LibreOffice Applications in the dash toolbar
Using text editors
Plain text files are important, both as input to bioinformatics programs and as input or configuration files for
system programs. We highly recommend that you learn to use a text editor to prepare and edit plain text
files.
There are a number of different text editors available on Bio-Linux. These range in ease of use, and each has
its pros and cons. In this practical we will briefly look at two editors, nano and gedit.
Nano
Pros:
very simple – for example, most command
options are visible at the bottom of the
window
can be used right in the terminal without
graphical support
fast to start up and use
supports syntax hilighting
Cons:
due to simplicity, lacks some advanced
features – eg. line numbering, search by
pattern
it is not completely intuitive for people who
are used to graphical word processors
Gedit
Pros:
very easy to start using
supports syntax hilighting
looks similar to a word processor, but is in
fact a powerful text editor.
has many useful plugins that you can easily
install
Cons:
it is a graphical program and cannot be run
from a text-only environment
it is slightly slower to start up than non-
graphical editors
for real power users, it’s not a match for Vim
or Emacs
As most users will work on Bio-Linux using a graphical environment, we will only use Gedit in the exercise
for this section.
Exercise 1-10
Editing a file with Gedit
To start up Gedit, you can use the command line, or find it in the Dash menu. Choose one of the two
methods to open gedit:
Command line
Type gedit &
Graphical menu
Click the Dash Home at the top left of the screen, then type edit and click the Text Editor icon.
●
Type three or four lines of text into the gedit window.
●
Save your file using the save option under the File menu (note, you have to move your mouse right to
the top of the screen to see this) or simply click the Save button on the Toolbar. Save it as
myfirstfile.txt in your testdir directory.
19
Exercise 1-10 continued
To save a file under the testdir directory, you may have to click on the drop down arrow to Browse for
other folders. This will expand this section into a File Browser like the one you’ve seen in past exercises.
Simply browse through to the location testdir is in and click the Save button.
●
Add a new line to your file and save the file again using the Save As… option under the File menu.
Save this file as mysecondfile.txt in the testdir directory.
●
Add more functionality to gedit by choosing the menu options; Edit → Preferences. A pop-up box
will appear with 4 tabs:
View
Editor
Font & Colours
Plugins
Seeing the line numbers in a file helps to keep track of your position in that file. We will enable line
numbers here.
●
On the View tab enable Display line numbers. Now you can see the line numbers on the left.
●
Next, click on the Plugins tab and enable the Change Case and the Document Statistics plugins.
Browse around the other plugins and see what functionality they provide.
●
Under the Tools menu, click on Document Statistics.
●
Try out the other newly added plugin, by selecting a piece of text from the document you are editing
with the mouse and click on the Edit menu. Hover the mouse over the Change Case menu and choose one
of the options you are presented with.
●
Change part of one of the lines in this file and save it again using the Save As… option under the File
menu. This time save it as mythirdfile.txt in the testdir directory.
●
Quit gedit by choosing the option Quit under the File menu.
Reading text files
There are many commands available for reading text files on Linux/Unix. These are useful when you want to
look at the contents of a file, but not edit it. Among the most common of these commands are cat, more, and
less.
cat simply prints out a whole file in the terminal, which is often a very useful thing to do. However, cat
streams the entire contents of a file to your terminal at once and is thus not that useful for reading long files
as the text streams past too quickly to read. (Note – cat is short for concatenate because if you give it
multiple files it will string them together in order before printing them.)
more and less are commands that show the contents of a file one screenful at a time. less has more
functionality than more; specifically it can scroll backwards, hence the name.
With both more and less, you
can use the space bar to scroll down the page, and typing the letter q causes the program to quit – returning
you to your command line prompt.
Once you are reading a document with more or less, typing a forward slash / will start a prompt at the
bottom of the page, and you can then type in text that is searched for below the point in the document you
were at. Typing in a ? also searches for a text string you enter, but it searches in the document above the
point you were at. Hitting the n key during a search looks for the next instance of that text in the file.
20
With less (but not more), you can use the arrow keys to scroll up and down the page, and the b key to move
back up the document if you wish to.
Exercise 1-11a
●
Move into the bioinf_files directory.
●
Read the file hsy14768.embl using the commands cat, more and less.
Don’t forget that tab completion can save you typing effort.
cat hsy14768.embl
more hsy14768.embl Use the spacebar to scroll down
Press q to quit.
less hsy14768.embl
Use the spacebar to scroll down, b to go up a page, and the up and
down arrow keys to move up and down the file line by line.
Press the / key and search for the letters sequen in the file.
Press the ? key and search for the letters gene in the file.
Press the n key to search for other instances of gene in the file.
In almost all cases, if you want to look at a file in the terminal you want to use less. The cat command is
more usually used in conjunction with other commands or when you actually want to concatenate files. The
more command does nothing that less can’t do.
An important note on line endings – CR and LF
There is one major gotcha when working with text files, and it stems from a decision made way back in the
olden days of line printers. To print a text file on such a device, you would send the raw text file directly
down the serial line to the printer and at the end of each line you sent two control codes, one to advance the
paper (line feed) and the other to move the print carriage back to the start (carriage return).
In MS-DOS, later Windows, both these codes were embedded in standard text files at the end of every line.
In UNIX, and later Linux, a single LF character is used to indicate a newline. On old Macs it was a single
LF. New Macs use the UNIX convention, so text files with single LF newlines are rare.
Many programs on Linux are written to deal with all these conventions – they just helpfully regard any
combination of CR and LF as meaning “next line”. Others are not, and will either complain the file is invalid
or worse will try to process the extra characters as meaningful data and produce nonsense results. You don’t
need this hassle so, much like we recommended removing spaces from filenames above, we also recommend
ensuring all your text files are in order before attempting any bioinformatics on them. The next exercise
shows how you might do this.
21
Remember the man pages
There are many command line options available for each of the above commands, as well as
functionality we do not cover here. To read more about them, consult the manual pages:
man cat
man less
As you’ll see, the manual pages are actually displayed for you using less.
Exercise 1-11b
●
In Gedit, open the file hexaseqs.list which is provided in bioinf_files.
●
Without editing the file, save it as a new file named hexaseqs_crlf.list but on the Save As dialog switch
the Line Ending option to Windows.
●
Try these commands in order:
○
file hexaseqs.list hexaseqs_crlf.list
○
ls -l hexaseqs.list hexaseqs_crlf.list
Note the difference in file sizes in the fourth column
○
cat hexaseqs.list
○
cat hexaseqs_crlf.list
○
cat -A hexaseqs.list
○
cat -A hexaseqs_crlf.list
●
Now run these. Remember that the * in a filename is a shorthand to match multiple files at once. Don’t
worry about the specific meaning of the sed command but do ensure you type it exactly like as shown.
○
sed -i “s/\r//” hexaseqs*.list
○
file hexaseqs*.list
In summary:
○
The line endings problem is a historical annoyance that won’t go away.
○
The file and cat -A commands are the quickest ways to detect troublesome CRLF line endings.
○
Using Gedit and saving with the Unix/Linux mode is the simplest and safest way to remove
them.
○
The command shown above using sed (sed is a handy tool but we don’t really have time to cover
it in this course) can quickly strip all the CR characters from multiple files in one go. It’s safe to
run this on any regular text file, but if you run it on, say, and Excel file or an image or a .zip or
.tar.gz file then the file will effectively be destroyed.
Copying files
The basic command used to copy files using the command line is cp. At a minimum, you must specify two
arguments: the name of the file to be copied, and where you wish to copy the file to.
The main things to know about using the cp command are:
•
if you provide the name of an existing directory as the second argument, the file named in the first
argument will be copied into that directory.
•
otherwise, it will be assumed that the second argument is the new name to be used for the copy you
are making, whether the name corresponds to an existing file or not
•
if you provide more than two arguments to cp, the final argument needs to be the name of a directory
that already exists and all the preceding arguments need to be files that will be copied to the
directory
Examples (try these in the bioinf_files folder if you like, or go straight on to 1-12):
cp unknown.fasta my_new_file.fasta - clones unknown.fasta with the new name my_new_file.fasta
22
cp unknown.fasta my_new_directory - probably not what you wanted! It just makes another file.
mkdir an_actual_directory
cp unknown.fasta an_actual_directory - copy unknown.fasta into an_actual_directory you just made
cp *.embl an_actual_directory - copy all the .embl files into the new directory in one go
To copy whole directories, with all the subfiles and subdirectories, use the –R option, (meaning recursive).
cp –R an_actual_directory foo - copy directory and its contents as a new directory, foo
The Linux shorthand for “this directory right here” (a dot . ) and “the parent directory” ( .. ) comes in handy
when copying:
cd foo
cp –R ../blastdb .
copy blastdb from the directory above and put the copy here in foo
Make sure you leave a space between the directory name and the final dot.
Also useful is the shorthand for someone’s home account. e.g. instead of having to know and type the
location of their account, you can use ~username In the case of your own account, you use just the ~
symbol, followed by a / if you want to specify any subdirectories in your account.
(note the next two examples don’t work on the demo system as the files are not in place)
cp ~user2/somefile .
copy the file somefile from user2’s home directory to my
current working directory. Note that you need the appropriate
permissions to do this!
cp ~/Documents/mytext . copy the file or directory called mytext from within my Documents
directory to my current working directory.
Exercise 1-12
●
Move into your directory testdir from exercise 1-8.
●
List the files in this directory.
●
Make a copy of myfirstfile.txt called test.txt
●
Make a copy of mythirdfile.txt called myfourthfile.txt.
●
Make a directory called subdir.
●
Copy mysecondfile.txt into subdir
●
Copy all the files that have the letters fil in the name into the subdir directory.
●
Move back into the bioinf_files directory
●
Copy all the files that start with the letters tes and end in .embl into the directory subdir.
Linking to files
Sometimes you want to access a file or directory at a different location but you don’t actually want to copy it.
For example if you have a data file in a system folder or network drive that you want to be able to access
quickly from your desktop, but you don’t actually want the entire file to be copied to your desktop folder:
23
ln -s /usr/local/bioinf/sampledata/nucleotide_seqs/multiple_seqs.fasta ~/Desktop/multiple.fasta
If you now try to open multiple.fasta in any application (eg. Gedit), you will see the data from the linked file
as if you accessed it directly. If you write to the link you will be writing data straight to the original file (but
in this case you will not have permission to do so).
You can examine links using the long output mode of ls.
ls -l ~/Desktop/multiple.fasta
lrwxrwxrwx 1 live live 35 2011-05-12 11:46
/home/live/Desktop/multiple.fasta ->
/usr/local/bioinf/sampledata/nucleotide_seqs/file1.fasta
The initial letter ’l’ shows we are dealing with a link. Links do not have their own permission settings so ls
shows them all as enabled, but links do have an owner depending on who created them. The target of the
link is shown last. The target can be any file, directory or even another link. Note that Linux will not stop
you from making a link where the target is non-existent or inaccessible, but ls will help you to spot these
“dangling links” by colouring them in red.
Removing files and directories
The key difference between deleting something from the command line and using the graphical file browser
is that in the first case the file vanishes immediately, but in the second it will be stored for a while in the
Rubbish Bin and can be retrieved.
Option 1: Using the command line (effect: deletes files from the system)
To remove a file or files, use the rm command followed by the name of the file(s) you wish to delete.
rm file1
rm file2 file3 file4
rm foo/*
remove all files in foo but not the directory itself
To remove an empty directory, you can use the rmdir command:
rmdir thisdir
If that directory contains any files, you will not able to delete the directory using rmdir until you have
deleted all the files within it. To delete a directory and all the files in it at the same time, use the rm
command with the option -r (for recursive)
rm –r fulldir
If you use the above command on Bio-Linux, you will be prompted to confirm that you wish to delete each
file. While sometimes useful, this can be tedious. If you are certain that you want to delete all the files in that
directory, as well as the directory itself, then you can combine the recursive flag with the force (-f) flag
rm -rf anydir
So if you are 100% confident that you will never make a mistake, you can use rm -rf for all deletions, but
for mere mortals it is good practice to use the more specific commands, as this can mitigate mistakes.
Option 2: Using the File Browser (effect: moves files into the Rubbish Bin)
If you are in the graphical file browser, just find the file you wish to remove, right click on it and choose the
Move to Rubbish Bin option or else press the Delete key on the keyboard. Note that this file will not be
24
removed from your system, only hidden, and can be retrieved via the Rubbish Bin icon in the bottom right of
the screen.
If you were deleting the file to make space, you now have to empty it from the Rubbish Bin to actually get
the disk space back. You can remove the file permanently in one go by holding down the Shift key on your
keyboard and while keeping this key depressed, pressing the Delete key. A message box will pop up asking
you to confirm that you really wish to permanently delete your file.
Exercise 1-13
●
Move into the testdir directory.
●
Delete mythirdfile.txt using the command line
●
Delete myfourthfile.txt using the graphical file browser. Is the files now sitting in the Rubbish Bin?
●
Back on the command line, move back into your Home directory.
●
Then delete myfirstfile.txt from testdir without moving back to the testdir directory.
●
Delete the entire testdir/subdir directory without being prompted about the deletion of each file
individually.
Redirecting output to files
You have seen how the 'cat command can take the contents of a file and put it straight into the terminal, but
we can also do what is essentially the opposite and capture output that would normally go to the terminal and
put it in a file. This is done by the redirection operator >. For example:
ls > file_list.txt
In this case the output of ls will not appear on the screen but you will see a new file called file_list.txt. If
you cat this file or open it in gedit you’ll see the file list. Note that the result is no longer coloured, as there
is no way to represent colour information in a plain text file, and has been formatted into a single column list,
but otherwise is identical.
25
Notes on Reading, Copying and Removing Files and Directories
On Bio-Linux the commands cp, mv and rm have been aliased to cp –i , mv –i and rm –i respectively.
This means the system will ask you if you really mean to overwrite files should the situation arise with cp or
mv, or delete the file you have just asked to delete when using rm. You must respond with a y or Y if you do
wish to proceed. Hitting any other key will cause the action you requested to be ignored.
You cannot assume that any other Linux/Unix systems you work on will be configured this way, but you can
always set these settings yourself.
Piping output between applications
A remarkably powerful facility on the Linux command line is the ability to take the output of one command
and use it directly as the input to another command. This is referred to as piping the output of one command
into another command.
The vertical bar symbol used for this is called a pipe and looks like: |
Standard UK PC keyboards have the pipe symbol on the same key as the backslash symbol, at the bottom,
left hand side of the keyboard. So pressing the Shift key and the backslash key together will give you the
pipe symbol.
On some keyboards, the pipe symbol is at the top left hand side, on the same key as the backtick. To type a
pipe symbol on such keyboards, hold down the key Alt Gr and hit the back tick ( ` ) key (left of the number
1 key).
An example of when you want to use a pipe would be if you wanted to list all the files in a directory, but
there are too many to fit on a single page. You probably saw this when you listed the contents of /usr/bin
back in Ex. 1-4.
You can pipe the output of the ls command (a list of files) into the less command, which will allow you to
view the list page by page. To list the files in /usr/bin and view them page by page, the command would be:
ls /usr/bin | less
Another useful command to use with pipes is the wc command, which stands for wordcount. By default, wc
returns the number of newlines, words and bytes in a file. Or you can tell wc to return just the number of
lines by using the -l parameter (see the manpage for wc).
For example, you could find out how many files you had in a directory by typing:
ls | wc -l
26
Diff, Grep and Sort
In this section, we look briefly at three very useful commands: diff, grep and sort. As with all the commands
covered today, we recommend that you read the manual page for more information about how these work
and what options are available.
Diff
diff compares files line by line and reports the differences between the files. In fact, diff can be used for
more involved tasks as well, like comparing the contents of directories. This can be very useful when you are
looking for changes that you or someone else has made.
Exercise 1-14
●
Move into the testdir directory.
●
Type diff test.txt mysecondfile.txt to see what diff reports to you.
●
Type cat mysecondfile.txt | diff - test.txt
In the above command the hyphen (-) refers to the information being given to diff through the pipe. That is,
the information resulting from the command cat mysecondfile.txt is put directly into the diff command.
Obviously, in this instance it would be easier just to give the name of the file, mysecondfile.txt, but there
are many instances where being able to use – to mean “what I am sending in via the pipe” can be useful.
Grep
grep stands for global regular expression print; you use this command to search for text patterns in a file
(or any stream of text). Eg try this.
grep “adge” /usr/share/dict/words
You can also use flexible search terms, known as regular expressions, in your grep searches. You have
already used glob pattern expressions in this practical, but regular expressions are somewhat different and
more powerful. For example, when you listed all files with the pattern tes*embl* you were using a glob
pattern comprising explicit characters (e.g. tes) and special symbols (* meaning any character or characters).
The equivalent in grep would be “tes.*embl.*” where the period signifies any single character and the *
signifies any number of repeats.
Therefore to convert from a shell glob pattern to a regular expression replace each * with .* and each ? with .
. You also need to enclose the expression in quotes to tell the shell not to try and interpret it as a glob.
Unmodified glob patterns fed to grep but will not work as intended. For example the pattern tes* in grep
means te followed by any number of s characters in sequence (te, tes, tess, tesss, …). The question mark
now signifies optionality – so tes? means te followed by zero or one s character (te, tes). Regular
expressions are found in several places other than grep, most notably in the Perl scripting language. The full
syntax is extensive and powerful but is beyond the scope of this course, so back to the grep command itself…
grep requires a regular expression pattern as a parameter, and prints all the lines in a file containing that
pattern.
grep is especially useful in combination with pipes as you can filter the results of other commands.
For example, perhaps you only want to see only the information in an EMBL file relating to the origin of the
sequence, that is, the DE line. You do not need to search the file in an editor, you can just grep for lines
beginning in DE, as in the next exercise.
27
Exercise 1-15
●
While in the bioinf_files directory, type the command: grep “DE” hsy14768.embl
What is this command doing?
Can you see why the above command results in the output you see?
An explanation of this command can be found below this exercise box.
●
Try the commands: grep “^DE” hsy14768.embl and grep -x “DE.*” hsy14768.embl
What are the ^ symbol and the -x parameter in these commands doing?
Check the manpage for grep to be sure.
●
Try the command: cat hsy14768.embl | grep “^DE”. Does that do what you expected?
●
Move to your home directory and type ls –lR
Read the manual page for ls if it is not clear what this command returns.
●
Use the above command with a pipe and a grep command to search for files created or
modified today.
●
List the files in the bioinf_files directory and use the grep command to look for those containing the
characters d4.
The first command in the previous exercise searches all the text in the hsy14768.embl file and returns the
lines in which it finds the letter D followed by the letter E.
The second command in the exercise also returns lines in the file that have a letter D followed by a letter E,
but only where DE is found at the beginning of a line. This is because the ^ symbol means “match at the
beginning of a line”. The $ symbol can be used similarly to mean “at the end of a line”. These are known as
anchors. Passing the -x flag to grep tells it to automatically anchor both ends of the search pattern.
What this anchoring does in the example above is return to you just the organism information in the embl
file. This is because none of the other lines returned in the previous command started with DE, they just
contained DE somewhere in them. This is an example where knowing how information is stored in an given
file, along with a few basic Linux commands, allows you to retrieve information quickly.
Another common example is counting how many sequences are in a set of multi-fasta files. We can do this
with pipes between the commands cat, grep and the ever-handy wc, which here we use to count lines found
by grep.
cat *seqs.fasta | grep “^>” | wc -l
Each sequence in a fasta file starts with a header line that begins with a > . The above command streams the
contents of all files matching the glob pattern *seqs.fasta through a search with grep looking for lines that
start with the symbol > . The quotes around the pattern ^> are necessary, as otherwise it is interpreted as a
request for redirection of output to a file, rather than as a character to look for. As before, the ^ symbol
means “match only at the beginning of the line”.
The output of this grep search is sent to the wc command, with the -l indicating that you want to know the
number of lines – ie. the number of headers and by implication the number of sequences.
So a synopsis of the command above is: Read through all files with names ending seqs.fasta and look for all
the header lines in the combined output, then count up those lines that matched and return the number to
screen.
We cover sequence formats later on in part 2 of the tutorial.
28
Environment Variables
We have seen that the way commands run can be modified by the options passed on the command line.
Some commands also read values called environment variables which affect their behaviour. Environmental
variables are set within the shell via the export command and are passed to any processes you run. This is
useful when you want to set some parameter that is common to all invocations of a command, or applies
across several commands. For example, your favourite text editor may be, say, Gedit, or Nano, or Vim, or
Emacs. In the shell you can say:
export EDITOR=vim
Now any command that wants to run a text editor knows what your preferred editor is. Within the shell you
can get at the current value of en environment variable by prefixing it with a $ sign, eg.
echo $EDITOR
prints the current value of the EDITOR environment variable to the screen
The printenv command dumps all environment variables. Note that environment variables are only set in
the current shell and are not saved by default, so if you run a command in another terminal or close and
restart the terminal any values you set will be lost. For information on making the settings permanent by
editing your .zshrc file see the user guide under Supported Shells.
Exercise 1-16
•
Give the command: export VAR1=hello (with no spaces around the = sign) then:
◦
echo $VAR1
◦
echo $ VAR1
◦
echo “$VAR1”
◦
echo ’$VAR1’
•
Start a new terminal window by typing: gnome-terminal &
◦
Within this new terminal: echo $VAR1
•
Start a second new terminal by right-clicking the icon in the Dash and selecting New Terminal
◦
Within this new shell: echo $VAR1
•
Go back to the original shell window
◦
unset VAR1
◦
echo $VAR1
•
Has this affected either of the other two shells you started? Check them:
◦
echo $VAR1
Environment variables are inherited when one process starts another, much like genetic material is inherited
when a cell divides. Hopefully this explains the behaviour you see in the exercise above. When you start a
terminal from en existing shell it inherits the environment from that shell. When you start one from the
system menu it inherits just the base system environment. Furthermore, once a program is running no
external program can modify its environment variables.
29
Changing permissions on files and directories
Every file on the system has a set of permissions on it that dictate who on the system can read, change or
delete, or execute the file. By default, all the files you create in your account are readable, changeable or
executable by you. However, you can grant other users permissions to access parts of your account if you
wish.
Below is some basic information about file permissions. Since there is only one user on the live system this
isn’t really relevant to your current setup. If you are working on a shared system and want to set up access to
your files for other people on the system, please get advice from your system administrator.
The command to change permissions is chmod. You have to specify who you are modifying the permissions
of, what the new permissions are, and what file or directory to act on.
The format of the chmod command is:
chmod who ± permissions filename(s)
who can be:
u
means user and refers to the owner of the file
g
means group, and refers to the group the file belongs to
o
means others, everyone on your systems apart from those above
a
means all three, i.e. user, group and others
permissions can be:
r
means read permission
w
means write permission
x
means execute permission
Each user has a default group and possibly extra group memberships. Use the id command to view your
group memberships. When you create a new file it will be owned by you and by your default group. If you
are a member of additional groups, you can switch the file to any of those groups using the chgrp command.
(Please refer to the manual pages for the commands chown, chgrp and chmod for more on this topic.)
For simplicity, let us assume that you and a co-worker have both been put in the default group labusers and
wish to share your data files found in ~/bioinf_files.
chmod a+x ~
give permission to anyone to execute, in this case, so
that they can move through, your home directory.
chmod g+rx ~/bioinf_files
give permission to people in the group to access files in the
bioinf_files directory under your home directory, including
listing the files with ls
chmod g+r ~/bioinf_files/*
give permission to people in the group to read the files in the
directory
The first command could have been “chmod g+x ~”. This would unlock your home directory only to users
in the labusers group. However, enabling access for anyone is generally safe, as long as permissions on the
files and subfolders prevent anyone from actually accessing them, and unless you set a+w in addition to a+x
nobody but you will be able to list the files in your home directory.
30
Some other useful information
Copying and pasting text
Most Linux applications, including the shell terminal windows, have Copy and Paste options in the Edit
menu or available in the pop-up menu when you click the right mouse button. You can copy text within
the application or between different applications. There is also a quick way to copy text within the
terminal by highlighting text to select it, and using the middle mouse button to paste the text.
The exact way to select, copy and paste text from within a terminal windows depends on how your mouse
has been set up. Normally you would highlight text by dragging the mouse across it with your left mouse
button depressed to copy the text, and paste by clicking the middle mouse button (or the two outer mouse
buttons pressed simultaneously). Note that within the terminal it doesn’t matter where you click the middle
mouse button – the text will always be inserted at the current cursor position.
The simple way to stop a process
Sometimes a command or program you run in the terminal goes on too long, or is obviously doing something
you did not plan. If there is no obvious way (such as a menu option or button) to stop the program running,
try using Control and c (more commonly written as Ctrl-c). i.e. hold down the Control key and hit the c
key. This requests the program to stop immediately, though the program may ignore the request.
Note that this is the same key combination used in most graphical applications for copying text. Remember
that highlighting text in a Linux terminal automatically copies it into the buffer – you don’t need to press
Ctrl-c before pasting with the middle button.
Putting a command to one side
Sometimes, you are in the middle of typing a long command, and you suddenly realise you need to do
something else in the terminal, like list the current directory contents or check the manpage, before you run
the command. Z-shell provides a handy shortcut for this: Alt-q. When you press Alt-q the current
command disappears and you have a new empty prompt, but the unfinished command has been remembered
and will reappear with the next prompt ready for you to edit and run it.
An alternative is to hit Ctrl-c. Within the shell, Ctrl-c does not cause the shell to exit but it does cause the
current command to be abandoned and a fresh prompt to appear. Unlike with Alt-q the unfinished command
will still be visible in the terminal display so you can select it and paste it back in with the middle button if
you decide you want it after all. (Try it!)
Logging out of a session
To logout, you can press the Power Icon on the far right of the top taskbar (Figure 2) and choose the Log
Out option.
To shut down the machine, you can choose the Shut Down option on the same menu. If you are working on
the console of a machine with users apart from you, then please check with your system administrator before
powering down the machine. Other people might want to log in remotely.
Clearing your terminal of text
Your terminal windows can fill up with lots of text, and it can become difficult to see the information you
want because of all the clutter. You can clear the terminal window by typing
clear
31
Accessing a running program or working with others interactively
If you just run a job and then close down the terminal you ran it from, normally the job will be terminated. It
would be nice to be able to leave a long job running and be able to log out and then log back in again to see
how it is progressing. This is especially true if you log in remotely via SSH and experience network
disruptions, or if you run programs that can take quite a long time, but ask you for input periodically.
Luckily, there is a tool that makes it possible to leave programs running with no danger of them terminating
if you log off or your terminal is closed. In addition, when you log back into your system, either locally or
remotely, you can “re-attach” to your earlier session so it feels like you are picking up where you left off, in
the same window you were running your program from.
The utility that allows you to do this is called screen. It must be run before you start running other programs
in your window. Screen can also allow two people on different machines to work in the same session – i.e.
Real time collaborative editing is possible with screen.
Unfortunately, how to work with screen is beyond the scope of this course. However, the link below provides
a useful beginners tutorial about screen and multi-user sessions:
https://www.linode.com/docs/networking/ssh/using-gnu-screen-to-manage-persistent-terminal-
An extensive list of command options can be found in the screen manpage (ie. type man screen).
Accessing your machine – including a full graphical desktop - remotely
Bio-Linux is set up for secure remote access. We can’t demonstrate this on the Live system but it is well
worth knowing that if you have an installed Bio-Linux system you can connect to it securely over the
network, so long as your account is enabled in the ssh group and you have network access to the machine (ie.
not blocked by a site firewall)
You can connect to your (installed) Bio-Linux system remotely using X2Go software. If you download an
X2Go client to another Windows, Linux or Mac system, you can connect to an installed Bio-Linux system
and run a full, graphical, desktop session remotely. Further details on how to do this can be found on the
website at:
http://environmentalomics.org/bio-linux-remote-access
Note that due to limitations of the remote protocol, X2Go will use a fallback desktop “MATE” session which
is slightly different to the default “Unity” desktop environment described in this tutorial.
32
There are many useful commands available on Linux and we cannot begin to cover them in this course. We
recommend that you consider buying a book to help you learn how to use Linux efficiently.
Part Two: Introduction to Bioinformatics on Bio-Linux
This section of the tutorial introduces you to running bioinformatics software on Bio-Linux, including how
to find out what is available for particular types of bioinformatics tasks, some options you have for running
programs on the system, and where to find documentation about the software on the system. This course
does not cover the detailed use or understanding of any particular piece of software.
You should read through the general information in the next few pages, then look at which specific programs
are of most interest to you.
The main points we hope you take away after completing this section of the tutorial are:
a) You can discover and run bioinformatics tools even if you have not explicitly been taught
how to use them.
b) If you have repetitive tasks to carry out, chances are there are ways of fully or partially
automating them.
c) Web interfaces are easy, and have certain benefits, but a competence with the command line
gives you access to more possibilities and sometimes these will suit your needs better.
Documentation and Help for Bioinformatics Software on Bio-Linux
There are a number of sources of information about the bioinformatics software on Bio-Linux, including
●
Bio-Linux bioinformatics documentation
●
local copies of software documentation – look in /usr/share/doc
●
options under the help menus in some graphical programs
●
web pages
●
journal articles.
Bio-Linux Bioinformatics Documentation
Categorised information about bioinformatics software on the Bio-Linux system can be accessed via the
Bioinformatics Docs icon on the left hand side of your desktop. Software can be listed by name or by
functional category.
The information for each program includes an overview of what it does, with links to local documentation
when available, as well as links to information on the internet.
An apology – the Bioinformatics Docs are currently (in 2014) out-of-date and in severe need of
attention. The plan is to integrate this catalogue with the ELIXIR tools registry but this work will
take many months to complete.
This notwithstanding, we highly recommend that you read the documentation for any programs
you intend to run.
This is especially important for programs that use heuristic algorithms (methods involving some
level of approximation, such as BLAST), and those that output numerical results.
33
Exercise 2-1
●
Click on the Bio-Linux Documentation icon on the desktop, then on Bioinformatics Docs
●
Select a category under the Browse by Category section.
●
Click on the names of any of the programs that might interest you and view the information
in the resulting web page.
●
Return to the search form and click on the link to List all categories. This shows a view of
all the documented software according to the functional category (or categories) they are listed
in.
Please refer to the bioinformatics documentation throughout this tutorial to find out more about the
programs introduced, or look on-line. Most current software will have web pages and online resources
for users. For example QIIME has a very active user community.
If you know of a good information resource for a program on Bio-Linux that is not mentioned in our
bioinformatics documentation system, or you have any problems with the system, please let us know by
emailing us athelpdesk@nebc.nerc.ac.uk.
Help Functions within the Programs
Documentation is available from within many programs. For example, many graphical programs have a Help
menu or button; many command line programs provide help if you type the name of the program followed
by –h, –help or –help. Some programs even have their own manual pages that can be accessed by typing
man followed by the program name.
Example data for this tutorial
The sequences referred to in this tutorial can be unpacked from the file
/usr/local/bioinf/documentation/bio-linux/intro_course/bioinf_files.tar.gz.
If you have just done the associated Introduction to Linux tutorial, you will already have these files – please
move on to the next section of the tutorial.
If you have joined the tutorial at this point, please refer to Exercise 1-1, parts b, c and d to download and
unpack the necessary sample data files.
For some parts you will also need qiime_tutorial_data.tar.gz, mothur_tutorial_data.tar.gz and
assembly_taster.tar.xz which are available in the same directory.
34
Interface choices
Software can be run on the command line, via graphical programs on your computer, via web interfaces, via
web services and/or via scripts. Bioinformatics programs can often be run using more than one of these
options. Each type of interface has pros and cons. We have summarised some of these for reference below.
Interface
Pros
Cons
Command line
Type out the command
and press enter
Fast to run once you know the program
Very flexible; usually many options
Repetitive tasks are easy to run or automate
Easy to log in remotely and carry out tasks
Have to learn the syntax
Have to find out what options are available
Prompted command
line
Type out the command
and respond to
prompts on screen
Easy to run; don’t have to remember the
command line syntax
Easy to log in remotely and carry out tasks
Easy to forget the diversity of options for a
program because of the temptation to just
reply to prompts provided
Slower to get running than “pure” command
line
Graphical interface
Start the program and
interact via menus
Often more intuitive and visually pleasing
than the command line
Extensive help is often available via a menu
option or button
Some programs (not all!) can be run by
clicking an icon in the Applications |
Bioinformatics menu on your system.
Appropriate for visual tasks such as
alignment editing, detailed annotation
checking, etc.
Can be slower to use than the command line,
especially for repetitive tasks
For some programs, the command line
version provides more functionality.
You may need your system admin to set up
programs so that you can run graphical
programs when logging in remotely
Web interface
Run via a web browser
window, usually at a
remote site
Usually intuitive
Can provide functionality not available via
locally-run programs such as access to
important data resources or results presented
in useful formats, e.g. including links to
related data resources, graphics, etc.
Some websites allow a certain degree of
“pipelining”, where the outputs of one
program can intuitively be supplied as input
to another.
Can be slow to use relative to the command
line, especially for repetitive tasks
You are subject to the rules and restrictions
of the site you are working on (e.g. data
volume, number of tasks, options available,
etc.)
You may not want to send private data over
the internet (e.g. if you are applying for a
patent?)
You can be subject to the whims of network
connectivity
35
Web services
Runs tasks over the
internet from a
program, usually
locally installed or run
via java webstart.
Can bring together the ease of a locally run
program with the data and computing
resources of a remote site
Can be used via graphical programs or scripts
You are dependent on network connectivity
You are dependent on the consistency of the
remote server where the functions you need
are running
You are dependent on the functionality the
remote site offers; this may not be as
extensive as the functionality you get locally
for some programs.
Scripts
Using a small
program that runs a
program or programs
for you
Very flexible
Great for automating tasks
Great for carrying out customised tasks
Straightforward to learn enough to alter
existing scripts to do exactly the task you
want.
You have to write the script or find a script
that does the job. This means learning a
programming language (or asking someone
who knows one to help you)
General points about working with bioinformatics programs
Sequence formats
A simple thing that often trips people up is sequence formats. There are many different sequence formats;
the reasons for this are both historical and functional.
Historically, when people first started writing analysis programs for molecular data, they designed a format
that they felt suited their needs. As time went on, numerous formats came into existence. We live with the
legacy of this. We must know what format our data is in, and whether the program we want to run can use
data in that format.
Functionally, a program may require information that can be included with data held in certain formats, but
not others. For example, EMBL format files can, in addition to the sequence data itself, contain descriptive
information about a sequence, such as its features. In contrast, plain format contains nothing inside the file
except the sequence data, while FASTA format allows a small amount of information about a sequence to be
given in a header line and FASTQ adds read quality information alongside the sequence. Clustal and msf
formats handle multiple aligned sequences, while phylip and nexus format files contain aligned sequences as
well as information relevant to phylogenetic analysis programs.
36
For repetitive tasks, we highly recommend the use of the command line, workflow software and/or scripting.
To analyse data, it must be presented to the analysis program in a format the progam
understands.
This seems obvious, but frequent errors (or worse, misleading results) occur when the data entered into
a program is not appropriate.
Converting files to different sequence formats used to be a frequent, and often time consuming, task in
bioinformatics. Luckily there are file conversion programs that take care of this easily for many formats. In
addition, many program understand more than one format.
Some common bioinformatics sequence formats, along with common filename conventions used for those
formats, are listed in the table that follows the next section.
We recommend the following page for more information and examples of common bioinformatics file
formats:
http://www.molecularevolution.org/resources/fileformats
File naming conventions in bioinformatics
The suffix, (the part of the filename after the final dot), is often used to denote to you, and other people, what
the format of the data inside the file is.
For example, the common suffix for clustal formatted alignments is aln. .A bioinformatics file that ends in
.aln is usually assumed to be a clustal formatted alignment file.
Another multiple sequence alignment format is phylip. A common suffix used on files containing sequences
in phylip format is phy.
Common suffices used for files containing data in particular formats are listed in the table following this
section. We highly recommend that you follow conventions when naming your data files.
Benefits to following the convention for filename endings include:
●
You will know your data format just by looking at the name of the file.
●
Following standard conventions, (rather than making up your own naming system), makes it
easier for other people looking at your files, (e.g. collaborators, or people helping you); they will
know the data format just by looking at the name.
●
Some graphical programs have filters set so that only files with particular suffices will be
listed in the file browser window when you try to load some data. If you use conventional
filename endings, this is less likely to cause problems for you.
Certain programs use information in the filename to interpret aspects of the data, (not just the data format).
Such programs have strict naming conventions for the whole filename. For example, some sequence
assembly programs either require, or are benefited by, defined naming schemes for sequence traces. The
filename will inform them about which sequences are read pairs, what direction sequence reads are in, and
other information relevant to assembly or visualisation. You will need to read the program documentation to
find out what is required in such instances.
37
You are not restricted to naming your files in any particular way but we highly recommend that you
follow the convention for the type of file you are generating/saving.
Following file naming conventions from the beginning will save you, and your collaborators,
a lot of time!
Common bioinformatics file formats
Format
Some common
filename endings
Comments
Embl or
swissprot
.dat
.embl
.sprot
.swiss
Usually these files, along with genbank files, contain feature information
as well as sequence.
Embl and Swisprot (or Uniprot) format are the same. Embl files contains
nucleotide sequences and Uniprot files contain peptide sequences.
Files downloaded from EMBL or Uniprot websites use the suffix .dat.
Often these are compressed with gzip, and so end in .dat.gz
Files generated by individuals in embl format will tend to end in .embl.
Genbank
.seq
.gb
.genbank
These files, along with embl and swissprot files, usually contain feature
information as well as sequence.
Individuals using this format, usually use the .gb or .genbank suffix. The
NCBI usually uses .seq for genbank sections.
FASTA
.fasta
.fsa
.fa
Possibly the most common sequence format.
It may contain nucleotide or peptide sequence(s) and a single-line header
per sequence.
FASTQ
.fastq
.fq
Very common for NextGen reads. Like FASTA with extra quality info
per sequence.
Alternative extensions may indicate the type of sequencing technology
- .fastqsanger, .fastqsolexa, etc.
Plain
.pln
.staden
.sdn
Not commonly used, as the file contents contain nothing but the sequence
itself; the only identifier of the sequence is in the filename.
Staden programs use the plain format, accounting for the last two of the
file suffices given.
Clustal
.aln
Multiple sequence alignment format
Originally from the clustalw program, but now recognised by many
programs that accept or output multiple sequence alignments.
Phylip
.phy
.phylip
Multiple sequence alignment format
Used by the Phylip suite of programs and many others, especially those
associated with phylogenetic analysis.
Msf
.msf
Multiple sequence alignment format
This was the standard output format from some of the suite of programs
called GCG. The format is still sometimes used.
Other multiple alignment formats are more generally used and thus are
often a better option to choose if you have a choice.
Nexus
.nxs
.nex
Multiple sequence alignment format
Used by a number of phylogenetics programs.
GFF
.gff
A format for describing genes and other features associated with DNA,
RNA and Protein sequences. Not generally used as input for analyses.
38
Naming files and the danger of over-writing previous results
Many programs will suggest a name for your results file. Sometimes this name is generated by taking the
beginning of the name of your input file, and adding a new suffix. However, sometimes it is just a generic
name like prettyplot.ps or clustalw.aln. We encourage you to change generic names to something
meaningful.
Apart from the fact that filenames like prettyplot.ps give you little idea what is in the file, if you do not
change the name, the next time a file of the same name is generated, you will overwrite previous results.
A common problem: what is a text file and what is not
If you didn’t work through the section on text files in part 1 we suggest you do so now. This part reiterates
the key points.
Sequence data are usually stored in text or binary files. Text files contain data you can look at in a text editor.
Binary files are not human readable. The file formats referred to in the table above are all text formats.
Examples of binary formats include ABI sequences and SFF sequence files.
Word documents may look like text, but they aren’t. The letters you see on the page of a Word document
(or OpenOffice Write, or other word processing programs) are stored along with layout data in a binary
format.
Most sequence analysis programs expect text. Plain old, nothing fancy, text.
It is an unusual situation to need to use sequence data that has been stored as a Word document (if it is not
unusual to you, you are probably doing things the hard way!). To get a text document when using Word,
save it as text only.
39
Rule of thumb
If you are using Word or any other word processing program at any stage your work with sequences, then it is
very likely that your life could be made a lot easier.
Please seek advice about other ways to handle your data. You will almost certainly save yourself time and
frustration. Honest.
Exercise 2-2a
A useful Linux command to find out what type of file you are dealing with is file. This does not
look at the filename but interrogates the file contents directly.
●
In your bioinf_files directory is the file example.xls. Move into your bioinf_files directory
if you are not already there and try running the command
file example.xls
●
In the bioinf_files directory is a file called testseq1.embl. Try running the command
file testseq1.embl
GZipped files in bioinformatics
gzip is a simple compression program, which you met right at the start of this course when you unpacked a
.tar.gz file. Any file can be compressed with gzip and .fastq.gz is now particularly popular as it saves a lot of
disk space. Some programs deal with .fastq.gz files directly, but for others you have to gunzip them first.
You can unpack the file on disk or use pipe syntax to feed it directly to your application. The zcat command
prints out the uncompressed contents of a gzipped file, so something like
zcat some_file.fastq.gz | some_app -
will work in many situations. Remember that the “–” by convention tells the application to process the data
received via the pipe. This way you never have to store the big uncompressed file on disk.
bzip2 and xz are similar compression programs. The tools bunzip2/bzcat and unxz/xzcat are provided to
unpack these files from the command line, but if in doubt just click on the file in the File Browser. The
graphical File Roller application will know how to unpack these and more file types.
40
Examples of running bioinformatics programs on Bio-Linux
Analysing sequences with QIIME
QIIME (pronounced ‘chime’) is a pipeline for performing microbial community analysis that
integrates many third party tools which have become standard in the field. QIIME can run on a
laptop, a supercomputer, and systems in between such as multicore desktops. QIIME is now
included in the standard Bio-Linux distribution.
As an example, we will use data from a study of the response of mouse gut microbial communities
to fasting (Crawford et al., 2009). To make this tutorial run quickly on a personal computer, we will
use a subset of the data generated from 5 animals kept on the control ad libitum fed diet, and 4
animals fasted for 24 hours before sacrifice. At the end of our tutorial, we will be able to compare
the community structure of control vs. fasted animals. In particular, we will be able to compare
taxonomic profiles for each sample type, differences in diversity metrics within the samples and
between the groups, and perform comparative clustering analysis to look for overall differences in
the samples.
To process our data, we will perform the following steps, each of which is described in more detail
in the Data Analysis Steps:
Filter the sequence reads for quality and assign multiplexed reads to starting samples by
nucleotide barcode.
Pick Operational Taxonomic Units (OTUs) based on sequence similarity within the reads, and
pick a representative sequence from each OTU.
Assign the OTU to a taxonomic identity using reference databases.
Align the OTU sequences and create a phylogenetic tree.
Calculate diversity metrics for each sample and compare the types of communities, using the
taxonomic and phylogenetic assignments.
Generate UPGMA and PCoA plots to visually depict the differences between the samples, and
dynamically work with these graphs to generate publication quality figures.
What follows is a streamlined version of the exemplary tutorial provided by QIIME (which can be
found athttp://qiime.sourceforge.net/tutorials/tutorial.html). Further details and parameters on the
below commands and many more can be found at this site.
The material was compiled and adapted by Daniel Pass, School of Biosciences, University of
Cardiff, for Bio-Linux courses June 2011. Editorialised for QIIME 1.6 by Tim Booth, NEBC.
QIIME allows analysis of high-throughput community sequencing data
J Gregory Caporaso, Justin Kuczynski, Jesse Stombaugh, Kyle Bittinger, Frederic D Bushman,
Elizabeth K Costello, Noah Fierer, Antonio Gonzalez Pena, Julia K Goodrich, Jeffrey I Gordon,
Gavin A Huttley, Scott T Kelley, Dan Knights, Jeremy E Koenig, Ruth E Ley, Catherine A Lozupone,
Daniel McDonald, Brian D Muegge, Meg Pirrung, Jens Reeder, Joel R Sevinsky, Peter J
Turnbaugh, William A Walters, Jeremy Widmann, Tanya Yatsunenko, Jesse Zaneveld and Rob
Knight; Nature Methods, 2010; doi:10.1038/nmeth.f.303
41
Note: Commands to type are shown in grey boxes like this. Some commands in QIIME are too
long to print on one line, so where you see , you need to continue typing the command on the
same line.
Preparation
First, we must copy the tutorial data to your home directory and extract it:
cd
tar -xvzf /usr/local/bioinf/documentation/bio-linux/intro_course/qiime_tutorial_data.tar.gz
Entering the directory (cd qiime_tutorial_data) and listing the files (ls) will show what was
extracted:
Sequences (.fna)
This is the 454-machine generated FASTA file.
Quality Scores (.qual)
This is the 454-machine generated quality score file, which contains a score for each base in
each sequence included in the FASTA file.
Mapping File (Tab-delimited .txt)
The mapping file is generated by the user. This file contains all of the information about the
samples necessary to perform the data analysis. At a minimum, the mapping file should
contain the name of each sample, the barcode sequence used for each sample, the
linker/primer sequence used to amplify the sample, and a Description column.
custom_parameters.txt
Structured file which can be customised to easily tune each analysis.
qiime_tutorial_commands_serial.sh
This is a script which will run all of the commands that we are about to see without user
input.
Data
This directory contains the reference files required for alignment of the OTUs.
To begin working with QIIME, you must enter the QIIME shell by typing ‘qiime’ in your working
directory. This has been successful if the prompt changes to end in ‘qiime >’. The commands
below will only be recognised within the special QIIME shell.
Assign Samples to Multiplex Reads
The first task is to assign the multiplex reads to samples based on their nucleotide barcode. Also,
this step performs quality filtering based on the characteristics of each sequence, removing any low
quality or ambiguous reads. The script for this step is split_libraries.py, but before running it we
make a directory for all the output:
42
…
cd qiime_tutorial_data
pwd
#This should show we are in qiime_tutorial_data
mkdir out
#This makes a directory for the results to go in
split_libraries.py -m Fasting_Map.txt -f Fasting_Example.fna -q Fasting_Example.qual -o split_library
This invocation will create three files in the new directory split_library/:
split_library_log.txt
This file contains the summary of splitting, including the number of reads detected for each
sample and a brief summary of any reads that were removed due to quality considerations.
histograms.txt
This tab delimited file shows the number of reads at regular size intervals before and after
splitting the library.
seqs.fna
This is a fasta formatted file where each sequence is renamed according to the sample it
came from. The header line also contains the name of the read in the input fasta file and
information on any barcode errors that were corrected.
Processing sequences into OTUs
There are several steps to go through to produce the annotated OTUs from the input sequences,
however the following 5 steps can be called using the ‘pick_de_novo_otus’ command found at the
end of this section.
1. Pick OTUs
Using the seqs.fna file generated from split_libraries.py, the sequences are clustered into
Operational Taxonomic Units (OTUs) based on their sequence similarity. This basic command uses
the default parameters: uclust matching, 0.97 sequence similarity, no reverse strand matching.
pick_otus.py -i split_library/seqs.fna -o out/uclust_picked_otus
2. Pick representative
Since each OTU may be made up of many sequences, we will pick a representative sequence for
that OTU for downstream analysis. This representative sequence will be used for taxonomic
identification of the OTU and phylogenetic alignment. (options: random, longest, most_abundant,
first)
mkdir out/rep_set
#This makes a subdirectory to store the representative set
pick_rep_set.py -i out/uclust_picked_otus/seqs_otus.txt -f split_library/seqs.fna
-o out/rep_set/seqs_rep_set.fasta –rep_set_picking_method most_abundant
3. Assign taxonomy
You can compare your OTUs against a reference database of your choosing. For our example, we
will use the default RDP classification system assignment method which comes ready with QIIME,
however BLAST is also an option.
assign_taxonomy.py -i out/rep_set/seqs_rep_set.fasta -o out/rdp_assigned_taxonomy
43
…
4. Make OTU table
Tabulates the number of times an OTU is found in each sample, and adds the taxonomic predictions
for each OTU in the last column if a taxonomy file is supplied.
make_otu_table.py -i out/uclust_picked_otus/seqs_otus.txt
-t out/rdp_assigned_taxonomy/seqs_rep_set_tax_assignments.txt -o out/otu_table.biom
5. Align sequences
Alignments can either be generated de novo using programs such as MUSCLE, or through
assignment to an existing alignment with tools like PyNAST. For small studies such as this tutorial,
either method is possible. However, for studies involving many sequences (roughly, more than
1000), the de novo aligners are very slow and assignment with PyNAST is preferred.
align_seqs.py -i out/rep_set/seqs_rep_set.fasta -o out/pynast_aligned_seqs
–alignment_method pynast -t data/core_set_aligned.imputed.fasta
6. Filter alignment command
Before building the tree, the alignment must be filtered to remove columns comprised only of gaps.
filter_alignment.py -i out/pynast_aligned_seqs/seqs_rep_set_aligned.fasta
-o out/pynast_aligned_seqs –lane_mask_fp data/lanemask_in_1s_and_0s
7. Build phylogenetic tree command
Produces a newick formatted tree file (.tre) which can be viewed using most tree visualization tools.
Method options: clearcut, clustalw, raxml, fasttree_v1, fasttree(default), muscle
make_phylogeny.py -i out/pynast_aligned_seqs/seqs_rep_set_aligned_pfiltered.fasta -o out/rep_set.tre
The above commands are integral to QIIME and further downstream analysis. Once their function
and process is understood, the parameters can be set in the custom_parameters.txt file and run
sequentially using the workflow script:
pick_de_novo_otus.py -i split_library/seqs.fna -p custom_parameters.txt -o out
# Make sure you change the path in the custom_parameters.txt file before running this command
Data to information
QIIME has many different ways to visualize and interrogate the data. Here we will explore just a
few.
Note: To open a HTML file type:
firefox filename
44
…
…
…
Heatmap
The QIIME pipeline includes a very useful utility to generate images of the OTU table. You can
open this file with any web browser, and will be prompted to enter a value for “Filter by Counts per
OTU”. Only OTUs with total counts at or above this threshold will be displayed. The OTU heatmap
displays raw OTU counts per sample, where the counts are coloured based on the contribution of
each OTU to the total OTU count present in that sample.
make_otu_heatmap_html.py -i out/otu_table.biom -o out/otu_heatmap
Taxonomy Summary Charts
The taxa of the samples can be visualised at each taxonomic level (see the' –L flag).
Here, summarize_taxa.py produces a text file at the Phylum level (Level 2=Domain, 3=Phylum,
4=Class, 5=Order, 6=Family, 7=Genus) and plot_taxa_summary.py produces the html output.
summarize_taxa.py -i out/otu_table.biom -o out/taxa_summary -L 3
plot_taxa_summary.py -i out/taxa_summary/otu_table_L3.txt -l Phylum -o out/taxa_charts -k white
Diversity
Community ecologists typically describe the microbial diversity within their study. This diversity
can be assessed within a sample (alpha diversity) or between a collection of samples (beta
diversity).
Alpha
Alpha diversity will be calculated and displayed though using this workflow. The full list of metrics
available can be found athttp://qiime.sourceforge.net/scripts/alpha_diversity_metrics.html. The
html visualisation file can be found at ‘out/arare/alpha_rarefaction_plots/rarefaction_plots.html’
alpha_rarefaction.py -i out/otu_table.biom -m Fasting_Map.txt -o out/arare -p custom_parameters.txt -t out/rep_set.tre
Beta
Beta diversity can be represented in many different ways, shown below. By rarefying the samples to
the smallest set (in this example dataset, 146 sequences) sample heterogeneity can be removed.
Firstly, 3d plots are generated using unifrac.
beta_diversity_through_plots.py -i out/otu_table.biom -o out/bdiv_even146 -p custom_parameters.txt
-m Fasting_Map.txt -t out/rep_set.tre -e 146
To view a 3d plot, navigate to the jar directory within the metric you wish to view
(weighted/unweighted, continuous/discrete) and enter ‘java -jar jar/king.jar */*.kin’ where you can
then view the output. The more traditional 2d plots are also generated by unifrac:
45
…
make_2d_plots.py -i out/bdiv_even146/unweighted_unifrac_pc.txt -o out/bdiv_even146/unweighted_unifrac_2d
-m Fasting_Map.txt -k white -p out/bdiv_even146/prefs.txt
These are easiest viewed through the html page:
‘out/bdiv_even146/unweighted_unifrac_2d/unweighted_unifrac_pc_2D_PCoA_plots.html’
Inter-Sample Distance
Distance Histograms are a way to compare different categories and see which tend to have
larger/smaller distances than others.
make_distance_histograms.py -d out/bdiv_even146/unweighted_unifrac_dm.txt
-m Fasting_Map.txt -o out/bdiv_even146/distance_histograms -p out/bdiv_even146/prefs.txt
The html is found at:
‘out/bdiv_even146/distance_histograms/unweighted_unifrac_dm_distance_histograms.html’
Jackknifing & UPGMA
To measure robustness of the sequencing effort, we perform a jackknifing analysis, wherein a small
number of sequences are chosen at random from each sample, and the resulting UPGMA tree from
this subset of data is compared with the tree representing the entire available data set. This produces
jackknifed weighted and unweighted 2d and 3d plots like above, and also jackknifed trees found in
the out/jack/ directory.
jackknifed_beta_diversity.py -i out/otu_table.biom -o out/jack -p custom_parameters.txt
-e 110 -t out/rep_set.tre -m Fasting_Map.txt
make_bootstrapped_tree.py -m out/jack/unweighted_unifrac/upgma_cmp/master_tree.tre -s
out/jack/unweighted_unifrac/upgma_cmp/jackknife_support.txt -o
out/jack/unweighted_unifrac/upgma_cmp/jackknife_named_nodes.pdf
evince out/jack/unweighted_unifrac/upgma_cmp/jackknife_named_nodes.pdf
A key feature of the QIIME interface is the ability to list the steps which you wish to run and have
them sequentially performed by running them as a standard shell script. In the file
qiime_tutorial_commands_serial.sh in your working qiime directory, you will find the commands
which we have just gone through. This can be called directly from the QIIME shell prompt and will
produce the same output as we have achieved, with no user input. This can be edited, along with
custom_parameters.txt to tune the analyses to your specific requirements.
What is described above is a brief introduction to the type of analyses which QIIME can perform.
Extensive details of the commands, parameters and metrics used can be found at
http://www.qiime.org/scripts or through typing a QIIME command followed by ‘-help’ into the
qiime shell prompt.
46
…
…
…
…
…
Analysing sequences with MOTHUR
MOTHUR is another popular pipeline for performing microbial community analysis that integrates
many third party tools which have become standard in the field. MOTHUR is included in the
standard Bio-Linux distribution.
As an example, we will use the same data used in the previous QIIME tutorial. Please refer to the
previous QIIME tutorial for the description of the experiment and the data.
What follows is an adapted version of the exemplary tutorial provided by MOTHUR (which can be
found athttp://www.mothur.org/wiki/Sogin_data_analysis). Further details and parameters on the
below commands and many more can be found at this site. The material was compiled and adapted
by Soon Gweon, NBAF.
Introducing mothur: Open-source, platform-independent, community-supported software for
describing and comparing microbial communities. Schloss, P.D., et al., Appl Environ Microbiol,
2009. 75(23):7537-41
Preparation
First, we must copy the tutorial data to your home directory and extract it:
cd
tar -xvzf /usr/local/bioinf/documentation/bio-linux/intro_course/mothur_tutorial_data.tar.gz
cd mothur_tutorial_data
Entering the directory (cd mothur_tutorial_data) and listing the files (ls) will show what was
extracted:
Fasting_Example.fna
This is the 454-machine generated FASTA file.
Fasting_Example.qual
This is the 454-machine generated quality score file, which contains a score for each base in
each sequence included in the FASTA file.
Fasting_Example.oligos
This is generated by the user. This file is used to provide barcodes and primers to
MOTHUR.
data
This directory contains the reference files required for alignment of the OTUs.
To begin working with MOTHUR, you must enter the MOTHUR shell by typing ‘mothur’ in your
working directory. This has been successful if the prompt changes to end in ‘mothur >’. The
commands below will only be recognised within the special MOTHUR shell.
47
mothur
Assign Samples to Multiplex Reads and Quality Filtering
First, we need to separate each sequence according to the barcode and primer combination. The first
task is to assign the multiplex reads to samples based on their nucleotide barcode using the
information from oligos file. Also, this step screens sequences based on the quality file, truncating
reads at where the quality score falls below the threshold. The script for this step is trim.seqs:
trim.seqs(fasta=Fasting_Example.fna, oligos=Fasting_Example.oligos, qfile=Fasting_Example.qual, qaverage=25,
minlength=200, maxlength=1000)
This creates five files in the current directory:
Fasting_Example.trim.fasta
This is the processed fasta file.
Fasting_Example.trim.qual
This is the precessed quality file.
Fasting_Example.scrap.fasta
This file contains sequences which fell below the thresholds (below quality score of 25,
shorter
than 200 bps or longer than 1000 bps)
Fasting_Example.scrap.qual
This is the quality file for the scrapped sequences.
Fasting_Example.groups
This is a two-column list with the first column indicating the sequence names of those
sequences
in the Fasting_Example.trim.fasta file and the second column the group that it came
from.
Generating Alignment & Distance Matrix
The first thing we want to do is to simplify the dataset by working with only the unique sequences.
We are not chucking anything here, we are just making the life of your CPU and RAM a bit easier.
We do this with the command: unique.seqs
unique.seqs(fasta=Fasting_Example.trim.fasta)
We then need to generate an alignment of our data using the align.seqs command by aligning it to
SILVA-compatible alignment database reference alignment. Please note that this step can take
awhile to complete.
align.seqs(fasta=Fasting_Example.trim.unique.fasta, reference=data/silva.bacteria.fasta, flip=T)
Next, we need to filter our alignment so that all of our sequences only overlap in the same region
and remove any columns in the alignment that don’t contain data. We do this by running the
filter.seqs command.
48
filter.seqs(fasta=Fasting_Example.trim.unique.align)
Next, we want to calculate the column-formatted distance matrix, but we are only interested in
distances smaller than 0.15 at this stage. We will do this using dist.seqs command.
dist.seqs(fasta=Fasting_Example.trim.unique.filter.fasta, cutoff=0.15)
Classify Sequences
We then need to classify our sequences using the MOTHUR version of the “Bayesian” classifier.
We do this with classify.seqs command using the SILVA-compatible reference file and taxonomy
file(http://www.mothur.org/wiki/Silva_reference_alignment)
classify.seqs(fasta=Fasting_Example.trim.unique.filter.fasta, name=Fasting_Example.trim.names,
template=data/silva.bacteria.fasta, taxonomy=data/silva.bacteria.silva.tax)
Renaming Files
This step is done only to make our life easier by making copies of some files and giving it nice and
short names. The command system() allows you to run programs outside of MOTHUR without
leaving the MOTHUR shell.
system(cp Fasting_Example.trim.unique.filter.fasta final.fasta)
system(cp Fasting_Example.trim.names final.names)
system(cp Fasting_Example.groups final.groups)
system(cp Fasting_Example.trim.unique.filter.dist final.dist)
system(cp Fasting_Example.trim.unique.filter.silva.wang..taxonomy final.taxonomy)
Clustering Sequences
Now we want to assign these sequences to OTUs for every possible distance up to and including a
distance of 0.15. By default, this method uses the average neighbour algorithm.
cluster(column=final.dist, name=final.names, cutoff=0.15)
Generating OTU Table and Normalisation
Now that we have a list file, we need to create a table that indicates the number of times an OTU
shows up in each sample. This is called a shared file and can be created using the make.shared
command. We are only interested in the distance of 0.03 from the list file, so we give 0.03 to “label”
parameter.
make.shared(list=final.an.list, group=final.groups, label=0.03)
We then normalise the number of sequences in each sample. In order to do this, we need to know
how many sequences are in each step. You can do this with the count.groups command.
49
count.groups()
From the output we see that the sample with the fewest sequences had 146 sequences in it, so we
normalise all the samples to this number of sequences.
sub.sample(shared=final.an.shared, size=146)
Classifying OTU
The last thing we’d like to do is to get the taxonomy information for each of our OTUs. To do this
we will use the classify.otu command to give us the majority consensus taxonomy.
classify.otu(list=final.an.list, name=final.names, taxonomy=final.taxonomy)
Converting the shared file to BIOM-format
The make.biom command allows you to convert your shared file to a biom file. Please refer to
http://biom-format.org/documentation/biom_format.html for detail.
make.biom(shared=final.an.shared, contaxonomy=final.an.unique.cons.taxonomy)
Data to information
MOTHUR has many different ways to visualise and interrogate the data. Here we explore just a few.
Heatmap
Now we’d like to compare the membership and structure of the various samples using an OTU-
based approach. Let’s start by generating a heatmap of the relative abundance of each OTU across
the 24 samples using the heatmap.bin command.
heatmap.bin(shared=final.an.shared)
The output will be in a SVG-formatted file called final.an.0.03.heatmap.bin.svg. In this heatmap,
the red colors indicate communities that are more similar than those with black colors.
Venn Diagram
MOTHUR allows you to generate a Venn diagram with 'venn command. Let’s take a look at the
Venn diagram for PC.354 and PC.355.
venn(shared=final.an.shared, groups=PC.354-PC.355)
This generates a file called final.an.0.03.sharedsobs.PC.354-PC.355.svg. To view the file, type the
following in another terminal:
eog final.an.0.03.sharedsobs.PC.354-PC.355.svg
When generating Venn diagrams we are limited by the number of samples that we can analyze
simultaneously. MOTHUR can generate up to 4-way Venn diagram:
50
venn(shared=final.an.shared, groups=PC.354-PC.355-PC.356-PC.481)
Finding and running useful scripts
Scripts are small programs written in a scripting language such as Perl or Python or even by compiling
commands you’d run directly in the shell into a shell script file. Unlike normal binary applications, the
program files can be examined and edited directly using a text editor. However, Linux is able to run these
text files as if they were compiled programs by automatically invoking the appropriate interpreter named on
the first line of the script – for example if the first line of a script says:
- !/usr/bin/perl
Then the script will be run using the Perl interpreter. Writing scripts is beyond the scope of this course, but it
is useful to be able to run scripts that others have written.
Exercise
http://nebc.nerc.ac.uk/tools/code-corner/scripts
•
Visit the above link, then find the “fastagrep” script located under [http://nebc.nerc.ac.uk/tools/code-corner/scripts/sequence-formatting-and-other-text-manipulation “Sequence Formatting and Other
Text Manipulation”]. (If you don’t have a net connection there is also a copy in bioinf_files)
•
Make a folder called “scripts” in your home directory and save the file there.
•
In a terminal run the command chmod a+x scripts/fastagrep to tell Linux that this file is an
executable script.
•
Type ~/scripts/fastagrep to actually run the script. In this case you will see basic help.
Fastagrep is a script to help extracting sequences of interest form a multi-FASTA file by matching text in the
header lines. It is a FASTA-aware version of the standard Linux ’grep’ command introduced in part 1. An
example invocation of fastagrep in the case where the FASTA file has Uniprot-style headers would be:
~/scripts/fastagrep -F ’OS=Zea mays’ uniprot_sprot.fasta
•
Here, the -F flag specifies an exact text match and the ’OS=…’ syntax is specific to
the headers used by Uniprot.
Tip:
•
If you get a “permission denied” error when running the script, it normally means that you missed
out the chmod a+x … part.
•
If you get a “bad interpreter” error it means that the interpreter named on the first line of the file
cannot be found on the system. You can always run the interpreter explicitly – eg. by typing perl
scripts/fastagrep.
A practical exercise using fastagrep is included in the next section.
Aligning sequences using MUSCLE
Aligning multiple sequences is a very common task, as it is the first step to comparing related sequences.
There are many algorithms for performing gapped global alignments over a set of sequences, most of which
can be used on either nucleotide or peptide input. Many web based tools offer to align sequences, for
examplehttp://uniprot.org can align sequences retrieved from a search on the reference database, and
additional sequences can also be uploaded and added to the alignment. GUI applications like ClustalX and
Jalview can call alignment applications like Clustal, MUSCLE, and MAFFT for you and display the results
graphically.
Sometimes you may want to run the alignment directly from the command line – reasons for this include:
51
•
You want to fine tune the options passed to the aligner
•
You want to use an aligner program that is not supported by the GUI or website you are using
•
You want to run the alignment remotely – for example on a powerful departmental server
•
You want to run several alignments at once using a loop or a short script
Exercise
Plants contain many closely related genes in the cellulose synthase family. Previous studies have examined
these in some model organisms, eg maize[ref below]. It might be useful to compare the cellulose synthase
genes in another plant of interest, or to align bacterial homologues against the plant genes.
For use in this exercise, the file all_cellulose_synthase.fasta in the example files directory
contains all the reference cellulose synthase genes from Uniprot (selected with the query
“name:cellulose synthase”).
1. Ensure that you have the fastagrep script available from the previous exercise.
2. Use fastagrep to extract all the sequences that come from oilseed rape (Brassica napus).
3. Modify your command so that instead of printing the matching sequences to the terminal
the results are saved as a file.
•
Hint – this involves using the > operator
4. Now invoke MUSCLE with the default parameters to perform the alignment. Use the
following command but replace the ??? with the appropriate filename:
muscle -in ??? -out seqs.aln
5. Run the Jalview application from the bioinformatics menu. Close the default project
windows that appear, and select “Input Alignment -> from File”. Now load seqs.aln,
enable colouring in the Colour menu and bring up the overview window from the view
menu.
Jalview has many options for viewing and editing the alignment, drawing trees, etc.
For comparing alignments, you may want to add the “-stable” flag to the muscle command in order to
maintain the sequences in the same order as the input FASTA file.
[ref for paper mentioned above]
Holland et al. 2000. A comparative analysis of the plant cellulose synthase (CesA) gene family.
http://www.ncbi.nlm.nih.gov/sites/entrez?db=pubmed&cmd=search&term=10938350
52
BLAST
The Basic Local Alignment Search Tool (BLAST) searches for regions of local similarity between
sequences. The program compares nucleotide or protein sequences or patterns to sequence, or sequence-
related, databases and calculates the statistical significance of matches.
The documentation here covers only the most commonly used BLAST implementation, BLAST+ from
NCBI. There are several other BLAST varients that essentially do the same thing. Some are commercial, for
example AB-BLAST from Advanced Biocomputing LLC, formerly known as WU-BLAST. There are also
many other programs that search sequence databases and perform local alignments. Before relying on
BLAST as your search tool you should consider whether one of these might better suit your analysis needs.
A few examples of ways to run BLAST, on Bio-Linux or otherwise
●
Locally installed command line against locally installed BLAST databases
●
Locally installed command line against remote databases
●
Locally through options in graphical programs (e.g. under the Run menu in Artemis)
●
Remotely through ssh tunnelling or the remote BLAST options in Artemis.
●
Remotely on websites such as those available at the NCBI and EBI
●
Remotely using webservices, either through programs such as Taverna, or through scripting
For this course, we assume that you are familiar with running BLAST searches using at least one web-based
interface. If you are not, then this is a good time to look at the facilities offered through one of these sites,
and to try BLASTing some of the example sequences in the coruse folder:
NCBI:
http://blast.ncbi.nlm.nih.gov/Blast.cgi
EBI:
http://www.ebi.ac.uk/Tools/sss/
Bio-Linux includes both the BLAST+ package and the older NCBI “blastall” implementation. Information
and links in the Bio-Linux Bionformatics Documentation System (icon on your Desktop) provide
information on both packages. The ncbi-blast+ package contains a number of programs allowing you to
carry out different types of searches, as well as to create databases, reformat reports, etc.
What this course covers
This course covers how to run BLAST+ programs via the command line and a few simple steps you can take
to work with more than one sequence at a time. We also cover how to install your own BLAST databases in
Appendix C. We do not cover the internals of BLAST searching in any detail or how to interpret BLAST
results.
Why use BLAST on the command line?
The web resources available for BLAST are highly developed, usually stable, and have access to a much
greater set of data than most people will have available locally. They also often provide lovely graphics and
links out to other data resources or analysis programs. So why use the command line at all?
For small volumes of data, where you wish to search a commonly available database or subset of data
available through a website, then web access is a very good option. Web-based utilities are also good for
experimenting with parameters when determining useful settings for your investigation. The command line
comes into its own for setting up searches quickly, for processing large volumes of data, for automating your
searches, and for giving you the ability to get just the information you want returned from the BLAST
53
searches. (This last point has been made easier than ever in the newer BLAST+ programs, where you can, to
a certain extent, specify which information to return in a tab delimited format1.)
General considerations for database searching
Database searching should be approached like an experiment. In particular: define your aims before your
start. This will save you an enormous amount of time, both in terms of time taken doing searches and time
taken bringing together and reporting your findings later.
Before you start searching with a sequence, it is useful to outline your answers to questions like:
●
What am I trying to find out/what do I want to do with the results?
●
What kind of database do I want to search with my sequence? E.g. nucleotide, protein, pattern, profile?
●
Which database(s) in particular do I want to search? Why?
●
Are there are any subsets of the database that I could or should restrict my search to?
●
Do I want to take into account potential frameshifts in my coding sequences?
●
What format is my sequence in?
●
Do I want to filter my sequence for repeats and low complexity regions before searching?
●
Is the scoring system I’ve chosen appropriate?
●
Where and how will I store a record of the parameters I’ve used and the database version I’ve searched
with?
A very, very brief introduction to BLAST+
'''BLAST+ includes programs to perform searches with different types of input against databases holding
different types of data. Each search combination is referred to by a particular name and has its own
command. A table of the basic BLAST “flavours” and what they do is given below.
Blastall flavour
Input sequence type
Database sequence type
blastn
nucleotide
nucleotide
blastp
peptide
peptide
blastx
nucleotide (6 frame conceptual
translation is created during run)
peptide
tblastn
peptide
nucleotide (6 frame conceptual
translation is created during run)
tblastx
nucleotide (6 frame conceptual
translation is created during run)
nucleotide (6 frame conceptual
translation is created during run)
1 You can return most information you want using the tab delimited output options in BLAST+. However, a key thing
missing is the Description field – usually the most interesting field for a biologist! To get this field, along with
others, out of a BLAST report, it is still necessary to consider custom scripting – or grabbing someone else’s script
that does the job!
54
We HIGHLY recommend you invest time learning about what BLAST does in detail, including how it works
and what the statistics is produces mean. The “take the top hit” method will rarely serve your research well.
We provide a list of references and helpful web pages in Appendix C that we hope will help you learn more
about blast programs.
There are many other programs available as part of the BLAST+ release apart from the ones above. These
include blastdbcmd, dustmasker, psiblast, rpsblast+, segmasker and srsearch.. These programs are not
covered here, but are worth learning about for your own work.
How a BLAST database looks on the file system
A typical BLAST database consists of three files names with extensions '.pin .phr and .psq for protein
databases or .nin .nhr and .nsq for nucleotide databases. These files represent a specially indexed version
of a multi-fasta source file. Do not try to examine the files in a regular text editor (they appear as garbage),
and do not try to split the files apart. When invoking BLAST commands, just give the path to the database
without any extension (see examples). BLAST will know to find and read the three files.
A simple blastp search
The following is a basic blastp command – you can run it from within the course folder.
blastp -db blastdb/sprot –query cd4_cerae.fasta –evalue 0.0001 > cd4_cerae.blastp
The command is easy to understand when you break it down. It means:
➔
run blastp, i.e. a peptide sequence will be used to search a peptide database.
➔
The database (-db) to be searched is called sprot and can be found in the blastdb directory.
➔
The input sequence (-query) is cd4_cerae.fasta.
➔
Only report results of sequences with e-values (-evalue) better than (i.e. lower than) 0.0001.
➔
Put the results of this search in the file cd4_cerae.blastp, using standard shell redirection
(>).
You can fine tune BLAST easily using additional command line options. We highly recommend that you
read about BLAST and determine appropriate settings for your research questions. This will ultimately save
you a huge amount of time and energy.
A copy of the Swissprot part of Uniprot, formatted for BLAST searches, is located in the directory blastdb,
under your bioinf_files directory. We do not fully cover the use of makeblastdb in this course, but some
more info is shown in Appendix C. For completeness, the steps we took, including the command we used to
create the BLAST formatted Swissprot database, are as follows:
We downloaded the fasta formatted swissprot file from
ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/uniprot/swissprot.gz
into the blastdb directory under bioinf_files.
We then used the makeblastdb command in a one-liner run within the blastdb/ directory.
gunzip -c swissprot.gz | makeblastdb -title Swissprot -out sprot -dbtype prot -in -
Note the use of a hyphen “-” in place of a filename tells the command to get the input via the pipe “|”. This
does not work in all cases but is a common convention in command line tools.
55
Reference databases for BLASTing would normally be stored in a shared location
You can either give the full or relative PATH to your blast databases within the blast command, or you can
store your blast databases in a location that is supplied as the value for the BLASTDB environmental
variable and just provide the database name in the blast command line.
When loading reference BLAST databases onto Bio-Linux 6 you can can put them in the default BLASTDB
location /home/db/blastdb OR change the environmental variable BLASTDB to a location appropriate for
your work. If you do not have sudo access you will need to talk to the system administrator of the machine
about this. Note that the default location for blast databases may be different on different machines, and may
change on Bio-Linux in the future.
For the purposes of this tutorial, we will give each BLAST command the explicit location of the BLAST
database to search.
Exercise
●
Move into the bioinf_files directory if you are not already there.
●
List the files in the blastdb subdirectory. The files called sprot.p* are the files that BLAST uses when
it searches.
●
From within the bioinf_files directory, run the example command given previously, ie:
blastp -db blastdb/sprot –query cd4_cerae.fasta –evalue 0.0001 > cd4_cerae.blastp
●
Look at the results file that has been created.
●
Try a blastx search on the file unknown.fasta. This time set the evalue to 1 and save the results in
unknown.blastx. The command you use will start like this:
blastx -db blastdb/sprot -query unknown.fasta …???…
Recall that a blastx search translates a nucleotide sequence in six frames and searches a peptide database.
●
Look at the results file.
●
blastp expects a peptide query file, and blastx expects nucleotides. What would you expect to happen
if you use an inappropriate BLAST flavour? Try it and see.
Formatting BLAST output
You have now seen the default report format for BLAST searches. There are many options available using
the -outfmt option with a numerical argument between 0 and 11. The default is -outfmt 0.
The BLAST+ commands don’t (currently) have man pages, but to see a list of all the -outfmt options you
can use the builtin help function:
blastx -help | less
Exercise
●
Run either of the above BLAST searches again, this time adding the parameter -outfmt 6 to the
command. Make sure you change the name of the output file as well, or else just let the results get printed
to the screen.
●
Look at the results from this search and compare it to what was returned using default formatting. Is it
easier or harder to read? Is there information present in one report that is not in the other?
Note:''' BLAST+ programs offer finer control over the format and contents of results returned – see the help
page as mentioned above.
56
Handling multiple sequences
BLAST makes it easy to deal with a medium-sized number of sequences at once – say up to a few hundred.
For thousands of sequences, you will probably want to use the ideas introduced here, in conjunction with
running your searches on a compute cluster and using scripts to pull out information of relevance from the
result files.
The general principle of needing more sophisticated techniques as the data volume increases applies to pretty
much any bioinformatics task.
First we’ll look at BLASTing a file containing more than one sequence
In the next section we’ll process multiple sequences as input using a “foreach” loop
BLAST searching using fasta files containing more than one sequence
Exercise
●
Look at the contents of the file multiseqs.fasta in your bioinf_files directory. How many sequences
are in this file?
●
Run a blastx search using multiseqs.fasta as the input file.
blastx -db blastdb/sprot -query multiseqs.fasta -evalue 0.4 > multiseqs_1.blastx
●
Look at the results file to see how the results have been reported. How easy would this be to read and
understand? Could you load the results into other software tools?
●
Try the above query again, but with the -outfmt 6 flag.
●
Read about the -num_descriptions, -num_alignments and -max_target_seqs flags in the BLAST+
documentation. For very small studies, where you might read through the BLAST reports yourself rather
than doing further processing on them using the computer, these flags may help you otherwise.
Processing multiple files using a foreach loop
This section introduces a powerful shell feature that allows you to quickly automate repetitive tasks. In this
case we’ll use BLAST to illustrate the use of the loop, so you’ll need to look at the previous exercise before
attempting this one.
A foreach loops say to the computer:
“For each thing in this list, do the following:”
So, when running multiple BLAST searches, you might want to do something like:
“For each sequence in my list, run a blastx search against my Swissprot database.”
You can also create nested foreach loops. For example, if you had a list of sequences and a list of databases,
you could use a nested foreach loop to get the computer to do something like this:
“For each sequence in my sequence list, run a blastx search against each database in my database list”
You can run a foreach loop on arbitrarily long lists. However, for the exercises below, we will use just five
sequences:
testseq1.fasta, testseq2.fasta, testseq3.fasta, testseq4.fasta and testseq5.fasta.
57
The foreach loop explained step by step
You need to tell the computer the list of files to work on. Here, we will use a glob pattern match to indicate
the list of sequences we want to work with. Recall that echo simply prints its arguments and so can be used
to show glob expansions:
echo testseq*.fasta
or, if we wanted to be more specific:
echo testseq[1-5].fasta
We bind each file in the list to a loop variable within the first line of the foreach loop. So the following says:
“take each file in this list in turn and refer to it as j”:
foreach j in testseq[1-5].fasta
When we finish, our complete foreach loop will state:
foreach j in testseq[1-5].fasta ; do
blastx –db blastdb/sprot -query $j -evalue 0.01 -out $j.blastx
done
This means: for each sequence in the list in the first line, run the command in the second line. When all the
sequences in the list have been dealt with, then finish.
Loops are very powerful and useful, so it is worth understanding exactly how they work. A more detailed
explanation follows.
Explanation of the first line of a foreach loop:
●
we have used the command “foreach”. It’s not the only way to write a loop but it is the most used.
●
the “j” is a name we choose to refer to “each thing” – more specifically, for each thing we get to in the
list, let’s refer to it by the name j. This is an arbitrary name. You can use whatever you want. So the
following are equally correct to the line given above:
foreach myThing in testseq[1-5].fasta
calls each list item in turn “myThing”
foreach x in testseq[1-5].fasta
calls each list item in turn “x”
foreach seq in testseq[1-5].fasta
calls each list item in turn “seq”
Once you have chosen a name for each thing in your list, you must use that name with a dollar symbol “$” to
refer to the list item in any commands that follow within the foreach loop. Recall how the $ construct also
lets you access the contents of environment variables, like $BLASTDB.
58
Please note that the syntax used this section assumes that you are in the default Zshell. If the
commands fails for you and you are sure that you have typed them in correctly, please check your shell.
You can identify your current shell by typing the command
echo $0. If you are not in the zshell (zsh)
already, just type
zsh in your terminal window.
Other shells provide the same functionality as the foreach loop demonstrated here, but the syntax is different.
●
The keyword in is followed by a list of things to loop over. In this case the list is being generated as the
result of a single glob pattern expansion, but this need not be the case. You can list items explicitly, use
multiple patterns, or even generate a list on-the-fly using backtick substitution (not covered in this tutorial).
●
The semicolon serves to terminate the list of items to be processed, and do primes the shell to accept
one or more commands to be run within the loop. The single command done terminates this list.
●
So the overall effect of that one line is: “foreach thing that matches the pattern testseq[1-5].fasta, do
the following:”, and after that you just supply a regular command to run. Note how we can reference $j as
the input sequence and also use $j.blastx to generate a filename for the results – ie. the original name
with .blastx appended.
Hint: It is usually a good idea to check that the command or pattern used to create a list does actually
generate the list you expect before including it within a foreach loop. Once common trick is to add echo
on the start of the command within the loop, so the commands are printed to the screen but not run.
Exercise
Set up a foreach loop to run blastx searches using the five testseq*.fasta sequences with the Swissprot
database:
●
Type this command to begin the foreach loop as described above:
foreach j in testseq[1-5].fasta ; do
●
You will now be seeing something like:
live@machine[bioinf_files] foreach j in testseq[1-5].fasta ; do
foreach>
●
The foreach> is a prompt, much like the regular prompt – it is here we tell the computer what we
want it to do with each item in the list. To do this, type:
blastx –db blastdb/sprot -query $j -evalue 0.01 -out $j.blastx
Recall that we defined each thing that we want to work on by the letter j in the first line of the
foreach loop. In each subsequent line of the foreach loop, we refer to each thing by prefacing the j
with a $ sign.
Each $j in that command will be replaced by the name of a file from the list.
So here, the blastall command is executed with each filename in turn, and output files are named
using the sequence filename with .blastx appended.
●
You will now see another foreach> prompt, inviting a second command, but you are done so type
done
This indicates that there are no more processing steps to include in this foreach loop.
●
After running the foreach loop successfully, type the command
ls -l *blastx
59
You should now see that you have five blastx results files. Imagine you had 100 sequences to blast – you
could set up a foreach loop and go get a coffee. (Of course, you still need to figure out how you’re going to
use or analyse the results files if you’re working with large numbers of sequences.)
We mentioned above that the j in the foreach loop was an arbitrary name. As an example, if we had used seq
instead of j, the foreach loop would have been written:
foreach seq in testseq[1-5].fasta ; do
blastx –db blastdb/sprot -query $seq -evalue 0.01 -out $seq.blastx
done
Notice that we have just replaced each instance of $j with $seq. Be careful, as the shell will not notice if
your names do not match up, but will just substitute blank spaces into the command.
Exercise
●
Look through all the files called testseq*.blastx by using the command less:
less testseq*.blastx
●
To go to the next document, you need to type the two-character command :n
●
To quit, press q
Why go to all this trouble when we could just create a multiple fasta file and run a BLAST search in one go?
Well, there is often more than one way to do a task, but foreach loops can be used with any programs – not
just BLAST – and not all programs will take multiple inputs, so this method is widely applicable.
Multiple tasks, and even inner loops can be carried out in a single foreach loop, as the following
example shows.
60
Exercise – advanced looping
If you have time, you can run the following foreach loop. Try to figure out what it does before running it.
You may need to read the man pages for basename and cut to understand all the steps being taken. Note,
the text has been indented for clarity but you need not type it like this. Also note the special quotes in the
second line are backticks obtained with the key at the top left of the keyboard, next to number 1. These
serve to capture the output of the basename command into the newname variable, and later to drive an
inner loop from a list contained in a file. (Earlier, we said these wouldn’t be
covered in the course, but here’s a little taster. Backticks are a powerful feature
for any aspiring command-line guru to master!)
foreach seq in testseq[1-3].fasta ; do
newname=`basename $seq .fasta`
mkdir $newname
pushd $newname
blastx -db ../blastdb/sprot -query ../$seq -evalue 0.01 -outfmt 6 -out $newname.blastx
cat $newname.blastx | cut -f2 > top5.list
for hit in `cat top5.list` ; do
wget -q [http://www.uniprot.org/uniprot/$hit.txt “http://www.uniprot.org/uniprot/$hit.txt”
] done
popd
done
You can get the Z-shell to report what it is doing within loops and functions by running the command set
-x. To return to normal output type set +x.
Working with lots of BLAST results
Reading a few BLAST reports is fine, but when you have thousands, you presumably won’t be reading them
one by one yourself.
A common way to handle large volumes of BLAST results is to get the computer to process the report files,
pulling out key information. You can try using the various -outfmt options, which give you a great deal of
fine tuned control over what to report in tab delimited format. Alternatively, you can use a customised script.
You might choose to load such extracted information into a database, or for small scale studies, into a
spreadsheet. This topic is not covered further in this course, but we recommend BioPerl modules for parsing
BLAST report files. Example BioPerl scripts for BLAST parsing can be found on your Bio-Linux machine
under the following directory:
/usr/share/doc/bioperl/examples/searchio
61
EMBOSS Programs
EMBOSS is an extensive package of programs that cover areas of bioinformatics analysis including:
●
Sequence alignment
●
Rapid database searching with sequence patterns
●
Protein motif identification, including domain analysis
●
Nucleotide sequence pattern analysis—for example to identify CpG islands or repeats
●
Codon usage analysis for small genomes
●
Rapid identification of sequence patterns in large scale sequence sets
●
Presentation tools for publication
We recommend that you refer to the official EMBOSS overview at
http://emboss.sourceforge.net/what/#Overview to find out more about the extensive functionality available
via EMBOSS programs.
EMBOSS also consists of an underlying programming library, in case you are interested in building your
own EMBOSS tools.
Ways to run EMBOSS programs:
●
Locally installed, via the jemboss graphical interface on your Bio-Linux machine*
●
Locall installed via graphical interfaces available under the Applications | Bioinformatics | Emboss
menu
●
Locally installed, via the command line on your Bio-Linux machine*
●
Remotely on websites such as Mobyl:http://mobyle.pasteur.fr
●
Remotely using webservices
Biological databases and EMBOSS on Bio-Linux
Certain EMBOSS programs can talk to local or remote biological databases. The version of EMBOSS
installed on Bio-Linux machines is pre-configured to access data from embl, emblcds, uniprot (including
swissprot and trembl) and Refseq from the EBI. Information about how to change this configuration can be
found at
http://nebc.nerc.ac.uk/tools/bioinformatics-docs/other-bioinf/emboss-applications-and-databases
Sequence formats and EMBOSS
EMBOSS programs accept most common sequence formats. EMBOSS also includes a versatile tool called
seqret that can be used to convert between sequence formats should you need to do this for other
bioinformatics programs.
62
A comparison of the Jemboss and command line interfaces for EMBOSS programs
Interface
Pros
Cons
Jemboss
Graphical
Interface
Easy to see the programs available and what
type of analysis they do
Easy to run
Many programs accept input files with
multiple sequences, either directly or using
lists of sequence or filenames.
Documentation is easy to access
Much slower to set programs running than
on the command line
Not always obvious how to save and where
to save output
Additional programs with EMBOSS
interfaces are not available via this
interface. e.g. there are emboss interfaces
for phylip and hmmer programs, among
others, which are useful when creating
pipelines and automating tasks.
Programs that are interfaces to others (e.g.
emma is an EMBOSS interface to clustalw)
may not always work smoothly via
Jemboss, even though they are fine via the
command line.
Command
Line
Prompted command line makes programs
easy to run
Programs accept input files with multiple
sequences either directly or using lists of
sequence or filenames.
Easy to automate tasks and create pipelines
of tasks
Documentation still easy to access
Prompted command line makes it easy to
overlook many of the options available
You have to read the documentation to find
out about the options available
Working with EMBOSS programs
We will run a simple 3 stage task twice – once using Jemboss and once using the command line so that you
can experience ,and get a feeling for the differences between, the two interfaces. The task is to fetch a
sequence file from the EMBL database, extract all the mRNA sequences from the feature table and search for
palindromes in those mRNA sequences.
63
Exercise – using Jemboss
●
Start Jemboss on Bio-Linux by typing jemboss on the command line. It can also be started by clicking
on the icon under the Applications | Bioinformatics menu.
●
Click on each of the categories (e.g. Alignment, Display, etc) to see what programs are listed.
●
When you’re finished exploring, click on the Data Retrieval category and choose coderet which is
under Sequence Data.
●
Scroll to the bottom of the window and click on the
button to bring up a documentation window.
Read about what coderet does.
Figure 1: The Jemboss graphical interface to EMBOSS programs
Figure 2: The GO button is pressed when you are ready to run the program. The i button pops up a
window with documentation. Some, but not all programs, will also have an Advanced Options button that
will bring up, often very useful, optional fields.
64
Exercise continued
●
Scroll back to the top of the coderet form in the Jemboss window, and fill in a Sequence Filename. In
fact, we want to pull a sequence directly from embl at the EBI. The sequence we want is from a plasmid
and has the accession number U80928. To fetch it from the EBI, you need to type:
embl:U80928
into the Sequence Filename box.
●
Enter a filename into the outfile file name box. For example, to distinguish from your later
work, you could use the name: jemboss_bx.coderet.
●
Scroll to the bottom of the window and hit the GO button.
●
When the program has finished, a new window called Saved Results should appear. (Don’t be
fooled – your results haven’t been saved yet!) There should be a number of tabs in that window.
One will be called the name you entered into the the outfile file name box (e.g.
jemboss_bx.coderet) The others will likely be called things like u80928.cds, u80928.noncoding,
etc.
●
Take a look at the type of information in each tab. In particular, take note that:
➢
each of the tabs that contains sequence information contains multiple sequences
➢
the command line you would use to run this program identically to how you just ran it via
Jemboss is provided to you under the cmd tab. This will be useful later.
●
To work with any of this data further, you have to save it to a local file. Click on the tab with
the name ending in .cds. Choose the File | Save to Local File… option and save this to a location
you can find again (e.g. under your bioinf_files directory). Give it a name that will distinguish it
from later work -e.g. jemboss_bx.cds. Do not close the Saved Results window as we want to
refer to the information under the cmd tab later.
●
Go back to the main Jemboss window, go to the Nucleic | Repeats section and choose
palindrome from the list of programs.
●
Browse for the file you just saved using the Browse files… button next to the box under
Sequence Filename near the top of the page. Note that you’ll have to set the Files of Type: option
to All Files to find your saved file because it has a .cds suffix.
●
Check that you’re happy with all the required options, and give a filename in the outfile file
name box. For example, jemboss_palin.txt. Then press the GO button.
●
Scan through the results to see what has been returned to you.
You can also view listings of the files on your system using the Jemboss file manager functionality. Click on
the symbol at the bottom right side of the Jemboss window. If you double click on the name of a file that
contains text, it will pop up in another window for you to view or edit. Note: the file listings in the Jemboss
window are not updated unless you refresh them manually - the regular file browser or the ls command are a
better way to keep track of what files have been created or deleted.
Using the EMBOSS command line
All EMBOSS commands follow a similar pattern:
●
If you just type the command name, then you are prompted for required information.
65
●
If you type the command name followed by -opt then you are prompted for optional
information as well as required information.
●
If you type the command name, followed by a minimum amount of information, and -auto, the
program runs and uses defaults for anything you have not specified in the command.
●
The full command (i.e. the command and all relevant options and values) can be specified by
including parameters and arguments on the command line.
●
The command name followed by -h or -help brings up information about the main options for
the program.
●
The command name followed by -h -v brings up information about all options for the program
●
Typing tfm followed by the command name brings up the full documentation for the program.
So, using the EMBOSS program seqret as an example, we could run:
seqret
Run seqret and prompt for required information.
seqret -opt
Run seqret and prompt for required and optional information.
seqret -sequence embl:X03487
Run seqret, specifying the sequence. Prompts for additional
information.
seqret -sequence embl:XO3487 -auto
Run seqret, specifying the sequence. Defaults are used for all other
options.
seqret -help
Show information about the main options for seqret
seqret -h -v
Show information about all options for seqret
tfm seqret
Show full documentation for seqret
Much more information about the EMBOSS command line syntax is available at:
http://emboss.sourceforge.net/developers/acd/commandline.html
Exercise – using EMBOSS command line
●
Look at the cmd tab in your jemboss results window for coderet. You should see the following:
coderet -seqall embl:U80928 -outfile jemboss_bx.coderet -auto
This command runs coderet, specifies the sequence to use and sets the output file name. The -auto option
indicates that you do not want to be prompted for further information. This results in default values being
used for all options you have not specified on the command line.
●
Read about coderet by bringing up the information via the command line:
coderet -h or coderet -help
brings up a list of main options
coderet -h -v
brings up a list of all available options
tfm coderet
brings up the full documentation
66
(EMBOSS commands exercise continued)
●
To make things simple, we will edit the command line in the coderet cmd tab of the Saved Results
window in Jemboss, and then copy and paste our final command line into a terminal to run the program.
Go to the coderet cmd tab of the Saved Results window in Jemboss, and edit the command to give a
new output filename. e.g.
coderet -seqall embl:U80928 -outfile cl_bx.coderet -auto
●
Open a new terminal window and cd to your bioinf_files directory. Make a new directory to store your
result files (as it will make it easier to see what files the program generates by default).
mkdir cl_dir
●
Change directory into your new directory, copy and paste the coderet command line above into the
terminal and press the return key. (Recall that we covered highlighting and pasting text using mouse
buttons near the end of the first half of this tutorial.) ie:
cd cl_dir
coderet -seqall embl:U80928 -outfile cl_bx.coderet -auto
●
When the program finishes, list the files in your directory. What has coderet produced? How does this
compare with the tabs presented to you when you ran coderet via Jemboss?
You may notice that we have generated a lot of files we don’t need. We could have specified to coderet that
we only wanted the mRNA sections from the embl entry BX255937. To find out how, you’ll need to refer
to the coderet documentation (the lists of options won’t tell you enough).
●
Now run palindrome on the mRNA sequence. To do this, you could edit, copy and paste the the
command in the Jemboss Saved Results window for palindrome, or you can type palindrome on the
command line and answer the prompts. Please run palindrome now, doing one of these.
Once you get to know it, the command line is much faster to get running than programs via Jemboss.
However, the power of using the EMBOSS command line is much greater if you need to process groups of
files, or do things repetitively.
Below we’ll go through an example of running an emboss program on a batch of files using a single
command.
If you want to run a job like this repetitively, you can save the commands in a text file and then set things up
to get those command executed whenever you want (either by you directly, or by your
computer at a time
you schedule). We do not cover this in these course notes, but please ask the demonstrator if you would like
to know more about this.
67
Exercise
Fetching a list of sequences using seqret.
●
Look at the contents of the file hexaseqs.list in your bioinf_files directory. e.g. using the
command less. You will see a list of sequence ids and the database those sequences are in.
●
Quit less. (hit q)
●
We need to tell EMBOSS programs when they are going to work on a list of files rather than
just a single file. To do this, we preface the filename with the @ symbol. So, to fetch the list of
sequences in the hexaseqs.list file, we can use the command:
seqret -sequence @hexaseqs.list
The default behaviour of seqret is to fetch sequences in fasta format, with all sequences in a
single file with a filename that uses the id of the first sequence. By now you should know
how to go about finding out how to alter aspects of the program behaviour like these.
●
Take a look at the sequence file you have generated.
You can use this same “list of sequences” syntax with Jemboss. e.g. you could run seqret via
Jemboss and specify the sequence name as @hexaseqs.list.
68
General things to keep in mind
If you suspect there may be a more
efficient way to do what you are doing, there probably is!
If you find yourself doing anything
repetitively, there is probably an easier way to do it.
Please
read documentation and seek advice. It will save you a lot of time in the end!
A very basic sequence assembly
This demonstration takes you through a very simple assembly of some reads from a mitochondrial genome.
This is in no way supposed to be a tutorial on genome assembly, but rather a way to see various tools in
action on a small dataset.
This section of the course was originally written as a separate tutorial by Dan Pass. Note that, in all the
commands given in this tutorial, $ represents your terminal prompt. This is a common convention, even
though the real prompt will be something like “live@biolinux[live]”. Lines beginning with # are comments
and not to be typed.
Setup
•
Open up the Bio-Linux Documentation icon in the Dash menu, then the Introductory Tutorial
folder. You should see several tar files. Select assembly_taster.tar.xz and right click it. Select
Extract To… from the pop-up menu. Extract to your home directory, which on the Live USB system
is listed as live in the list on the left.
•
Open a terminal, then change into the new directory and list the files:
$ cd assembly_taster
- -lh options to ls show human-readable file size
$ ls -lh
•
To get a quick look at the input data, you can view it in the less text file viewer:
$ less mt_reads.fastq
- as usual, press q to return to the terminal.
•
Make a new directory to store your results:
$ mkdir results
Quality Checking
Firstly, in receiving a set of sequence data it is paramount to assess the quality of the dataset. A useful tool is
FastQC which gives a quick graphical overview of the dataset.
•
Run FastQC on the dataset
$ fastqc -o results mt_reads.fastq
•
Open the HTML report file.
- The ampersand (&) will put the process in the background so you can still use the terminal
$ firefox results/mt_reads_fastqc/fastqc_report.html &
Split Barcodes
The sequencing data may be barcoded, depending on the experimental set up. Here, two mitochondria have
been sequenced together, with differing 10bp barcodes at the 5’ end. This allows us to split the data into two
sets whilst only performing one sequencing run. Here we use a standard script from the fastx toolkit
(http://hannonlab.cshl.edu/fastx_toolkit/index.html)
69
•
Use fastx splitter splits mt_reads.fastq by barcode.
- –bol indicates that the barcodes are at the 5’ end.
- Note the following command should be typed on a single line:
$ fastx_barcode_splitter.pl <mt_reads.fastq –bcfile mt_barcodes.txt
–bol –suffix .fastq –prefix results/
There are now two .fastq files in the results directory; one for each barcode. There is also an unmatched.fasta
file which should be empty. We will be focusing on the first mitochondrion, ie. the one now in
results/mt1.fastq.
Clean Up
To remove artefacts and improve the assembly we will do two steps:
1) Trim barcodes
This removes the barcode sequences from the beginning of each read. The -Q33 is required due to
differences in sanger and illumina encoding.
$ cd results
$ fastx_trimmer -i mt1.fastq -f 8 -o trimmed_mt1.fastq -Q33
2) Quality Filter
Removing
low quality sequences increases the accuracy of the assembly.
Here
we remove any sequences which do not have >25 phred quality score (-q) at 80% of bases (-p). (n.b.
https://en.wikipedia.org/wiki/Phred_quality_score).
•
Run the quality filter
- -v instructs the script to give ‘verbose’ output and it is common to find in similar scripts.
$ fastq_quality_filter -i trimmed_mt1.fastq -q 25 -p 80
-o qual_trim_mt1.fastq -Q33 -v
Note that you could have run both the previous commands in one shot, combined as a pipeline.
$ fastx_trimmer -i mt2.fastq -f 8 -Q33 |
fastq_quality_filter -q 25 -p 80 -Q33 -o qual_trim_mt2.fastq
70
Assembly With Velvet
Velvet (https://www.ebi.ac.uk/~zerbino/velvet/) is a highly popular short-read assembler which is available
on Bio-Linux. There are countless parameters and combinations to achieve the best assembly, but we will
run close to default here. We will assess the quality of the assemblies in the next step.
•
Run velvet in single-end mode with k=21
‘
k’ signifies the Kmer length i.e. the length of sub sequences that the data is being broken up into, and is
one of the most important parameters to manipulate. Full parameters can be seen by typing either
command with no flags.
- You should still be in the results directory at this point
- velveth is a ‘hash program’ which breaks down your data into Kmer sized sequences
$ velveth velvet_k21 21 -short -fastq qual_trim_mt1.fastq
- velvetg performs de Bruijn graph construction, error removal and repeat resolution
$ velvetg velvet_k21 -read_trkg yes -amos_file yes
•
Inspect the results in the Tablet graphical viewer (not ideal - we have 139 contigs):
$ tablet velvet_k21/velvet_asm.afg &
Quick ‘cheat’
VelvetOptimiser is a script which automatically tries multiple parameter combinations and returns the best
assembly it can find. It can be helpful in pointing you in the right direction.
•
Try using velvetoptimiser
$ velvetoptimiser -s 27 -e 31 -f ‘-short -fastq qual_trim_mt1.fastq’ -a 1
$ tablet auto_data_31/velvet_asm.afg &
Assembly With Abyss
Abyss (http://www.bcgsc.ca/platform/bioinfo/software/abyss) is another popular assembler which we will
run to give a comparison. Again, multitudes of parameters are available, but here we will run mostly with
default settings, just optimising the K-mer length.
A major benefit of working in a command-line environment is the ability to loop easily through multiple
values. Without an existing ‘optimiser’ type program, a shell loop can be used to try many values.
71
•
Run abyss in single-end mode with k=21
$ abyss -k21 qual_trim_mt1.fastq -o abyss_contigs.fa
•
Try abyss with multiple kmer values
- Type the first line and press return. The prompt will change to “for>”
$ for k in {15..20}
for> abyss -k$k qual_trim_mt1.fastq -o abyss_k$k.fa
- This will run abyss for all values of k between 15 and 20, and
- produce output for each permutation.
Assessing The Assemblies
We used tablet to view the output from Velvet assemblies. This isn’t possible with the Abyss output as the
program does not provide a full assembly, just the consensus contigs. We can obtain some simple statistics
on all the assembly results on the command line.
For example, the gnx-tools command will output basic statistics on the multi-fasta file produced by the
assembler.
•
Compare assemblies with gnx-tools
$ for f in velvet_k21/contigs.fa auto_data_31/contigs.fa abyss_contigs.fa
for> gnx-tools $f
Adding Some Annotation
If sequence assembly is a tricky process to master then sequence annotation is a bona fide black art. There
are various approaches that one can use and several pipelines available that will help. But in this case, we
just want to get something to look at in Artemis. We’ll quickly scan the assembled genome for likely open
reading frames. We’ll use the Abyss output as this has (hopefully!) produced a single contig.
Glimmer3 (http://ccb.jhu.edu/software/glimmer/index.shtml) is an application for predicting open reading
frames in prokaryotic genomes. As with the assemblers above, it should generally be tuned for the specific
organism that you are working with and also provided with an appropriate training data set. But in this case
we will just run it quickly with the default options (don’t do this if you want actual meaningful results).
A Perl script is provided to convert the output from Glimmer into something that Artemis can view. You
don’t need to be a Perl programmer to re-use useful scripts like this.
$ g3-from-scratch abyss_contigs.fa glimmer
$ perl ../glimmer_to_gbk.perl <glimmer.predict >glimmer.gbk
$ artemis abyss_contigs.fa &
You should now be looking at a view of the contig in Artemis. From the File menu select Read An Entry… and
choose the file glimmer.gbk.
To conclude this section, load the file human_mitochondrial.gbk into Artemis for comparison. This is not
exectly the same as the mitochondrial data you’ve just assembled (which is from Lumbricus rubellus) but it is
fully annotated. Annotation will have been achieved using a combination of automated tools and manual editing
in Artemis. You can find more on Artemis, and on how to identify genes using BLAST, in the next section.
72
Artemis
Artemis is a DNA sequence viewer and annotation tool, allowing visualisation of sequence features and the
results of analyses within the context of the sequence and its six-frame translation. Artemis can read embl or
genbank format files. Sequences can be loaded from local files or via the network from the EBI.
Ways to run Artemis:
●
from a locally installed version on your Bio-Linux machine*
●
via Java Web Start from the Sanger Centre
(http://www.sanger.ac.uk/resources/software/artemis/java/artemis.jnlp)
73
Figure 16: Artemis Entry window after hsy14768.embl is loaded.
Exercise
●
Start Artemis on Bio-Linux by typing '''artemis on the command line or by choosing the
option '''Artemis from under the Bioinformatics Applications graphical menu.
●
Now choose the option Open… from under the Artemis File menu, and select the
file hsy14768.embl from within the bioinf_files directory.
This should open up a large window, as shown in Figure 14, where this sequence is displayed
graphically .
●
Open a terminal window and view the text of the embl entry using the command
less hsy14768.embl
Notice how Artemis is providing a graphical representation of what is in the text file.
●
Try choosing Mark Open Reading Frames from under the Create menu of
Artemis.
●
Choose to mark open reading frames with a minimum size of 200.
You should now see two boxes near the top in the Entry section, the first called hsy14768.embl
and the other called ORFS_200+.
●
Uncheck the box next to hsy14768.embl. You should now be able to scroll along the
window horizontally and easily see the open reading frames you marked.
●
Check the box next to hsy14768.embl again. Look at the information in the bottom
frame of the window. Notice how it is related to the images in the frames above.
●
Try clicking on some of the lines in the bottom frame and seeing what happens in the
images in the other two frames.
●
Explore the options available to you. (Not all options will be functional by default. See the
information about the Run menu below)
●
Close the Artemis Entry Editing window using File | Close.
●
You can also load up files direct from the EBI. If you want to try this, then choose File |
Open from the EBI – Dbfetch… option in the original small Artemis window and enter the
accession number BX255937.
●
When you are done, close Artemis by choosing File | Close in the sequence entry
window and then choosing File | Quit in the main (small) Artemis window.
You can run various programs on your sequence, or parts of your sequence, from under the Run menu in
Artemis. Some of the options in this menu need to be configured to be appropriate for your site. There is
information on how to do this on our website at:
http://nebc.nerc.ac.uk/tools/bioinformatics-docs/faq#blast_art
If you are not the system administrator of your Bio-Linux machine, then you will probably need to liaise
with the person who is to get this set up properly.
74
We also highly recommend Artemis’ sister program Act, which can be used to graphically view a pairwise
BLAST betrween two or more sequences.
Appendix A – BLAST references and documentation
Web pages
The blastall and blast+ page in your Bio-Linux Bioinformatics Docs provides links to local web pages with
information about NCBI BLAST programs. You can also access this remotely at the URL:
[http://nebc.nox.ac.uk/bioinformatics/docs/blastall.html http://nebc.nerc.ac.uk/bioinformatics/docs/blastall.html
http://nebc.nerc.ac.uk/bioinformatics/docs/blast+.html]
NCBI BLAST Manual pages
[http://www.ncbi.nlm.nih.gov/books/NBK1763/ http://www.ncbi.nlm.nih.gov/books/NBK1763/
]http://www.ncbi.nlm.nih.gov/blast/blast_help.shtml
NCBI BLAST Web Interface paper
http://nar.oxfordjournals.org/cgi/content/full/36/suppl_2/W5
Sequence similarity statistics
http://www.ncbi.nlm.nih.gov/BLAST/tutorial/Altschul-1.html
NEBC BLAST Frequently asked questions
http://nebc.nerc.ac.uk/tools/bioinformatics-docs/other-bioinf/blastfaq
NEBC November 2007 Masters Bioinformatics Course (covers older blastall, rather than BLAST+)
[http://nebc.nerc.ac.uk/support/training/course-notes/past-notes/nebc-introduction-to-bioinformatics-msc.-biology-2007 http://nebc.nerc.ac.uk/support/training/course-notes/past-notes/nebc-introduction-to-bioinformatics-
msc.-biology-2007]
References
The book by Ian Korf is a good place to start in learning about what BLAST can do, how it does it and what BLAST output means. It
is now out of date however, and should be read in conjunction with the new blast+ documentation. Also note that wu-blast is now
AB-blast, which is licensed software from Advanced Biocomputing LLC.
S. F. Altschul, T. L. Madden, A. A. Schaffer, J. Zhang, Z. Zhang, W. Miller, and D. J. Lipman.
Gapped blast and psi-blast: a new generation of protein database search programs.
Nucleic Acids Res, 25(17):3389–402, 1997.
Lm05110/lm/nlm Journal Article Research Support, U.S. Gov’t, P.H.S. Review England.
S. F. Altschul, J. C. Wootton, E. M. Gertz, R. Agarwala, A. Morgulis, A. A. Schaffer, and Y. K. Yu.
Protein database searches using compositionally adjusted substitution matrices.
Febs J, 272(20):5101–9, 2005. Z01 lm000072-10/lm/nlm Journal Article Review England.
C. Camacho, G. Coulouris, V. Avagyan, M.N. Papadopoulos, K. Bealer and T.L. Madden.
Blast+: architecture and applciations. BMC Bioinformatics, 10: 421, 2009
S. R. Eddy. Where did the blosum62 alignment score matrix come from?
Nat Biotechnol, 22(8):1035–6, 2004. Evaluation Studies Journal Article Review United States.
Ian Korf, Mark Yandell, Joseph Bedell, and Stephen Altschul.
BLAST. [“An essential guide to the Basic Local Alignment Search Tool”. Includes bibliographical references and index.]
O’Reilly, Sebastopol, Calif. ; Farnham, 2003. GB A3-Y7706 ill. ; 24 cm.
A. A. Schaffer, L. Aravind, T. L. Madden, S. Shavirin, J. L. Spouge, Y. I. Wolf, E. V. Koonin, and S. F. Altschul.
Improving the accuracy of psi-blast protein database searches with composition-based statistics and other refinements.
Nucleic Acids Res, 29(14):2994–3005, 2001. Journal Article Review England.
Y. K. Yu, E. M. Gertz, R. Agarwala, A. A. Schaffer, and S. F. Altschul.
Retrieval accuracy, statistical significance and compositional similarity in protein sequence database searches. Nucleic Acids Res,
34(20):5966–73, 2006. Evaluation Studies Journal Article Research Support, N.I.H., Intramural England.
75
Appendix B – Creating local BLAST databases
Obtaining local BLAST databases
To get the most from BLAST, you should search against a relevant database, which may mean using the
relevant parts of a larger database. In general, BLAST searching against the whole of nr or the whole of embl
is not a particularly good idea. It takes up your time and computer resources, returns BLAST results with less
useful statistics and often less meaningful results. For example, if you are studying marine viruses, do you
really care about all the mouse sequence in nr or embl?
Web resources often offer different data subsets you can search against. For example, using the NCBI
BLAST pages, you can choose from a certain number of database sections, or you can fine tune the sequence
set you blast against using Entrez queries:
http://blast.ncbi.nlm.nih.gov/Blast.cgi?CMD=Web&PAGE_TYPE=BlastDocs&DOC_TYPE=FAQ#entrez
http://www.ncbi.nlm.nih.gov/bookshelf/br.fcgi?book=helpentrez&part=EntrezHelp
Using the EBI BLAST services, you can choose from a number of data subsets, as well as having a choice of
WU-blast or NCBI blastall.
http://www.ebi.ac.uk/Tools/blast/
To run BLAST locally, you need to index your collection of sequences; it is these indices that BLAST reads
when searching. For some databases or database divisions, you can download prepared BLAST indices from
sites such as the NCBI. These are convenient, but do restrict you to searching against particular sets of
sequences. It is often useful to create a set of sequences chosen for the types of searches you wish to carry
out (e.g. organism or tissue specific) and format them into a database you can search using BLAST.
Any set of fasta sequences can be indexed for BLAST searching. Creating useful sets of sequences is beyond
the scope of this course, but two resources to consider are SRS (http://srs.ebi.ac.uk) and Entrez
(http://www.ncbi.nlm.nih.gov/books/bookres.fcgi/helpentrez/EntrezHelp.pdf).
For NCBI blastall, the formatdb command is run on fasta formatted files to create BLAST indices.
For BLAST+, the program used is called makeblastdb, and this is the you want to use, though BLAST+ will
happily search databases made with formatdb.
Some data resources useful for local BLAST
URL
Database File
format
Contents
ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/uniprot/
uniprot
fasta
Uniprot, swissprot and
trembl
[ftp://ftp.ebi.ac.uk/pub/databases/uniprot/current_release/knowledgebase/taxonomic_divisions/ ftp://ftp.ebi.ac.uk/pub/databases/uniprot/current_rele
ase/knowledgebase/taxonomic_divisions/]
uniprot
embl
Uniprot divisions
[ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/emblrelease/ ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/emblreleas
e/]
embl
fasta
Individual embl divisions
ftp://ftp.ebi.ac.uk/pub/databases/embl/release/
embl
embl
Individual embl divisions
[ftp://ftp.ncbi.nlm.nih.gov/blast/db/ ftp://ftp.ncbi.nlm.nih.gov/blast/db/
ftp://ftp.ebi.ac.uk/pub/blast/db/]
various
blast
nr, nt, env and a few other
BLAST formatted databases
or database sections.
ftp://ftp.ncbi.nlm.nih.gov/genbank
genbank
genbank
Individual genbank divisions
76
One thing to note in the table above is that uniprot divisions are provided in embl format. However, BLAST
indices are created from fasta format files. Unfortunately, the EMBOSS program seqret, which you saw
earlier, does not handle entire database divisions well. Instead, you can use a simple script to do the
conversion. Instructions on this are below.
If you choose to use pre-formatted BLAST databases, make sure you read the notes about them (usually
available as a file called something like REAMDE on the FTP site you get the BLAST files from) as they
can be slightly different than the database that results from downloading and formatting your own.
Building BLAST indices from local sequence files
We will use the uniprot swissprot virus division as an example here. As this is distributed in embl format,
and we need it in fasta format, we include a format conversion step in the instructions below.
Bio-Linux machines by default have the BLASTDB environmental variable set to a central location. To find
out where it is set to on your machine, you can use the command:
echo $BLASTDB
If you are logged in as an administrative user, then you will be able to download and work in any area on the
machine using your sudo privileges. If you are on a multi-user system and are not an administrative user, the
default location for BLAST databases may not be writable by you. In this case, you should talk to your
system administrator: either to ask them to give you privileges in the central BLAST database folder, or warn
them that you are about to use lots of space in your account for BLAST databases.
These instructions assume that you are working from the directory where you will be storing your BLAST
database files. This is not normally the case. Usually, if you download BLAST databases into your account,
it is easiest to set the BLASTDB environmental variable to the location of these BLAST databases, and then
work from a convenient folder where you plan to store your results. You can set the BLASTDB
environmental variable for a single session by typing a line of the form below in the terminal you are
working in. To set this variable for every session, you can add the line to your ~/.zshrc file.
export BLASTDB=”$HOME/blastdb”
●
Download the database section of interest. Here we will work with the uniprot swissprot virus division:
wget
77
Understand your databases
It is important to read the documentation about the databases you choose to work with.
For example, uniprot and nr are not the same. nt is not a non-redundant database; nr is.
Knowing what is in a database you work with is vital in understanding your results.
Nucleic Acids Research publishes a database issue in January of each year.
This is an excellent resource for finding out more about available database resources.
Another useful resource is the information available via the links on the Library page of SRS at the EBI:
http://srs.ebi.ac.uk/srsbin/cgi-bin/wgetz?-page+top
●
If you don’t already have a sequence conversion tool, download the emblToFastaAndPreProcess.pl
script from the NEBC site.
wget http://nebc.nerc.ac.uk/downloads/scripts/bioinf/emblToFastaAndPreProcess.pl
This script converts embl sequence to fasta sequence. Due to issues that sometimes appear because of the
formatting of information in the feature table, it does so by removing the feature lines from the entry before
conversion. A version of the script that does not pre-edit the feature lines is also available:
http://nebc.nerc.ac.uk/downloads/scripts/bioinf/emblToFasta.pl
●
Make this script executable.
chmod u+x emblToFastaAndPreProcess.pl
●
This script can handle compressed files, so you can create a fasta formatted copy of the
uniprot_sprot_viruses division by running the command:
./emblToFastaAndPreProcess.pl uniprot_sprot_viruses.dat.gz
Notice the ./ at the start of the line. You need this if you are running the script from the directory you are in.
There are better ways to do this if you plan to keep this script for use again, but they are not covered here.
●
When the script is finished, you should find a file called uniprot_sprot_viruses.fasta in your directory.
This is the file we build the BLAST database from.
makeblastdb -dbtype prot -in uniprot_sprot_viruses.fasta -out sprot_virus
●
You should now have four new files in your directory: sprot_virus.psq, sprot_virus.pin, sprot_virus.phr
and formatdb.log. The last of these lets you know how the BLAST formatting went.
The sprot_virus.p* files are your BLAST indices. You search against them by specifying the BLAST
database name sprot_virus.
Note:
If you were interested in the swissprot virus division, you would probably be interested in the trembl virus
division also. You could download and format that division as described above, and then search the swissprot
and trembl virus divisions separately, or as a single, virtual database. Alternatively, you could create a single
BLAST formatted database from the two fasta files using cat and makeblastdb:
cat uniprot_sprot_viruses.fasta uniprot_trembl_viruses.fasta |
makeblastdb -in - -out uniprot_viruses -dbtype prot -title “combined sprot and trembl virus divisions”
What is the best division to search against depends on what you need to accomplish.
78
Appendix C - Cheat sheet of basic Linux commands
bg
To send a suspended job to the background
cat fileName1
Output a file to the screen (see also more and less)
cat file1 file2 file3 > newfile
Append three files together and put the result in newfile
cat -nA file1
Output a file to screen, numbering all lines and revealing non-
printing characters
cd dirName
Change to directory dirName. Use cd .. to go up one dir or just
cd to go home.
chmod
To change the permissions or protection on a file, to allow
everyone to read a file (chmod a+r somefile)
clear
clear the terminal screen
cp fileName1 fileName2
create a copy of the file called fileName1 and call the copy
fileName2
cp fileName directoryName
copy the file fileName into a directory called directoryName
cp –R dirName1 dirName2
copy a whole directory called dirName1 and its contents into
another directory called dirName2.
date
Print the current date and time
df –h
File system information including space usage
diff file1 file2
Summarise differences between two similar text files file1 and
file 2. See also the graphical tool, meld
echo $NAME
Print the value of an environment variable called $NAME
emacs
A text editor, more powerful than gedit, but more complex.
evince
A command for viewing postscript or PDF formatted files
exit
Exit the current terminal
export NAME=value
Set the environment variable $NAME to “value”
fg
Brings a suspended or background job to the foreground
file fileName
Tries to determine what fileName is by looking at the contents
find -name “test*”
Scans for filenames matching a given glob pattern in the current
folder and subfolders. This command is tricky to use. To scan
the whole system for files, try locate.
gedit
The standard text editor
grep
Search for the occurrence of a pattern
groups or id
Show what groups a user is in.
head fileName
Show just the first few lines of fileName
history
List log of previous commands you have entered
jobs
Lists any suspended or background processes that you have
running. See also ps and pgrep
kill pid
Kill a process that is running where pid is the process id number
(see ps). Also consider pgrep and pkill.
last
Info about who has logged onto the machine recently
79
less
Type a file to the screen one page at a time (press q to quit,
spacebar for next page, b to go back a page)
ls
List the files in your directory
ls –l
List the files in your directory but with “longer” information.
(Add -h for more readable file sizes)
man command
For help about UNIX command “command”
man -k keyword
Lists all UNIX commands that mention the word “keyword”
mkdir dirName
Make a directory
more fileName
Type a file to the screen a page at a time (press q to quit, spacebar
for next page).
mv file1 dirName
Assuming dirName is an existing directory, move a file called file1
into a directory called dirName
mv file1 file2
Rename file1 and call it file2
nano
A basic text editor that runs in the terminal
passwd
Change your password
pgrep pattern
Find process names that contain the pattern. See also ps
pkill processname
Kill a running process using the process name. Be careful with
this! See also ps, pgrep and kill
pwd
Print the full path of your current directory
ps –u
List your current processes
ps –aux
List all processes on the machine. See also top
rm fileName
Delete a file
rm –rf dirName
Delete a directory and all its contents
rmdir
Delete an empty directory
screen
Run the screen manager (read the man page first!)
stat fileName
Show detailed info on fileName, similar to ls -l
tail
Show just the last few lines of a file. See also head.
tar -xvz -f fileName.tar.gz
Unpack a tarball from the file fileName.tar.gz
someCommand '''| tee fileName
Save output of someCommand to fileName and also print to
screen. Use instead of >fileName if you want to redirect but still
see the output.
top
List the processes running that are using the most CPU
touch fileName
Create an empty file (also updates file timestamps)
wc -l fileName
Count lines in fileName
which commandName
Reveal what will really be run when you give a command
w or who
List users currently logged on
yes
A very useful command ;-)
Ctrl-c
Stop (interrupt) a process
Ctrl-r
Interactively search in command log. See history
Ctrl-z
Suspend a process, see also jobs, fg and bg
80
81
Table of Contents
PART ONE: INTRODUCTION TO THE BIO-LINUX 8 SYSTEM……………………………………..1
Logging in and exploring the Bio-Linux desktop…………………………………………………………………………………………………1
Running applications……………………………………………………………………………………………………………………………………….3
Finding files and drives……………………………………………………………………………………………………………………………………3
Setting things up……………………………………………………………………………………………………………………………………………..4
Finding your way on the system…………………………………………………………………………………………………………………………7
The Root Folder………………………………………………………………………………………………………………………………………………..7
Using the command shell……………………………………………………………………………………………………………………………………8
Anatomy of a Command………………………………………………………………………………………………………………………………….9
Listing files in a directory………………………………………………………………………………………………………………………………10
Learning about Linux commands…………………………………………………………………………………………………………………….11
Basic Linux tips for filenames………………………………………………………………………………………………………………………..12
Getting the prompt back when running graphical applications from the terminal………………………………………………….12
Linux shorthand and shortcuts………………………………………………………………………………………………………………………..13
More Basic Linux Commands………………………………………………………………………………………………………………………….13
Changing directories……………………………………………………………………………………………………………………………………..14
Tab completion……………………………………………………………………………………………………………………………………………..15
Command history…………………………………………………………………………………………………………………………………………….17
Making a directory………………………………………………………………………………………………………………………………………..17
Office software………………………………………………………………………………………………………………………………………………..18
Using text editors……………………………………………………………………………………………………………………………………………..19
Nano……………………………………………………………………………………………………………………………………………………………19
Gedit……………………………………………………………………………………………………………………………………………………………19
Reading text files……………………………………………………………………………………………………………………………………………..20
An important note on line endings – CR and LF……………………………………………………………………………………………….21
Copying files……………………………………………………………………………………………………………………………………………………22
Linking to files…………………………………………………………………………………………………………………………………………………23
Removing files and directories………………………………………………………………………………………………………………………….24
Redirecting output to files………………………………………………………………………………………………………………………………..25
Piping output between applications………………………………………………………………………………………………………………….26
Diff, Grep and Sort………………………………………………………………………………………………………………………………………….27
Diff……………………………………………………………………………………………………………………………………………………………..27
Grep…………………………………………………………………………………………………………………………………………………………….27
Environment Variables…………………………………………………………………………………………………………………………………….29
Changing permissions on files and directories…………………………………………………………………………………………………..30
Some other useful information…………………………………………………………………………………………………………………………31
Copying and pasting text………………………………………………………………………………………………………………………………..31
The simple way to stop a process…………………………………………………………………………………………………………………….31
Putting a command to one side……………………………………………………………………………………………………………………….31
Logging out of a session………………………………………………………………………………………………………………………………..31
Clearing your terminal of text…………………………………………………………………………………………………………………………31
Accessing a running program or working with others interactively……………………………………………………………………..32
Accessing your machine – including a full graphical desktop - remotely……………………………………………………………..32
PART TWO: INTRODUCTION TO BIOINFORMATICS ON BIO-LINUX………………………..33
Documentation and Help for Bioinformatics Software on Bio-Linux…………………………………………………………………33
Bio-Linux Bioinformatics Documentation……………………………………………………………………………………………………….33
Help Functions within the Programs………………………………………………………………………………………………………………..34
Example data for this tutorial…………………………………………………………………………………………………………………………..34
Interface choices………………………………………………………………………………………………………………………………………………35
General points about working with bioinformatics programs……………………………………………………………………………36
Sequence formats………………………………………………………………………………………………………………………………………….36
File naming conventions in bioinformatics……………………………………………………………………………………………………….37
Naming files and the danger of over-writing previous results……………………………………………………………………………..39
A common problem: what is a text file and what is not………………………………………………………………………………………39
GZipped files in bioinformatics………………………………………………………………………………………………………………………40
EXAMPLES OF RUNNING BIOINFORMATICS PROGRAMS ON BIO-LINUX………………41
Analysing sequences with QIIME…………………………………………………………………………………………………………………….41
Preparation…………………………………………………………………………………………………………………………………………………..42
Assign Samples to Multiplex Reads………………………………………………………………………………………………………………..42
Processing sequences into OTUs…………………………………………………………………………………………………………………….43
Data to information……………………………………………………………………………………………………………………………………….44
Heatmap………………………………………………………………………………………………………………………………………………….45
Taxonomy Summary Charts……………………………………………………………………………………………………………………….45
Diversity………………………………………………………………………………………………………………………………………………………45
Alpha………………………………………………………………………………………………………………………………………………………45
Beta…………………………………………………………………………………………………………………………………………………………45
Inter-Sample Distance……………………………………………………………………………………………………………………………….46
Jackknifing & UPGMA……………………………………………………………………………………………………………………………..46
Analysing sequences with MOTHUR………………………………………………………………………………………………………………..47
Preparation…………………………………………………………………………………………………………………………………………………..47
Assign Samples to Multiplex Reads and Quality Filtering………………………………………………………………………………….48
Generating Alignment & Distance Matrix………………………………………………………………………………………………………..48
Classify Sequences………………………………………………………………………………………………………………………………………..49
Renaming Files……………………………………………………………………………………………………………………………………………..49
Clustering Sequences…………………………………………………………………………………………………………………………………….49
Generating OTU Table and Normalisation……………………………………………………………………………………………………….49
Classifying OTU…………………………………………………………………………………………………………………………………………..50
Converting the shared file to BIOM-format………………………………………………………………………………………………………50
Data to information……………………………………………………………………………………………………………………………………….50
Heatmap………………………………………………………………………………………………………………………………………………….50
Venn Diagram…………………………………………………………………………………………………………………………………………..50
Finding and running useful scripts…………………………………………………………………………………………………………………..51
Aligning sequences using MUSCLE………………………………………………………………………………………………………………….51
BLAST……………………………………………………………………………………………………………………………………………………………53
A few examples of ways to run BLAST, on Bio-Linux or otherwise……………………………………………………………….53
What this course covers……………………………………………………………………………………………………………………………..53
Why use BLAST on the command line?………………………………………………………………………………………………………53
General considerations for database searching……………………………………………………………………………………………..54
A very, very brief introduction to BLAST+………………………………………………………………………………………………….54
How a BLAST database looks on the file system………………………………………………………………………………………….55
A simple blastp search……………………………………………………………………………………………………………………………….55
Formatting BLAST output…………………………………………………………………………………………………………………………56
Handling multiple sequences……………………………………………………………………………………………………………………..57
BLAST searching using fasta files containing more than one sequence……………………………………………………….57
Processing multiple files using a foreach loop……………………………………………………………………………………………………57
Working with lots of BLAST results……………………………………………………………………………………………………………61
EMBOSS Programs…………………………………………………………………………………………………………………………………………62
Ways to run EMBOSS programs:……………………………………………………………………………………………………………….62
A comparison of the Jemboss and command line interfaces for EMBOSS programs…………………………………….63
Working with EMBOSS programs………………………………………………………………………………………………………………63
Using the EMBOSS command line……………………………………………………………………………………………………………..65
A very basic sequence assembly………………………………………………………………………………………………………………………..69
Quality Checking………………………………………………………………………………………………………………………………………69
Split Barcodes………………………………………………………………………………………………………………………………………….69
Clean Up………………………………………………………………………………………………………………………………………………….70
Assembly With Velvet……………………………………………………………………………………………………………………………….71
Assembly With Abyss……………………………………………………………………………………………………………………………….71
Assessing The Assemblies………………………………………………………………………………………………………………………….72
Adding Some Annotation…………………………………………………………………………………………………………………………..72
Artemis……………………………………………………………………………………………………………………………………………………………73
Ways to run Artemis:…………………………………………………………………………………………………………………………………73
Appendix A – BLAST references and documentation………………………………………………………………………………………..75
Web pages……………………………………………………………………………………………………………………………………………………75
References……………………………………………………………………………………………………………………………………………………75
Appendix B – Creating local BLAST databases………………………………………………………………………………………………..76
Obtaining local BLAST databases………………………………………………………………………………………………………………76
Building BLAST indices from local sequence files……………………………………………………………………………………….77
Appendix C - Cheat sheet of basic Linux commands…………………………………………………………………………………………79
Copyright and redistribution:
This document is the work of many authors over many years. Unless otherwise stated the material is Copyright NERC.
You may redistribute the complete document and its associated files without restriction in any format.
If you re-use substantial portions of this text in derivative works you must acknowledge the authors (CC-BY). We would
also appreciate you letting us know if you re-use our stuff.
If you use Bio-Linux for your science, please cite us! See the website for further info.
Part One: Introduction to the Bio-Linux 8 System
Logging in and exploring the Bio-Linux desktop
You can log into your Bio-Linux machine locally or over the network, on a fully installed system or a Virtual
Machine or on a system running Live from a USB memory stick or a DVD.
These course notes are written from the perspective of someone running the Live version of the system – that
is, having booted a PC directly from a USB memory stick and selected “Try Bio-Linux”. The main
differences for people working on an installed system will be the name of the account you are logged into
and what privileges that particular user account has. For example, the user of the Live system always has full
administrative privileges. So don’t worry if you find small differences between what is described here and
what you see on your system.
Please refer to our on-line document about various ways you can set up a Bio-Linux system:
http://environmentalomics.org/bio-linux-installation
If you are booting the machine from a DVD or a USB memory stick, when prompted, select
Option 1: Try Bio-Linux
After the system has started up, you will see the Bio-Linux desktop (Figure 1).
1
Figure 1: A view of the Bio-Linux 8 desktop
There are three icons on the desktop
●
Install Bio-Linux 8
On the Live System only – click this icon to start the Bio-Linux installer
●
Bio-Linux Documentation Opens a menu of links as follows:
◦
NEBC Homepage
Opens the NEBC home page in a web browser
◦
User Guide
Opens the Bio-Linux Userguide – a basic introduction to system admin
◦
Introductory Tutorial Opens the folder of Introductory Bio-Linux tutorials and data files
◦
Bioinformatics Docs Shows the NEBC Bio-Linux Bioinformatics Documentation System
●
Sample Data
Provides access to much sample data to help you in trying out new
software
On the left of the screen you will see the Dash, which is used to launch and organize applications. The
dash is populated by a column of large button icons. The Dash Button at the top with the Ubuntu logo
brings up the main Dash panel to find files and applications (see below). The other icons are, by
default, from the top:
1.
Open your home folder
2.
Launch Firefox web browser
3.
Launch Evolution mail reader
4.
LibreOffice Writer word processor
5.
LibreOffice Calc spreadsheet
6.
LibreOffice Impress presentation editor
8. Shell Terminal
9. Ubuntu Software Centre (find and install
apps)
10. System Settings and User Preferences
11. Virtual Desktop Switcher
12. Disks and USB removable media
13. Rubbish Bin (deleted files area)
On the top of the screen you will see the menu and panel bar (Figure 2).
Figure 2: The menu and panel bar, found at the top of the screen.
If you open an application window, the name of the active application will appear in the left portion of this
bar. If you move the mouse over it, a context menu for the active window will appear (like on Apple Mac).
The right portion of the bar has a panel of icons to control some system settings.
From left to right, the things you see in the panel area above are:
1. Network monitor and setup (the icon shown
indicates WiFi is active – you may see others)
2. Keyboard selector (defaults to UK keyboard)
3. Battery monitor (on laptops only)
4. Audio volume control
5. Wall clock (click it for a calendar)
6. System menu (includes access to system
settings and options to lock screen, switch
user, shut down, etc.)
2
Running applications
Clicking the Dash Button at the top left of the screen opens a panel where you can search for applications
and files on the system. This includes bioinformatics tools and any other applications you have installed.
Start typing either the application name or a keyword, or select the DNA icon at the bottom (circled in the
image) to see a list of bioinformatics tools and resources.
Figure 3: Searching for applications in the Dash
The applications found in the menu are by no means all the means all those found on the system. Most
bioinformatics applications need to be run from the terminal as detailed at length in this tutorial.
Finding files and drives
The file cabinet icon near the top of the Dash takes you directly to your Home folder.
Figure 4: Your home folder
3
Your personal Desktop, and folders in your Home area called Documents, Pictures, Videos, etc. are listed.
You can use these or else create your own folders as you wish.
The file browser provides convenient shortcuts to these directories in the left pane, even if you are viewing
another folder in the main panel.
Devices recognized by your system such as the disk drives, CD/DVD devices, USB sticks, etc. are listed at
the bottom of the left pane. Removable media can be ejected by clicking the icon next to the device name.
Networks resources can be accessed through the Browse Network icon. This includes Windows network
shares using the CIFS protocol and files on other Bio-Linux machines if you can access them via the SFTP
protocol. Browsing regular FTP servers is also supported.
Note: The Dash also has a file and media finder, as seen on the previous page, selected by clicking the
Ubuntu button at the top left to bring up the Dash console and then selecting one of the little white icons
from along the bottom of the window.
Setting things up
The System settings icon
allows you to customise
and administer your system (Figure 6) in various ways.
The Personal area is used for customising a variety of
attributes relating to your personal preferences.
The Hardware and System areas allow you to do things such
as configuring hardware drivers, changing firewall settings,
administering users and groups, and managing the packages on
your system.
Other features - Virtual Desktops etc.
The icon that looks like this:
allows you to switch
“virtual desktops”. Unlike Windows, Linux by default gives you access to multiple desktop areas. This
allows you to have windows open for different things in different virtual desktops. For example, if you were
working on writing an article, you could have programs relevant to that work open and visible via one of
these desktops. Meanwhile, you could have programs related to sequence analysis open on another desktop,
and so on. This is a great tool for keeping things organised during your working day. Clicking the icon will
zoom out to show an overview of all desktops. You can also switch quickly by holding down Ctrl+Alt and
tapping the arrow keys on the keyboard.
The Deleted Items Folder icon
(also commonly referred to as a Rubbish Bin or Trashcan) is the
bottom icon the Dash. This is where files deleted in the file browser usually end up. This gives you a chance
to salvage them if you deleted them by mistake. Deleting files on the system is covered in more detail in the
Removing Files and Directories section of this tutorial.
4
Figure 5: The System Settings Window
Exercise 1-1
a) Exploring the desktop
Take some time to explore the desktop. Look at the options under each of the icons covered in the previous
section, and try the various subsections in the Dash console.
Try
clicking the icons on the desktop. Also try
using the right and middle mouse buttons when the mouse pointer is over the icons in the Dash and explore
the menus presented to you.
Try going to a different virtual desktop and starting up some windows/applications there. Try moving
windows off one desktop area and onto another.
b) Obtaining the example files for this tutorial
The sample files referred to in this tutorial can be found on the system as a compressed package file. You’ll
need to copy and unpack them before proceeding.
Copying the compressed file from the tutorials folder on the system
●
Double-click the Bio-Linux Documentation icon on the desktop
●
Open the Introductory Tutorial
●
Drag the bioinf_files.tar.gz file to the left and drop it over the word Home to copy it to your home
folder.
Note that a copy of this file can also be found online if you need it for some reason.
http://nebc.nerc.ac.uk/downloads/courses/Bio-Linux/bioinf_files.tar.gz
c) Extracting the files from the compressed tarball
The file you just downloaded is referred to as a tar file or tarball. Tar is a utility similar to Winzip; it
makes package of files. The extra .gz extension shows that the gzip method has been used to compress the
tar file.
Here are two equivalent options for how to unpack these files, one on the command line and one graphical.
Both should produce the same result.
Option 1 – extracting via the command line
●
Open a new terminal by clicking the icon in the dash —>
●
Type the following at the command prompt and press the enter key :
tar -xz -f bioinf_files.tar.gz
This command uncompresses and unpacks the contents of the tar file into your current working directory,
which in this case is your home folder. You should then see a new prompt, just like this:
5
(exercise 1-1 continued)
If you see an error, try typing the command again, making sure it is exactly as shown above including
spaces, hyphens, underscores, etc. If the error says “No such file or directory ” then check you really did
copy the file in step (b) above. You can confirm the extraction worked by looking in the file browser or
using the ls command.
Option 2 – extracting via a graphical interface
But don’t use this version – we’re trying to learn about the command line here!!
●
Open your Home Folder by clicking the file cabinet icon in the Dash.
●
Click the right mouse button over the bioinf_files.tar.gz file and select Extract Here.
d) Re-visiting the command above
Press the up arrow key while in the terminal. The previous command should re-appear for you to edit.
You can move the cursor left and right using the keyboard but don’t try to move it with the mouse – that
won’t work.
Edit the command by adding an extra ’v’ righ after ’-xz’ so that the full command reads:
tar -xzv -f bioinf_files.tar.gz
Hit the enter key to run it. You don’t need to scroll the cursor back the end before you do this. What is
the result this time?
The letters after the hyphens are parameters of the tar command: x means “unpack/extract”, the z means
“the file should be uncompressed with gzip”, the f indicates the file to unpack, and the v you just added
means “be verbose”. Therefore on this occasion you should have seen a list of the files being unpacked.
This is a common behavior for many Linux commands. If the command runs successfully without errors
it says nothing and just goes right back to the prompt. If you want the command to tell you what it is
doing, adding -v makes it verbose, otherwise you may assume that “no news is good news”.
The use of the cursor keys to re-visit commands is a major time-saver in the terminal and you must get in
the habit of doing this. The other major time-saver is Tab completion which we will come to soon.
e) Removing the compressed tarball
The unpacked files that you will be working with in this tutorial are now in a directory called bioinf_files.
You can remove the compressed tar file now if you wish. Again, this can be done via the command line or
using the graphical file browser but we’ll stick with the command line version. More details about how to
remove files from the system are covered in the Removing Files and Directories part of this tutorial.
●
Open a terminal window if you don’t have one already.
●
Type the following into the terminal, then press Enter:
rm bioinf_files.tar.gz
●
Enter “y” to agree when you are asked if you wish to delete the file.
6
Finding your way on the system
In Linux/Unix systems, documents are usually referred to as files, and file folders are referred to as
directories.
Your Bio-Linux file system can be thought of as a huge file folder (directory), inside of which are many
other file folders (directories). Inside these there are more nested file folders (directories), and so on. As in
the real world, where file folders can contain documents and other file folders, in Linux directories can
contain files and other directories. The hierarchy of folders is called the directory tree.
Your personal Home folder is one directory within the tree of directories that make up your Bio-Linux
machine. In your account, you can create other directories, store data, run programs, etc. A graphical view of
your home directory is available by clicking on the file cabinet Files icon in the Dash toolbar (Figure 5). This
opens up a window that shows the files and directories in your Home. The full name of this folder on the
system is /home/live, ie. a directory named after the login account, live, within the top-level directory named
/home, but the graphical file browser just shows it as Home.
Linux enforces file permissions depending on the login account. By default on Bio-Linux, your account has
the right to create, delete and edit files in your own Home folder, but not in other people’s accounts or in
system directories. You can be given permission (or give yourself permission, if it’s your system) to work on
files in such areas, and some information on setting file permissions is given later in this course. Your system
administrator or local IT support should be able to help you with sharing files if they are on a shared server.
You can use the graphical file browser to explore directory areas on the machine, and to move around in your
own files. It allows you to accomplish most typical file operation, including opening files and copying,
moving or deleting files using drag and drop or copy/cut/paste. To view areas of the system outside your
Home directory, click on Computer under Devices in the left hand pane to see the root directory of the
system.
Exercise 1-2
●
If you have not done so already, click on the filing cabinet Files icon near the top of the Dash
●
Double-click on the bioinf_files directory that you unpacked in Exercise 1-1, to view the contents
●
Investigate the options under the file browser menus. These appear on the bar at the very top of the
screen.
●
Click on the Computer icon in the left panel. This allows you to see the root directory – the base of the
whole filesystem hierarchy.
●
Find the folder called home and double click on it.
●
You should see a single folder called live listed. Select this to get back to your Home folder. If you
are not working on a live-booted system you should see a folder with your username, and other user
folders may also listed. A lock symbol on a folder would inform you that you do not have permission to
view the contents of that folder.
The Root Folder
The name of the base directory of the whole system, the one within which every file on the system is
contained, is the root directory. It is referred to by a single forward slash “ / ”.
When you work in the graphical file browser it shows your location relative to your Home folder, unless you
are looking at files outside your Home in which case it shows the location relative to the root. You should
have seen how the location changed as you browsed folders in exercise 1-2.
7
Figure 6: Location path for Templates folder in File Browser view.
Your personal home folder (actually called live but labeled as Home), sits within the directory called home
(with a small h), that contains homes for all users. This directory home is under the root directory,
represented by a tiny picture of a disk in the graphical view or a single forward slash in the terminal.
In other words, this information tells you where you are in system.
The location of a file or directory within the system is its path. If you are asked for the full path or absolute
path to a file, you need to provide a complete listing of all the directories traversed on the system to get to
that file. That is, you need to give the full path from the root directory to that file. The path is written by
starting with a forward''' slash “/” then listing the names of the directories you need to traverse in the system
to find that file, with each directory name separated with another forward slash.
To see the full path in the conventional format most command-line programs would expect you to provide,
press Ctrl-L while viewing a File Browser window. You should see something like this:
To summarize the syntax provided in Figures 9 and 10:
/home
home is a directory located within the root directory
/home/live
live is a directory within the directory home which is within the root
directory. This special directory will sometimes be shown as
Home, with a
capital H, because it is the home folder for the live user.
As another example: the full path to the file capsall.fasta, in the bioinf_files directory within the home
directory of the live user:
/home/live/bioinf_files/capsall.fasta
Often you can provide just the route from where you are on the system to where your file is; this is referred
to as a relative path. For example, if you are working in your home directory, the relative path to the file
mentioned above would be bioinf_files/capsall.fasta.
Keeping things organised
Everyone knows it, but it’s worth restating: if you start by creating a folder structure with meaningfully
named subfolders, name your files so that the names indicate the contents (or follow some defined naming
convention), and store your files in the right place, your life will be much, much easier!
Using the command shell
The real power of Linux/Unix systems is the command line.
A list of common Linux commands is provided in Appendix D of this document for reference.
Many programs and facilities are available through graphical options on Linux, but all programs and
facilities can be accessed by the command line, also known as the shell. Some tasks are easier, or more
appropriately done using graphical interfaces. Equally though, other things are easier or more appropriately
8
Figure 7: Location in graphical file browser given in text; this is the the full
path to the Templates folder in the home directory of the live user account.
done using the command line. Obvious examples include when you need to work with large numbers of files
or want to automate processes. First steps on the command line can be hard but the rewards are worth it (we
promise!)
Access to the command line is done through a terminal window.
You can open a new terminal by:
●
clicking the middle button on the terminal icon on the Dash toolbar
●
or, going into an already open terminal and typing a command to open a second terminal:
gnome-terminal &
Anatomy of a Command
Linux/Unix commands usually take the form shown in Figure 11. You’ve already seen a good example in
Exercise 1-1 part c.
The first word you supply on the command line is interpreted by the system as a command; that is –
something the system should do or a program to be run. Items that appear after that on on the same line are
separated by spaces. The additional input on the command line indicates to the system how the command
should work. For example, what file you want the command to work on, or the format for the information
that should be returned to you.
Most commands have options available that will alter the way the command functions. You make use of
these options by providing the command with parameters, some of which will take arguments. Examples in
the following sections should make it clear how this works. With some commands you don’t need to issue
any parameters or arguments. Occasionally this is because there are none available, but usually this is
because the command will use default settings if nothing is specified.
If a command runs successfully, it will usually not report anything back to you, unless reporting to you was
the purpose of the command (eg. ls). If the command does not execute properly, you will see an error
message returned. Some of these messages are hard to decipher until you have a bit of Linux experience but
ultimately they should tell you what has gone wrong.
Note: Items supplied on the command line separated by spaces are interpreted as individual pieces of
information for the system. For this reason, a filename with a space in it will be interpreted as two filenames
by default. How to get around this is is addressed in more detail later in the course.
Note 2: The use of the ampersand in the previous example, gnome-terminal &, is explained in a few pages
time. You would not put an ampersand on the end of most shell commands.
9
Figure 8: The Linux/Unix command line structure. Each part of a command is separated by
one or more spaces.
command
parameters
arguments
what I want to do
how I want to do it
on what do I want to do it
eg: tar
-xvz -f
bioinf_files.tar.gz
Listing files in a directory
The command ls lists files in a directory.
By default, the command will list the filenames of the files in your current working directory. When you first
open a shell this is your home directory.
If you add a space followed by a –l (that is, a hyphen and a small letter L), after the ls command, it alters the
behavior of the command: it will now list the files in your current directory, but with details about them
including who owns them, what the size is, and what kind of file it is. Information about this is shown in
Figure 11.
Exercise 1-3
a) Try browsing files in both the terminal and the graphical file browser:
●
Open a new terminal by clicking the terminal icon
●
In the terminal, type the command ls. Compare what you see listed with what you see in the graphical
representation of your Home directory.
●
Type the command ls –l and note the kind of information being provided and how it compares to the
graphical representation of your files.
●
In the graphical File Browser, click on the List option under the View menu, and compare this
information to that provided using the ls –l command.
●
In the console, type ls –l bioinf_files and also click on the bioinf_files folder in the graphical file
browser and compare what you are seeing.
You can also use glob patterns to identify file names by pattern.
*
an asterisk means any string of characters
?
a question mark means a single character
[ ]
square brackets can be used to designate a group of characters
More details about this are given in the Linux shorthand and shortcuts '''section below.
10
Figure 9: The detailed output of the command ls when run with the -l flag
drwxr-xr-x 6 manager
users 4096 2008-08-21
09:26 twilliams
-rw-r–r– 1
manager
users 9784 2007-03-19
14:09 hybInfo.txt
-rw-r–r– 1
manager
users 9784 2007-03-19
14:09 targets_v1.txt
-rw-r–r– 1
manager
users 7793 2007-03-19
14:14 targets_v2.txt
File
type
File
permissions
User
Group
File
size
Date and time
modified
Filename
(Exercise 1-3, continued)
b) Try these commands that use wildcards to match multiple files:
●
List all the files in the directory bioinf_files. that start with the letters tes
ls bioinf_files/tes*
●
List all the files in your directory that start with tes, and end in 1.embl, 2.embl or 3.embl
ls bioinf_files/tes*[123].embl
Learning about Linux commands
Most Linux commands have a manual page that provides information about the command and options that
can alter its behaviour. Many tasks can be made easier by using command options. A good rule of thumb is
to ask yourself whether what you want to do is something many others may have wanted to do. If the answer
is yes, then there may well be commands and options available to do that task.
Linux manual pages are referred to as man pages. To open the man page for a particular command, you just
need to type man followed by the name of the command you are interested in. To browse through a man
page, use the cursor keys (↓ and ↑). To close the man page simply hit the q key on your keyboard.
If you do not know the name of a command to use for a particular job, you can search using man –k
followed by the type of thing you are trying to do. An example of this is in exercise 1-3, part c).
(Exercise 1-3, continued)
c)
●
Look up the manual information for the ls command by typing the following in a terminal:
man ls
●
Skim through the man page. You can scroll forward using the up and down arrow keys on your
keyboard. You can go forward a page by using the space bar, and move backwards a page by using the b
key.
●
What does the -h option do? What about the -a option? What would running ls -lrt do?
●
Press the q key when you want to quit reading the man page.
●
Try running ls using some of the options mentioned above.
●
Look up some programs with man pages with the keywords “list directory”
man –k “list directory”
11
Basic Linux tips for filenames
•
Linux does not deal well with spaces in filenames!
Or to be more precise, Linux itself deals perfectly well with spaces and all manner of special characters in
filenames but many programs you’ll want to run on Linux do not, and if you’re talking about those files in
the terminal you’ll need to remember to quote them as described below. If you stick with letters, numbers,
hyphens, underscores and full stops, you will be fine.
Filenames with spaces in them are a common problem when transferring files to Linux from computers
running Windows, or Mac operating systems. Normally the simplest thing is to rename the files before you
work with them.
If you want to reference filenames with spaces in them, you will need to enclose the entire filename in
quotation marks so that Linux understands that the space is part of one single name.
Alternatively, you can “escape” the space using a backslash. For example, if I have a file called
my document
Linux will see this as two words, “my” and “document”.
But you could write either of the following to make it understand you mean a single file:
“my document”
my\ document
To avoid worrying about this, a common practice is to replace the space with an underscore. For example:
mv “my document” my_document
•
Everything is case sensitive
Linux systems consider capital letters different from lower case letters. The filename myFile is not the same
as the filename Myfile or myfile. You could have all three of these in the same folder.
There are some common naming conventions in place for biological data that you should try to follow. More
is said on this in the second part of this tutorial.
Getting the prompt back when running graphical applications from the
terminal
On an earlier page the command gnome-terminal & was suggested as a way to start a new terminal, but the
ampersand symbol was not explained. By default, when you run a command the shell expects that the
command will want to display text in the terminal window so it gets out fo the way until the command is
finished. Ending a command with & tells the shell to go immediately back to the prompt, not waiting for the
command to complete. This makes most sense when you expect the command to open up a new graphical
window. It is also possible, though more fiddly, to change your mind and get the prompt back while the
command is running.
Confusingly, some graphical programs will always signal the shell to keep going even if you omit the &
from the command. To demonstrate the default behavior we can use a very simple program called xcalc.
The following exercise will hopefully help you understand how all this works.
12
Exercise – understanding the function of “&”:
1. In a terminal, type the command xcalc
1. A basic calculator should appear. Try it out.
2. Try to type another command (eg. pwd) back in your terminal window.
3. Close the xcalc window and now see what happens back in the terminal.
2. Run xcalc again and leave it running. Now we’re going to get the terminal prompt back…
1. Back at the terminal, type Ctrl-z (ie. hold down Ctrl and tap z).
2. What message do you see? Hopefully you can run commands again.
3. Try using the calculator.
4. In the terminal, give the command bg and try using the calculator again.
3. Run xcalc once again with an ampersand after the command – xcalc &
Linux shorthand and shortcuts
Understanding Linux commands can seem daunting at first. This is in part due to particular characters (full
stops, question marks, etc.) having special meaning in commands. Once you learn the basics, these shorthand
characters are extremely useful and time saving.
The following incomplete list covers the symbols you will see most often today and describes their meanings
as you will most likely encounter them in this course.
*
matches any character appearing 0 or more times, also known as a wildcard
ls mydir/*
list all the files under the directory mydir
ls cat*
list all files starting with the letters cat
ls cat*hat
list all files starting with the letters cat and ending in hat
?
matches a single character
ls cat??hat
list all files starting with the letters cat followed by any 2 letters,
and then hat
.
the directory you are currently in – ie. the last one you moved to using cd
..
the directory one level above the one you are currently in, aka. the parent directory
~
shorthand for your home directory, eg. /home/live
$var
dollar sign indicates a variable substitution, even within double quotes
– see the section on environment variables
!
used for history substitution – not covered in this course
-
often seen preceding a parameter (eg. ls -l)
also, the command cd - is a special case meaning “cd to previous directory”
;
a semicolon can be used to separate two commands on the same line;
it is also used when writing loops – see p59
More Basic Linux Commands
13
A list of common Linux commands is provided in Appendix D of this document for reference.
Changing directories
The command used to change directories is cd
If you think of your directory structure, (i.e. this set of nested file folders you are in), as a tree structure, then
the simplest directory change you can do is move into a directory directly above or below the one you are in.
To change to a directory one below you are in, just use the cd command followed by the subdirectory name:
cd subdir_name
To change directory to the one above your are in, use the shorthand for “the directory above” ..
cd ..
If you need to change directory without worrying where you are now, you could explicitly state the full path:
cd /usr/local/bin
If you wish to return to your home directory at any time, just type cd by itself.
cd
And finally, you can type
cd –
This returns you to the last directory you were working in before this one.
If you get lost and want to confirm where you are in the directory structure , use the pwd command (print
working directory). This will return the full path of the directory you are currently in. Also by default in Bio-
Linux, you see the name of the current directory you are working in as part of your prompt.
For example, when you first opened the terminal in a live session you should see the prompt:
live@biolinux[live]
This means you are logged in as the user live on the machine named biolinux, and you are in a directory
called live. (Recall that the full path of your home directory is /home/live.)
If you move into the bioinf_files directory
cd bioinf_files
you would see the prompt:
live@biolinux[bioinf_files]
14
Exercise 1-4
●
Ensure you start in your home directory by using the cd command on its own. Change directory from
your home directory to the directory bioinf_files by typing
cd bioinf_files
●
Find the full path to where you are by typing
pwd
●
Type cd bioinf_files a second time. Why doesn’t this work?
●
Change directory into the /usr/bin directory by typing
cd /usr/bin
●
List the files in this directory.
This is the main directory of runnable programs on the system.
Some bioinformatics software can be found in here. Others are in /usr/local/bin
●
How can you get back to the bioinf_files folder from here? Can you work out how to do it with a
single command?
Tab completion
Tab completion is an incredibly useful facility for working on the command line.
The main thing tab completion does is complete the filename or program name you have started typing,
saving you typing time and reducing spelling errors.
For example, from your home directory, you could type:
cd bio
and hit the tab key.
If there is only one directory with a name starting with the letters “bio”, the rest of the name will be
completed for you. Here this would give you:
cd bioinf_files
The terminal environment on Bio-Linux is set up such that if there is more than one file with that
combination of letters, all the files will be shown to you. You can choose the one you want by typing more of
the filename, or by continuing to hit the tab key multiple times.
15
Exercise 1-5
●
Return to your home directory if you are not already there by typing cd
●
Type cd bio and use tab completion for the rest of the command. Only then press the return key.
●
You will now be in the bioinf_files directory.
●
Type ls testseq and use tab completion. This will show you a list of files that start with testseq.
You now have the option of completing the filename yourself, or “tabbing” through the filenames
available.
●
Press the tab key a number of times to see what happens.
●
Type ls c and press tab once to view the files available.
●
Type a further a such that you now have ls ca on the command line.
●
Now press the tab key again.
As you get faster with this, it will save you a lot of typing effort. Also, tab completion knows how to
escape spaces and other non-standard characters in file names for you.
Exercise 1-6
In the previous exercise tab completion was finding files in the working directory, but it can also help
you find command and program names because the system knows that the first word you type is going
to be a command name.
●
Type a on the command line and then press the tab key.
●
Add rte to the a so that you now have arte on the command line. Press the tab key again.
●
You will see that there is only one command that starts with these letters: artemis
For programs that might contain case sensitive names, tab completion can be especially useful.
●
Type bl on the command line and press the tab key. You will see a number of program names listed.
●
Keep pressing the tab key to see how the filenames will cycle through on the command line.
16
Command history
Previous commands you have used are stored in your history. You can save a lot of typing by using your
command history effectively. If you use the up arrow key when you are at the prompt in your terminal, you
can see previous commands you have run. This is particularly useful if you have mistyped something and
want to edit the command without writing the whole command out again.
You can also view past commands using the command history. By default, history will return a list of the
last 15 commands run. You can add a number as a parameter to the command to ask for longer or shorter
lists. For example, to return the last 30 commands run, you would type:
history -30
It is possible to “speed search” previously-executed commands by pressing the key combination:
Ctrl-r (ie. hold down Ctrl and tap the R key)
Then start to type. The command history will be scanned and the last matching command will be displayed
on the console. Type Ctrl-r repeatedly to cycle through the entire list of matching commands.
Exercise 1-7
●
Type history -n 10 on the command line.
●
Type Ctrl-r, then start typing ist.
Making a directory
To make a new directory, use the command mkdir (make directory). For example:
mkdir newdir
would create a new directory called newdir.
Exercise 1-8
●
Start in your bioinf_files directory.
●
Make a new directory called testdir
The graphical view of your account should immediately update to show this new directory.
●
Move into the new directory testdir
●
Move straight back into the bioinf_files directory using a single command. (see the shorthand and
shortcuts section above for a hint)
17
Office software
Leaving the command line for a short while… There are a number of word processors and spreadsheet
programs available for your system. In this course we will look at the LibreOffice suite of programs,
previously known as OpenOffice. This is an open source alternative to Microsoft Office and can be run on
both Linux and Windows.
The programs within LibreOffice can be run graphically from the icons in the Dash toolbar.
Exercise 1-9
●
Click on the LibreOffice Calc Spreadsheet icon.
●
Under the File menu, click on Open.
●
Look inside the bioinf_files directory.
●
Open the file called example.xls.
●
Make a few changes and save the file using the Save or Save As… options under the File menu.
●
Close LibreOffice Calc by choosing Exit from under the File menu.
18
Text files, Word Processors and Bioinformatics
Documents written using a word processor such as
Microsoft Word or LibreOffice Write are not plain text
documents. If your filename has an extension such as
.doc or .odt, it is unlikely to be a plain text document.
(Try opening a Word document in notepad on Windows if you want proof of this.)
Word processors are very useful for preparing printed documents, but we recommend you do not use them
when working with bioinformatics data files.
There is a handy command called simply file that will inspect a file and tell you what it looks like. If you
run this on a FASTA file it will say “ASCII text” because FASTA is a plain text format. If it says "binary
data“ or ”HTML“ or ”OpenDocument Text" or whatever then this is not actually a FASTA file, even if it
resembles one when viewed in soem applications.
Word processor
Spreadsheet
Presentation editor
Figure 10: LibreOffice Applications in the dash toolbar
Using text editors
Plain text files are important, both as input to bioinformatics programs and as input or configuration files for
system programs. We highly recommend that you learn to use a text editor to prepare and edit plain text
files.
There are a number of different text editors available on Bio-Linux. These range in ease of use, and each has
its pros and cons. In this practical we will briefly look at two editors, nano and gedit.
Nano
Pros:
very simple – for example, most command
options are visible at the bottom of the
window
can be used right in the terminal without
graphical support
fast to start up and use
supports syntax hilighting
Cons:
due to simplicity, lacks some advanced
features – eg. line numbering, search by
pattern
it is not completely intuitive for people who
are used to graphical word processors
Gedit
Pros:
very easy to start using
supports syntax hilighting
looks similar to a word processor, but is in
fact a powerful text editor.
has many useful plugins that you can easily
install
Cons:
it is a graphical program and cannot be run
from a text-only environment
it is slightly slower to start up than non-
graphical editors
for real power users, it’s not a match for Vim
or Emacs
As most users will work on Bio-Linux using a graphical environment, we will only use Gedit in the exercise
for this section.
Exercise 1-10
Editing a file with Gedit
To start up Gedit, you can use the command line, or find it in the Dash menu. Choose one of the two
methods to open gedit:
Command line
Type gedit &
Graphical menu
Click the Dash Home at the top left of the screen, then type edit and click the Text Editor icon.
●
Type three or four lines of text into the gedit window.
●
Save your file using the save option under the File menu (note, you have to move your mouse right to
the top of the screen to see this) or simply click the Save button on the Toolbar. Save it as
myfirstfile.txt in your testdir directory.
19
Exercise 1-10 continued
To save a file under the testdir directory, you may have to click on the drop down arrow to Browse for
other folders. This will expand this section into a File Browser like the one you’ve seen in past exercises.
Simply browse through to the location testdir is in and click the Save button.
●
Add a new line to your file and save the file again using the Save As… option under the File menu.
Save this file as mysecondfile.txt in the testdir directory.
●
Add more functionality to gedit by choosing the menu options; Edit → Preferences. A pop-up box
will appear with 4 tabs:
View
Editor
Font & Colours
Plugins
Seeing the line numbers in a file helps to keep track of your position in that file. We will enable line
numbers here.
●
On the View tab enable Display line numbers. Now you can see the line numbers on the left.
●
Next, click on the Plugins tab and enable the Change Case and the Document Statistics plugins.
Browse around the other plugins and see what functionality they provide.
●
Under the Tools menu, click on Document Statistics.
●
Try out the other newly added plugin, by selecting a piece of text from the document you are editing
with the mouse and click on the Edit menu. Hover the mouse over the Change Case menu and choose one
of the options you are presented with.
●
Change part of one of the lines in this file and save it again using the Save As… option under the File
menu. This time save it as mythirdfile.txt in the testdir directory.
●
Quit gedit by choosing the option Quit under the File menu.
Reading text files
There are many commands available for reading text files on Linux/Unix. These are useful when you want to
look at the contents of a file, but not edit it. Among the most common of these commands are cat, more, and
less.
cat simply prints out a whole file in the terminal, which is often a very useful thing to do. However, cat
streams the entire contents of a file to your terminal at once and is thus not that useful for reading long files
as the text streams past too quickly to read. (Note – cat is short for concatenate because if you give it
multiple files it will string them together in order before printing them.)
more and less are commands that show the contents of a file one screenful at a time. less has more
functionality than more; specifically it can scroll backwards, hence the name.
With both
more and less, you
can use the space bar to scroll down the page, and typing the letter q causes the program to quit – returning
you to your command line prompt.
Once you are reading a document with more or less, typing a forward slash / will start a prompt at the
bottom of the page, and you can then type in text that is searched for below the point in the document you
were at. Typing in a ? also searches for a text string you enter, but it searches in the document above the
point you were at. Hitting the n key during a search looks for the next instance of that text in the file.
20
With less (but not more), you can use the arrow keys to scroll up and down the page, and the b key to move
back up the document if you wish to.
Exercise 1-11a
●
Move into the bioinf_files directory.
●
Read the file hsy14768.embl using the commands cat, more and less.
Don’t forget that tab completion can save you typing effort.
cat hsy14768.embl
more hsy14768.embl Use the spacebar to scroll down
Press q to quit.
less hsy14768.embl
Use the spacebar to scroll down, b to go up a page, and the up and
down arrow keys to move up and down the file line by line.
Press the / key and search for the letters sequen in the file.
Press the ? key and search for the letters gene in the file.
Press the n key to search for other instances of gene in the file.
In almost all cases, if you want to look at a file in the terminal you want to use less. The cat command is
more usually used in conjunction with other commands or when you actually want to concatenate files. The
more command does nothing that less can’t do.
An important note on line endings – CR and LF
There is one major gotcha when working with text files, and it stems from a decision made way back in the
olden days of line printers. To print a text file on such a device, you would send the raw text file directly
down the serial line to the printer and at the end of each line you sent two control codes, one to advance the
paper (line feed) and the other to move the print carriage back to the start (carriage return).
In MS-DOS, later Windows, both these codes were embedded in standard text files at the end of every line.
In UNIX, and later Linux, a single LF character is used to indicate a newline. On old Macs it was a single
LF. New Macs use the UNIX convention, so text files with single LF newlines are rare.
Many programs on Linux are written to deal with all these conventions – they just helpfully regard any
combination of CR and LF as meaning “next line”. Others are not, and will either complain the file is invalid
or worse will try to process the extra characters as meaningful data and produce nonsense results. You don’t
need this hassle so, much like we recommended removing spaces from filenames above, we also recommend
ensuring all your text files are in order before attempting any bioinformatics on them. The next exercise
shows how you might do this.
21
Remember the man pages
There are many command line options available for each of the above commands, as well as
functionality we do not cover here. To read more about them, consult the manual pages:
man cat
man less
As you’ll see, the manual pages are actually displayed for you using less.
Exercise 1-11b
●
In Gedit, open the file hexaseqs.list which is provided in bioinf_files.
●
Without editing the file, save it as a new file named hexaseqs_crlf.list but on the Save As dialog switch
the Line Ending option to Windows.
●
Try these commands in order:
○
file hexaseqs.list hexaseqs_crlf.list
○
ls -l hexaseqs.list hexaseqs_crlf.list
Note the difference in file sizes in the fourth column
○
cat hexaseqs.list
○
cat hexaseqs_crlf.list
○
cat -A hexaseqs.list
○
cat -A hexaseqs_crlf.list
●
Now run these. Remember that the * in a filename is a shorthand to match multiple files at once. Don’t
worry about the specific meaning of the sed command but do ensure you type it exactly like as shown.
○
sed -i “s/\r//” hexaseqs*.list
○
file hexaseqs*.list
In summary:
○
The line endings problem is a historical annoyance that won’t go away.
○
The file and cat -A commands are the quickest ways to detect troublesome CRLF line endings.
○
Using Gedit and saving with the Unix/Linux mode is the simplest and safest way to remove
them.
○
The command shown above using sed (sed is a handy tool but we don’t really have time to cover
it in this course) can quickly strip all the CR characters from multiple files in one go. It’s safe to
run this on any regular text file, but if you run it on, say, and Excel file or an image or a .zip or
.tar.gz file then the file will effectively be destroyed.
Copying files
The basic command used to copy files using the command line is cp. At a minimum, you must specify two
arguments: the name of the file to be copied, and where you wish to copy the file to.
The main things to know about using the cp command are:
•
if you provide the name of an existing directory as the second argument, the file named in the first
argument will be copied into that directory.
•
otherwise, it will be assumed that the second argument is the new name to be used for the copy you
are making, whether the name corresponds to an existing file or not
•
if you provide more than two arguments to cp, the final argument needs to be the name of a directory
that already exists and all the preceding arguments need to be files that will be copied to the
directory
Examples (try these in the bioinf_files folder if you like, or go straight on to 1-12):
cp unknown.fasta my_new_file.fasta - clones unknown.fasta with the new name my_new_file.fasta
22
cp unknown.fasta my_new_directory - probably not what you wanted! It just makes another file.
mkdir an_actual_directory
cp unknown.fasta an_actual_directory - copy unknown.fasta into an_actual_directory you just made
cp *.embl an_actual_directory - copy all the .embl files into the new directory in one go
To copy whole directories, with all the subfiles and subdirectories, use the –R option, (meaning recursive).
cp –R an_actual_directory foo - copy directory and its contents as a new directory, foo
The Linux shorthand for “this directory right here” (a dot . ) and “the parent directory” ( .. ) comes in handy
when copying:
cd foo
cp –R ../blastdb .
copy blastdb from the directory above and put the copy here in foo
Make sure you leave a space between the directory name and the final dot.
Also useful is the shorthand for someone’s home account. e.g. instead of having to know and type the
location of their account, you can use ~username In the case of your own account, you use just the ~
symbol, followed by a / if you want to specify any subdirectories in your account.
(note the next two examples don’t work on the demo system as the files are not in place)
cp ~user2/somefile .
copy the file somefile from user2’s home directory to my
current working directory. Note that you need the appropriate
permissions to do this!
cp ~/Documents/mytext . copy the file or directory called mytext from within my Documents
directory to my current working directory.
Exercise 1-12
●
Move into your directory testdir from exercise 1-8.
●
List the files in this directory.
●
Make a copy of myfirstfile.txt called test.txt
●
Make a copy of mythirdfile.txt called myfourthfile.txt.
●
Make a directory called subdir.
●
Copy mysecondfile.txt into subdir
●
Copy all the files that have the letters fil in the name into the subdir directory.
●
Move back into the bioinf_files directory
●
Copy all the files that start with the letters tes and end in .embl into the directory subdir.
Linking to files
Sometimes you want to access a file or directory at a different location but you don’t actually want to copy it.
For example if you have a data file in a system folder or network drive that you want to be able to access
quickly from your desktop, but you don’t actually want the entire file to be copied to your desktop folder:
23
ln -s /usr/local/bioinf/sampledata/nucleotide_seqs/multiple_seqs.fasta ~/Desktop/multiple.fasta
If you now try to open multiple.fasta in any application (eg. Gedit), you will see the data from the linked file
as if you accessed it directly. If you write to the link you will be writing data straight to the original file (but
in this case you will not have permission to do so).
You can examine links using the long output mode of ls.
ls -l ~/Desktop/multiple.fasta
lrwxrwxrwx 1 live live 35 2011-05-12 11:46
/home/live/Desktop/multiple.fasta ->
/usr/local/bioinf/sampledata/nucleotide_seqs/file1.fasta
The initial letter ’l’ shows we are dealing with a link. Links do not have their own permission settings so ls
shows them all as enabled, but links do have an owner depending on who created them. The target of the
link is shown last. The target can be any file, directory or even another link. Note that Linux will not stop
you from making a link where the target is non-existent or inaccessible, but ls will help you to spot these
“dangling links” by colouring them in red.
Removing files and directories
The key difference between deleting something from the command line and using the graphical file browser
is that in the first case the file vanishes immediately, but in the second it will be stored for a while in the
Rubbish Bin and can be retrieved.
Option 1: Using the command line (effect: deletes files from the system)
To remove a file or files, use the rm command followed by the name of the file(s) you wish to delete.
rm file1
rm file2 file3 file4
rm foo/*
remove all files in foo but not the directory itself
To remove an empty directory, you can use the rmdir command:
rmdir thisdir
If that directory contains any files, you will not able to delete the directory using rmdir until you have
deleted all the files within it. To delete a directory and all the files in it at the same time, use the rm
command with the option -r (for recursive)
rm –r fulldir
If you use the above command on Bio-Linux, you will be prompted to confirm that you wish to delete each
file. While sometimes useful, this can be tedious. If you are certain that you want to delete all the files in that
directory, as well as the directory itself, then you can combine the recursive flag with the force (-f) flag
rm -rf anydir
So if you are 100% confident that you will never make a mistake, you can use rm -rf for all deletions, but
for mere mortals it is good practice to use the more specific commands, as this can mitigate mistakes.
Option 2: Using the File Browser (effect: moves files into the Rubbish Bin)
If you are in the graphical file browser, just find the file you wish to remove, right click on it and choose the
Move to Rubbish Bin option or else press the Delete key on the keyboard. Note that this file will not be
24
removed from your system, only hidden, and can be retrieved via the Rubbish Bin icon in the bottom right of
the screen.
If you were deleting the file to make space, you now have to empty it from the Rubbish Bin to actually get
the disk space back. You can remove the file permanently in one go by holding down the Shift key on your
keyboard and while keeping this key depressed, pressing the Delete key. A message box will pop up asking
you to confirm that you really wish to permanently delete your file.
Exercise 1-13
●
Move into the testdir directory.
●
Delete mythirdfile.txt using the command line
●
Delete myfourthfile.txt using the graphical file browser. Is the files now sitting in the Rubbish Bin?
●
Back on the command line, move back into your Home directory.
●
Then delete myfirstfile.txt from testdir without moving back to the testdir directory.
●
Delete the entire testdir/subdir directory without being prompted about the deletion of each file
individually.
Redirecting output to files
You have seen how the cat command can take the contents of a file and put it straight into the terminal, but
we can also do what is essentially the opposite and capture output that would normally go to the terminal and
put it in a file. This is done by the redirection operator >. For example:
ls > file_list.txt
In this case the output of ls will not appear on the screen but you will see a new file called file_list.txt. If
you cat this file or open it in gedit you’ll see the file list. Note that the result is no longer coloured, as there
is no way to represent colour information in a plain text file, and has been formatted into a single column list,
but otherwise is identical.
25
Notes on Reading, Copying and Removing Files and Directories
On Bio-Linux the commands cp, mv and rm have been aliased to cp –i , mv –i and rm –i respectively.
This means the system will ask you if you really mean to overwrite files should the situation arise with cp or
mv, or delete the file you have just asked to delete when using rm. You must respond with a y or Y if you do
wish to proceed. Hitting any other key will cause the action you requested to be ignored.
You cannot assume that any other Linux/Unix systems you work on will be configured this way, but you can
always set these settings yourself.
Piping output between applications
A remarkably powerful facility on the Linux command line is the ability to take the output of one command
and use it directly as the input to another command. This is referred to as piping the output of one command
into another command.
The vertical bar symbol used for this is called a pipe and looks like: |
Standard UK PC keyboards have the pipe symbol on the same key as the backslash symbol, at the bottom,
left hand side of the keyboard. So pressing the Shift key and the backslash key together will give you the
pipe symbol.
On some keyboards, the pipe symbol is at the top left hand side, on the same key as the backtick. To type a
pipe symbol on such keyboards, hold down the key Alt Gr and hit the back tick ( ` ) key (left of the number
1 key).
An example of when you want to use a pipe would be if you wanted to list all the files in a directory, but
there are too many to fit on a single page. You probably saw this when you listed the contents of /usr/bin
back in Ex. 1-4.
You can pipe the output of the ls command (a list of files) into the less command, which will allow you to
view the list page by page. To list the files in /usr/bin and view them page by page, the command would be:
ls /usr/bin | less
Another useful command to use with pipes is the wc command, which stands for wordcount. By default, wc
returns the number of newlines, words and bytes in a file. Or you can tell wc to return just the number of
lines by using the -l parameter (see the manpage for wc).
For example, you could find out how many files you had in a directory by typing:
ls | wc -l
26
Diff, Grep and Sort
In this section, we look briefly at three very useful commands: diff, grep and sort. As with all the commands
covered today, we recommend that you read the manual page for more information about how these work
and what options are available.
Diff
diff compares files line by line and reports the differences between the files. In fact, diff can be used for
more involved tasks as well, like comparing the contents of directories. This can be very useful when you are
looking for changes that you or someone else has made.
Exercise 1-14
●
Move into the testdir directory.
●
Type diff test.txt mysecondfile.txt to see what diff reports to you.
●
Type cat mysecondfile.txt | diff - test.txt
In the above command the hyphen (-) refers to the information being given to diff through the pipe. That is,
the information resulting from the command cat mysecondfile.txt is put directly into the diff command.
Obviously, in this instance it would be easier just to give the name of the file, mysecondfile.txt, but there
are many instances where being able to use – to mean “what I am sending in via the pipe” can be useful.
Grep
grep stands for global regular expression print; you use this command to search for text patterns in a file
(or any stream of text). Eg try this.
grep “adge” /usr/share/dict/words
You can also use flexible search terms, known as regular expressions, in your grep searches. You have
already used glob pattern expressions in this practical, but regular expressions are somewhat different and
more powerful. For example, when you listed all files with the pattern tes*embl* you were using a glob
pattern comprising explicit characters (e.g. tes) and special symbols (* meaning any character or characters).
The equivalent in grep would be “tes.*embl.*” where the period signifies any single character and the *
signifies any number of repeats.
Therefore to convert from a shell glob pattern to a regular expression replace each * with .* and each ? with .
. You also need to enclose the expression in quotes to tell the shell not to try and interpret it as a glob.
Unmodified glob patterns fed to grep but will not work as intended. For example the pattern tes* in grep
means te followed by any number of s characters in sequence (te, tes, tess, tesss, …). The question mark
now signifies optionality – so tes? means te followed by zero or one s character (te, tes). Regular
expressions are found in several places other than grep, most notably in the Perl scripting language. The full
syntax is extensive and powerful but is beyond the scope of this course, so back to the grep command itself…
grep requires a regular expression pattern as a parameter, and prints all the lines in a file containing that
pattern.
grep is especially useful in combination with pipes as you can filter the results of other commands.
For example, perhaps you only want to see only the information in an EMBL file relating to the origin of the
sequence, that is, the DE line. You do not need to search the file in an editor, you can just grep for lines
beginning in DE, as in the next exercise.
27
Exercise 1-15
●
While in the bioinf_files directory, type the command: grep “DE” hsy14768.embl
What is this command doing?
Can you see why the above command results in the output you see?
An explanation of this command can be found below this exercise box.
●
Try the commands: grep “^DE” hsy14768.embl and grep -x “DE.*” hsy14768.embl
What are the ^ symbol and the -x parameter in these commands doing?
Check the manpage for grep to be sure.
●
Try the command: cat hsy14768.embl | grep “^DE”. Does that do what you expected?
●
Move to your home directory and type ls –lR
Read the manual page for ls if it is not clear what this command returns.
●
Use the above command with a pipe and a grep command to search for files created or
modified today.
●
List the files in the bioinf_files directory and use the grep command to look for those containing the
characters d4.
The first command in the previous exercise searches all the text in the hsy14768.embl file and returns the
lines in which it finds the letter D followed by the letter E.
The second command in the exercise also returns lines in the file that have a letter D followed by a letter E,
but only where DE is found at the beginning of a line. This is because the ^ symbol means “match at the
beginning of a line”. The $ symbol can be used similarly to mean “at the end of a line”. These are known as
anchors. Passing the -x flag to grep tells it to automatically anchor both ends of the search pattern.
What this anchoring does in the example above is return to you just the organism information in the embl
file. This is because none of the other lines returned in the previous command started with DE, they just
contained DE somewhere in them. This is an example where knowing how information is stored in an given
file, along with a few basic Linux commands, allows you to retrieve information quickly.
Another common example is counting how many sequences are in a set of multi-fasta files. We can do this
with pipes between the commands cat, grep and the ever-handy wc, which here we use to count lines found
by grep.
cat *seqs.fasta | grep “^>” | wc -l
Each sequence in a fasta file starts with a header line that begins with a > . The above command streams the
contents of all files matching the glob pattern *seqs.fasta through a search with grep looking for lines that
start with the symbol > . The quotes around the pattern ^> are necessary, as otherwise it is interpreted as a
request for redirection of output to a file, rather than as a character to look for. As before, the ^ symbol
means “match only at the beginning of the line”.
The output of this grep search is sent to the wc command, with the -l indicating that you want to know the
number of lines – ie. the number of headers and by implication the number of sequences.
So a synopsis of the command above is: Read through all files with names ending seqs.fasta and look for all
the header lines in the combined output, then count up those lines that matched and return the number to
screen.
We cover sequence formats later on in part 2 of the tutorial.
28
Environment Variables
We have seen that the way commands run can be modified by the options passed on the command line.
Some commands also read values called environment variables which affect their behaviour. Environmental
variables are set within the shell via the export command and are passed to any processes you run. This is
useful when you want to set some parameter that is common to all invocations of a command, or applies
across several commands. For example, your favourite text editor may be, say, Gedit, or Nano, or Vim, or
Emacs. In the shell you can say:
export EDITOR=vim
Now any command that wants to run a text editor knows what your preferred editor is. Within the shell you
can get at the current value of en environment variable by prefixing it with a $ sign, eg.
echo $EDITOR
prints the current value of the EDITOR environment variable to the screen
The printenv command dumps all environment variables. Note that environment variables are only set in
the current shell and are not saved by default, so if you run a command in another terminal or close and
restart the terminal any values you set will be lost. For information on making the settings permanent by
editing your .zshrc file see the user guide under Supported Shells.
Exercise 1-16
•
Give the command: export VAR1=hello (with no spaces around the = sign) then:
◦
echo $VAR1
◦
echo $ VAR1
◦
echo “$VAR1”
◦
echo ’$VAR1’
•
Start a new terminal window by typing: gnome-terminal &
◦
Within this new terminal: echo $VAR1
•
Start a second new terminal by right-clicking the icon in the Dash and selecting New Terminal
◦
Within this new shell: echo $VAR1
•
Go back to the original shell window
◦
unset VAR1
◦
echo $VAR1
•
Has this affected either of the other two shells you started? Check them:
◦
echo $VAR1
Environment variables are inherited when one process starts another, much like genetic material is inherited
when a cell divides. Hopefully this explains the behaviour you see in the exercise above. When you start a
terminal from en existing shell it inherits the environment from that shell. When you start one from the
system menu it inherits just the base system environment. Furthermore, once a program is running no
external program can modify its environment variables.
29
Changing permissions on files and directories
Every file on the system has a set of permissions on it that dictate who on the system can read, change or
delete, or execute the file. By default, all the files you create in your account are readable, changeable or
executable by you. However, you can grant other users permissions to access parts of your account if you
wish.
Below is some basic information about file permissions. Since there is only one user on the live system this
isn’t really relevant to your current setup. If you are working on a shared system and want to set up access to
your files for other people on the system, please get advice from your system administrator.
The command to change permissions is chmod. You have to specify who you are modifying the permissions
of, what the new permissions are, and what file or directory to act on.
The format of the chmod command is:
chmod who ± permissions filename(s)
who can be:
u
means user and refers to the owner of the file
g
means group, and refers to the group the file belongs to
o
means others, everyone on your systems apart from those above
a
means all three, i.e. user, group and others
permissions can be:
r
means read permission
w
means write permission
x
means execute permission
Each user has a default group and possibly extra group memberships. Use the id command to view your
group memberships. When you create a new file it will be owned by you and by your default group. If you
are a member of additional groups, you can switch the file to any of those groups using the chgrp command.
(Please refer to the manual pages for the commands chown, chgrp and chmod for more on this topic.)
For simplicity, let us assume that you and a co-worker have both been put in the default group labusers and
wish to share your data files found in ~/bioinf_files.
chmod a+x ~
give permission to anyone to execute, in this case, so
that they can move through, your home directory.
chmod g+rx ~/bioinf_files
give permission to people in the group to access files in the
bioinf_files directory under your home directory, including
listing the files with ls
chmod g+r ~/bioinf_files/*
give permission to people in the group to read the files in the
directory
The first command could have been “chmod g+x ~”. This would unlock your home directory only to users
in the labusers group. However, enabling access for anyone is generally safe, as long as permissions on the
files and subfolders prevent anyone from actually accessing them, and unless you set a+w in addition to a+x
nobody but you will be able to list the files in your home directory.
30
Some other useful information
Copying and pasting text
Most Linux applications, including the shell terminal windows, have Copy and Paste options in the Edit
menu or available in the pop-up menu when you click the right mouse button. You can copy text within
the application or between different applications. There is also a quick way to copy text within the
terminal by highlighting text to select it, and using the middle mouse button to paste the text.
The exact way to select, copy and paste text from within a terminal windows depends on how your mouse
has been set up. Normally you would highlight text by dragging the mouse across it with your left mouse
button depressed to copy the text, and paste by clicking the middle mouse button (or the two outer mouse
buttons pressed simultaneously). Note that within the terminal it doesn’t matter where you click the middle
mouse button – the text will always be inserted at the current cursor position.
The simple way to stop a process
Sometimes a command or program you run in the terminal goes on too long, or is obviously doing something
you did not plan. If there is no obvious way (such as a menu option or button) to stop the program running,
try using Control and c (more commonly written as Ctrl-c). i.e. hold down the Control key and hit the c
key. This requests the program to stop immediately, though the program may ignore the request.
Note that this is the same key combination used in most graphical applications for copying text. Remember
that highlighting text in a Linux terminal automatically copies it into the buffer – you don’t need to press
Ctrl-c before pasting with the middle button.
Putting a command to one side
Sometimes, you are in the middle of typing a long command, and you suddenly realise you need to do
something else in the terminal, like list the current directory contents or check the manpage, before you run
the command. Z-shell provides a handy shortcut for this: Alt-q. When you press Alt-q the current
command disappears and you have a new empty prompt, but the unfinished command has been remembered
and will reappear with the next prompt ready for you to edit and run it.
An alternative is to hit Ctrl-c. Within the shell, Ctrl-c does not cause the shell to exit but it does cause the
current command to be abandoned and a fresh prompt to appear. Unlike with Alt-q the unfinished command
will still be visible in the terminal display so you can select it and paste it back in with the middle button if
you decide you want it after all. (Try it!)
Logging out of a session
To logout, you can press the' Power Icon on the far right of the top taskbar (Figure 2) and choose the Log
Out option.
To shut down the machine, you can choose the Shut Down option on the same menu. If you are working on
the console of a machine with users apart from you, then please check with your system administrator before
powering down the machine. Other people might want to log in remotely.
Clearing your terminal of text
Your terminal windows can fill up with lots of text, and it can become difficult to see the information you
want because of all the clutter. You can clear the terminal window by typing
clear
31
Accessing a running program or working with others interactively
If you just run a job and then close down the terminal you ran it from, normally the job will be terminated. It
would be nice to be able to leave a long job running and be able to log out and then log back in again to see
how it is progressing. This is especially true if you log in remotely via SSH and experience network
disruptions, or if you run programs that can take quite a long time, but ask you for input periodically.
Luckily, there is a tool that makes it possible to leave programs running with no danger of them terminating
if you log off or your terminal is closed. In addition, when you log back into your system, either locally or
remotely, you can “re-attach” to your earlier session so it feels like you are picking up where you left off, in
the same window you were running your program from.
The utility that allows you to do this is called screen. It must be run before you start running other programs
in your window. Screen can also allow two people on different machines to work in the same session – i.e.
Real time collaborative editing is possible with screen.
Unfortunately, how to work with screen is beyond the scope of this course. However, the link below provides
a useful beginners tutorial about screen and multi-user sessions:
https://www.linode.com/docs/networking/ssh/using-gnu-screen-to-manage-persistent-terminal-
An extensive list of command options can be found in the screen manpage (ie. type man screen).
Accessing your machine – including a full graphical desktop - remotely
Bio-Linux is set up for secure remote access. We can’t demonstrate this on the Live system but it is well
worth knowing that if you have an installed Bio-Linux system you can connect to it securely over the
network, so long as your account is enabled in the ssh group and you have network access to the machine (ie.
not blocked by a site firewall)
You can connect to your (installed) Bio-Linux system remotely using X2Go software. If you download an
X2Go client to another Windows, Linux or Mac system, you can connect to an installed Bio-Linux system
and run a full, graphical, desktop session remotely. Further details on how to do this can be found on the
website at:
http://environmentalomics.org/bio-linux-remote-access
Note that due to limitations of the remote protocol, X2Go will use a fallback desktop “MATE” session which
is slightly different to the default “Unity” desktop environment described in this tutorial.
32
There are many useful commands available on Linux and we cannot begin to cover them in this course. We
recommend that you consider buying a book to help you learn how to use Linux efficiently.
Part Two: Introduction to Bioinformatics on Bio-Linux
This section of the tutorial introduces you to running bioinformatics software on Bio-Linux, including how
to find out what is available for particular types of bioinformatics tasks, some options you have for running
programs on the system, and where to find documentation about the software on the system. This course
does not cover the detailed use or understanding of any particular piece of software.
You should read through the general information in the next few pages, then look at which specific programs
are of most interest to you.
The main points we hope you take away after completing this section of the tutorial are:
a) You can discover and run bioinformatics tools even if you have not explicitly been taught
how to use them.
b) If you have repetitive tasks to carry out, chances are there are ways of fully or partially
automating them.
c) Web interfaces are easy, and have certain benefits, but a competence with the command line
gives you access to more possibilities and sometimes these will suit your needs better.
Documentation and Help for Bioinformatics Software on Bio-Linux
There are a number of sources of information about the bioinformatics software on Bio-Linux, including
●
Bio-Linux bioinformatics documentation
●
local copies of software documentation – look in /usr/share/doc
●
options under the help menus in some graphical programs
●
web pages
●
journal articles.
Bio-Linux Bioinformatics Documentation
Categorised information about bioinformatics software on the Bio-Linux system can be accessed via the
Bioinformatics Docs icon on the left hand side of your desktop. Software can be listed by name or by
functional category.
The information for each program includes an overview of what it does, with links to local documentation
when available, as well as links to information on the internet.
An apology – the Bioinformatics Docs are currently (in 2014) out-of-date and in severe need of
attention. The plan is to integrate this catalogue with the ELIXIR tools registry but this work will
take many months to complete.
This notwithstanding, we highly recommend that you read the documentation for any programs
you intend to run.
This is especially important for programs that use heuristic algorithms (methods involving some
level of approximation, such as BLAST), and those that output numerical results.
33
Exercise 2-1
●
Click on the Bio-Linux Documentation icon on the desktop, then on Bioinformatics Docs
●
Select a category under the Browse by Category section.
●
Click on the names of any of the programs that might interest you and view the information
in the resulting web page.
●
Return to the search form and click on the link to List all categories. This shows a view of
all the documented software according to the functional category (or categories) they are listed
in.
Please refer to the bioinformatics documentation throughout this tutorial to find out more about the
programs introduced, or look on-line. Most current software will have web pages and online resources
for users. For example QIIME has a very active user community.
If you know of a good information resource for a program on Bio-Linux that is not mentioned in our
bioinformatics documentation system, or you have any problems with the system, please let us know by
emailing us at[6]
Help Functions within the Programs
Documentation is available from within many programs. For example, many graphical programs have a Help
menu or button; many command line programs provide help if you type the name of the program followed
by –h, –help or –help. Some programs even have their own manual pages that can be accessed by typing
man followed by the program name.
Example data for this tutorial
The sequences referred to in this tutorial can be unpacked from the file
usr/local/bioinf/documentation/bio-linux/intro_course/bioinf_files.tar.gz.
If you have just done the associated Introduction to Linux tutorial, you will already have these files – please
move on to the next section of the tutorial.
If you have joined the tutorial at this point, please refer to Exercise 1-1, parts b, c and d to download and
unpack the necessary sample data files.
For some parts you will also need qiime_tutorial_data.tar.gz, mothur_tutorial_data.tar.gz and
assembly_taster.tar.xz which are available in the same directory.
34
Interface choices
Software can be run on the command line, via graphical programs on your computer, via web interfaces, via
web services and/or via scripts. Bioinformatics programs can often be run using more than one of these
options. Each type of interface has pros and cons. We have summarised some of these for reference below.
Interface
Pros
Cons
Command line
Type out the command
and press enter
Fast to run once you know the program
Very flexible; usually many options
Repetitive tasks are easy to run or automate
Easy to log in remotely and carry out tasks
Have to learn the syntax
Have to find out what options are available
Prompted command
line
Type out the command
and respond to
prompts on screen
Easy to run; don’t have to remember the
command line syntax
Easy to log in remotely and carry out tasks
Easy to forget the diversity of options for a
program because of the temptation to just
reply to prompts provided
Slower to get running than “pure” command
line
Graphical interface
Start the program and
interact via menus
Often more intuitive and visually pleasing
than the command line
Extensive help is often available via a menu
option or button
Some programs (not all!) can be run by
clicking an icon in the Applications |
Bioinformatics menu on your system.
Appropriate for visual tasks such as
alignment editing, detailed annotation
checking, etc.
Can be slower to use than the command line,
especially for repetitive tasks
For some programs, the command line
version provides more functionality.
You may need your system admin to set up
programs so that you can run graphical
programs when logging in remotely
Web interface
Run via a web browser
window, usually at a
remote site
Usually intuitive
Can provide functionality not available via
locally-run programs such as access to
important data resources or results presented
in useful formats, e.g. including links to
related data resources, graphics, etc.
Some websites allow a certain degree of
“pipelining”, where the outputs of one
program can intuitively be supplied as input
to another.
Can be slow to use relative to the command
line, especially for repetitive tasks
You are subject to the rules and restrictions
of the site you are working on (e.g. data
volume, number of tasks, options available,
etc.)
You may not want to send private data over
the internet (e.g. if you are applying for a
patent?)
You can be subject to the whims of network
connectivity
35
Web services
Runs tasks over the
internet from a
program, usually
locally installed or run
via java webstart.
Can bring together the ease of a locally run
program with the data and computing
resources of a remote site
Can be used via graphical programs or scripts
You are dependent on network connectivity
You are dependent on the consistency of the
remote server where the functions you need
are running
You are dependent on the functionality the
remote site offers; this may not be as
extensive as the functionality you get locally
for some programs.
Scripts
Using a small
program that runs a
program or programs
for you
Very flexible
Great for automating tasks
Great for carrying out customised tasks
Straightforward to learn enough to alter
existing scripts to do exactly the task you
want.
You have to write the script or find a script
that does the job. This means learning a
programming language (or asking someone
who knows one to help you)
General points about working with bioinformatics programs
Sequence formats
A simple thing that often trips people up is sequence formats. There are many different sequence formats;
the reasons for this are both historical and functional.
Historically, when people first started writing analysis programs for molecular data, they designed a format
that they felt suited their needs. As time went on, numerous formats came into existence. We live with the
legacy of this. We must know what format our data is in, and whether the program we want to run can use
data in that format.
Functionally, a program may require information that can be included with data held in certain formats, but
not others. For example, EMBL format files can, in addition to the sequence data itself, contain descriptive
information about a sequence, such as its features. In contrast, plain format contains nothing inside the file
except the sequence data, while FASTA format allows a small amount of information about a sequence to be
given in a header line and FASTQ adds read quality information alongside the sequence. Clustal and msf
formats handle multiple aligned sequences, while phylip and nexus format files contain aligned sequences as
well as information relevant to phylogenetic analysis programs.
36
For repetitive tasks, we highly recommend the use of the command line, workflow software and/or scripting.
To analyse data, it must be presented to the analysis program in a format the progam
understands.
This seems obvious, but frequent errors (or worse, misleading results) occur when the data entered into
a program is not appropriate.
Converting files to different sequence formats used to be a frequent, and often time consuming, task in
bioinformatics. Luckily there are file conversion programs that take care of this easily for many formats. In
addition, many program understand more than one format.
Some common bioinformatics sequence formats, along with common filename conventions used for those
formats, are listed in the table that follows the next section.
We recommend the following page for more information and examples of common bioinformatics file
formats:
http://www.molecularevolution.org/resources/fileformats
File naming conventions in bioinformatics
The suffix, (the part of the filename after the final dot), is often used to denote to you, and other people, what
the format of the data inside the file is.
For example, the common suffix for clustal formatted alignments is aln. .A bioinformatics file that ends in
.aln is usually assumed to be a clustal formatted alignment file.
Another multiple sequence alignment format is phylip. A common suffix used on files containing sequences
in phylip format is phy.
Common suffices used for files containing data in particular formats are listed in the table following this
section. We highly recommend that you follow conventions when naming your data files.
Benefits to following the convention for filename endings include:
●
You will know your data format just by looking at the name of the file.
●
Following standard conventions, (rather than making up your own naming system), makes it
easier for other people looking at your files, (e.g. collaborators, or people helping you); they will
know the data format just by looking at the name.
●
Some graphical programs have filters set so that only files with particular suffices will be
listed in the file browser window when you try to load some data. If you use conventional
filename endings, this is less likely to cause problems for you.
Certain programs use information in the filename to interpret aspects of the data, (not just the data format).
Such programs have strict naming conventions for the whole filename. For example, some sequence
assembly programs either require, or are benefited by, defined naming schemes for sequence traces. The
filename will inform them about which sequences are read pairs, what direction sequence reads are in, and
other information relevant to assembly or visualisation. You will need to read the program documentation to
find out what is required in such instances.
37
You are not restricted to naming your files in any particular way but we highly recommend that you
follow the convention for the type of file you are generating/saving.
Following file naming conventions from the beginning will save you, and your collaborators,
a lot of time!
Common bioinformatics file formats
Format
Some common
filename endings
Comments
Embl or
swissprot
.dat
.embl
.sprot
.swiss
Usually these files, along with genbank files, contain feature information
as well as sequence.
Embl and Swisprot (or Uniprot) format are the same. Embl files contains
nucleotide sequences and Uniprot files contain peptide sequences.
Files downloaded from EMBL or Uniprot websites use the suffix .dat.
Often these are compressed with gzip, and so end in .dat.gz
Files generated by individuals in embl format will tend to end in .embl.
Genbank
.seq
.gb
.genbank
These files, along with embl and swissprot files, usually contain feature
information as well as sequence.
Individuals using this format, usually use the .gb or .genbank suffix. The
NCBI usually uses .seq for genbank sections.
FASTA
.fasta
.fsa
.fa
Possibly the most common sequence format.
It may contain nucleotide or peptide sequence(s) and a single-line header
per sequence.
FASTQ
.fastq
.fq
Very common for NextGen reads. Like FASTA with extra quality info
per sequence.
Alternative extensions may indicate the type of sequencing technology
- .fastqsanger, .fastqsolexa, etc.
Plain
.pln
.staden
.sdn
Not commonly used, as the file contents contain nothing but the sequence
itself; the only identifier of the sequence is in the filename.
Staden programs use the plain format, accounting for the last two of the
file suffices given.
Clustal
.aln
Multiple sequence alignment format
Originally from the clustalw program, but now recognised by many
programs that accept or output multiple sequence alignments.
Phylip
.phy
.phylip
Multiple sequence alignment format
Used by the Phylip suite of programs and many others, especially those
associated with phylogenetic analysis.
Msf
.msf
Multiple sequence alignment format
This was the standard output format from some of the suite of programs
called GCG. The format is still sometimes used.
Other multiple alignment formats are more generally used and thus are
often a better option to choose if you have a choice.
Nexus
.nxs
.nex
Multiple sequence alignment format
Used by a number of phylogenetics programs.
GFF
.gff
A format for describing genes and other features associated with DNA,
RNA and Protein sequences. Not generally used as input for analyses.
38
Naming files and the danger of over-writing previous results
Many programs will suggest a name for your results file. Sometimes this name is generated by taking the
beginning of the name of your input file, and adding a new suffix. However, sometimes it is just a generic
name like prettyplot.ps or clustalw.aln. We encourage you to change generic names to something
meaningful.
Apart from the fact that filenames like prettyplot.ps give you little idea what is in the file, if you do not
change the name, the next time a file of the same name is generated, you will overwrite previous results.
A common problem: what is a text file and what is not
If you didn’t work through the section on text files in part 1 we suggest you do so now. This part reiterates
the key points.
Sequence data are usually stored in text or binary files. Text files contain data you can look at in a text editor.
Binary files are not human readable. The file formats referred to in the table above are all text formats.
Examples of binary formats include ABI sequences and SFF sequence files.
Word documents may look like text, but they aren’t. The letters you see on the page of a Word document
(or OpenOffice Write, or other word processing programs) are stored along with layout data in a binary
format.
Most sequence analysis programs expect text. Plain old, nothing fancy, text.
It is an unusual situation to need to use sequence data that has been stored as a Word document (if it is not
unusual to you, you are probably doing things the hard way!). To get a text document when using Word,
save it as text only.
39
Rule of thumb
If you are using Word or any other word processing program at any stage your work with sequences, then it is
very likely that your life could be made a lot easier.
Please seek advice about other ways to handle your data. You will almost certainly save yourself time and
frustration. Honest.
Exercise 2-2a
A useful Linux command to find out what type of file you are dealing with is file. This does not
look at the filename but interrogates the file contents directly.
●
In your bioinf_files directory is the file example.xls. Move into your bioinf_files directory
if you are not already there and try running the command
file example.xls
●
In the bioinf_files directory is a file called testseq1.embl. Try running the command
file testseq1.embl
GZipped files in bioinformatics
gzip is a simple compression program, which you met right at the start of this course when you unpacked a
.tar.gz file. Any file can be compressed with gzip and .fastq.gz is now particularly popular as it saves a lot of
disk space. Some programs deal with .fastq.gz files directly, but for others you have to gunzip them first.
You can unpack the file on disk or use pipe syntax to feed it directly to your application. The zcat command
prints out the uncompressed contents of a gzipped file, so something like
zcat some_file.fastq.gz | some_app -
will work in many situations. Remember that the “–” by convention tells the application to process the data
received via the pipe. This way you never have to store the big uncompressed file on disk.
bzip2 and xz are similar compression programs. The tools bunzip2/bzcat and unxz/xzcat are provided to
unpack these files from the command line, but if in doubt just click on the file in the File Browser. The
graphical File Roller application will know how to unpack these and more file types.
40
Examples of running bioinformatics programs on Bio-Linux
Analysing sequences with QIIME
QIIME (pronounced ‘chime’) is a pipeline for performing microbial community analysis that
integrates many third party tools which have become standard in the field. QIIME can run on a
laptop, a supercomputer, and systems in between such as multicore desktops. QIIME is now
included in the standard Bio-Linux distribution.
As an example, we will use data from a study of the response of mouse gut microbial communities
to fasting (Crawford et al., 2009). To make this tutorial run quickly on a personal computer, we will
use a subset of the data generated from 5 animals kept on the control ad libitum fed diet, and 4
animals fasted for 24 hours before sacrifice. At the end of our tutorial, we will be able to compare
the community structure of control vs. fasted animals. In particular, we will be able to compare
taxonomic profiles for each sample type, differences in diversity metrics within the samples and
between the groups, and perform comparative clustering analysis to look for overall differences in
the samples.
To process our data, we will perform the following steps, each of which is described in more detail
in the Data Analysis Steps:
Filter the sequence reads for quality and assign multiplexed reads to starting samples by
nucleotide barcode.
Pick Operational Taxonomic Units (OTUs) based on sequence similarity within the reads, and
pick a representative sequence from each OTU.
Assign the OTU to a taxonomic identity using reference databases.
Align the OTU sequences and create a phylogenetic tree.
Calculate diversity metrics for each sample and compare the types of communities, using the
taxonomic and phylogenetic assignments.
Generate UPGMA and PCoA plots to visually depict the differences between the samples, and
dynamically work with these graphs to generate publication quality figures.
What follows is a streamlined version of the exemplary tutorial provided by QIIME (which can be
found at[7]
http://qiime.sourceforge.net/tutorials/tutorial.html
). Further details and parameters on the
below commands and many more can be found at this site.
The material was compiled and adapted by Daniel Pass, School of Biosciences, University of
Cardiff, for Bio-Linux courses June 2011. Editorialised for QIIME 1.6 by Tim Booth, NEBC.
QIIME allows analysis of high-throughput community sequencing data
J Gregory Caporaso, Justin Kuczynski, Jesse Stombaugh, Kyle Bittinger, Frederic D Bushman,
Elizabeth K Costello, Noah Fierer, Antonio Gonzalez Pena, Julia K Goodrich, Jeffrey I Gordon,
Gavin A Huttley, Scott T Kelley, Dan Knights, Jeremy E Koenig, Ruth E Ley, Catherine A Lozupone,
Daniel McDonald, Brian D Muegge, Meg Pirrung, Jens Reeder, Joel R Sevinsky, Peter J
Turnbaugh, William A Walters, Jeremy Widmann, Tanya Yatsunenko, Jesse Zaneveld and Rob
Knight; Nature Methods, 2010; doi:10.1038/nmeth.f.303
41
Note: Commands to type are shown in grey boxes like this. Some commands in QIIME are too
long to print on one line, so where you see , you need to continue typing the command on the
same line.
Preparation
First, we must copy the tutorial data to your home directory and extract it:
cd
tar -xvzf /usr/local/bioinf/documentation/bio-linux/intro_course/qiime_tutorial_data.tar.gz
Entering the directory (cd qiime_tutorial_data) and listing the files (ls) will show what was
extracted:
Sequences (.fna)
This is the 454-machine generated FASTA file.
Quality Scores (.qual)
This is the 454-machine generated quality score file, which contains a score for each base in
each sequence included in the FASTA file.
Mapping File (Tab-delimited .txt)
The mapping file is generated by the user. This file contains all of the information about the
samples necessary to perform the data analysis. At a minimum, the mapping file should
contain the name of each sample, the barcode sequence used for each sample, the
linker/primer sequence used to amplify the sample, and a Description column.
custom_parameters.txt
Structured file which can be customised to easily tune each analysis.
qiime_tutorial_commands_serial.sh
This is a script which will run all of the commands that we are about to see without user
input.
Data
This directory contains the reference files required for alignment of the OTUs.
To begin working with QIIME, you must enter the QIIME shell by typing ‘qiime’ in your working
directory. This has been successful if the prompt changes to end in ‘qiime >’. The commands
below will only be recognised within the special QIIME shell.
Assign Samples to Multiplex Reads
The first task is to assign the multiplex reads to samples based on their nucleotide barcode. Also,
this step performs quality filtering based on the characteristics of each sequence, removing any low
quality or ambiguous reads. The script for this step is split_libraries.py, but before running it we
make a directory for all the output:
42
…
cd qiime_tutorial_data
pwd
#This should show we are in qiime_tutorial_data
mkdir out
#This makes a directory for the results to go in
split_libraries.py -m Fasting_Map.txt -f Fasting_Example.fna -q Fasting_Example.qual -o split_library
This invocation will create three files in the new directory split_library/:
split_library_log.txt
This file contains the summary of splitting, including the number of reads detected for each
sample and a brief summary of any reads that were removed due to quality considerations.
histograms.txt
This tab delimited file shows the number of reads at regular size intervals before and after
splitting the library.
seqs.fna
This is a fasta formatted file where each sequence is renamed according to the sample it
came from. The header line also contains the name of the read in the input fasta file and
information on any barcode errors that were corrected.
Processing sequences into OTUs
There are several steps to go through to produce the annotated OTUs from the input sequences,
however the following 5 steps can be called using the ‘pick_de_novo_otus’ command found at the
end of this section.
1. Pick OTUs
Using the seqs.fna file generated from split_libraries.py, the sequences are clustered into
Operational Taxonomic Units (OTUs) based on their sequence similarity. This basic command uses
the default parameters: uclust matching, 0.97 sequence similarity, no reverse strand matching.
pick_otus.py -i split_library/seqs.fna -o out/uclust_picked_otus
2. Pick representative
Since each OTU may be made up of many sequences, we will pick a representative sequence for
that OTU for downstream analysis. This representative sequence will be used for taxonomic
identification of the OTU and phylogenetic alignment. (options: random, longest, most_abundant,
first)
mkdir out/rep_set
#This makes a subdirectory to store the representative set
pick_rep_set.py -i out/uclust_picked_otus/seqs_otus.txt -f split_library/seqs.fna
-o out/rep_set/seqs_rep_set.fasta –rep_set_picking_method most_abundant
3. Assign taxonomy
You can compare your OTUs against a reference database of your choosing. For our example, we
will use the default RDP classification system assignment method which comes ready with QIIME,
however BLAST is also an option.
assign_taxonomy.py -i out/rep_set/seqs_rep_set.fasta -o out/rdp_assigned_taxonomy
43
…
4. Make OTU table
Tabulates the number of times an OTU is found in each sample, and adds the taxonomic predictions
for each OTU in the last column if a taxonomy file is supplied.
make_otu_table.py -i out/uclust_picked_otus/seqs_otus.txt
-t out/rdp_assigned_taxonomy/seqs_rep_set_tax_assignments.txt -o out/otu_table.biom
5. Align sequences
Alignments can either be generated de novo using programs such as MUSCLE, or through
assignment to an existing alignment with tools like PyNAST. For small studies such as this tutorial,
either method is possible. However, for studies involving many sequences (roughly, more than
1000), the de novo aligners are very slow and assignment with PyNAST is preferred.
align_seqs.py -i out/rep_set/seqs_rep_set.fasta -o out/pynast_aligned_seqs
–alignment_method pynast -t data/core_set_aligned.imputed.fasta
6. Filter alignment command
Before building the tree, the alignment must be filtered to remove columns comprised only of gaps.
filter_alignment.py -i out/pynast_aligned_seqs/seqs_rep_set_aligned.fasta
-o out/pynast_aligned_seqs –lane_mask_fp data/lanemask_in_1s_and_0s
7. Build phylogenetic tree command
Produces a newick formatted tree file (.tre) which can be viewed using most tree visualization tools.
Method options: clearcut, clustalw, raxml, fasttree_v1, fasttree(default), muscle
make_phylogeny.py -i out/pynast_aligned_seqs/seqs_rep_set_aligned_pfiltered.fasta -o out/rep_set.tre
The above commands are integral to QIIME and further downstream analysis. Once their function
and process is understood, the parameters can be set in the custom_parameters.txt file and run
sequentially using the workflow script:
pick_de_novo_otus.py -i split_library/seqs.fna -p custom_parameters.txt -o out
# Make sure you change the path in the custom_parameters.txt file before running this command
Data to information
QIIME has many different ways to visualize and interrogate the data. Here we will explore just a
few.
Note: To open a HTML file type:
firefox filename
44
…
…
…
Heatmap
The QIIME pipeline includes a very useful utility to generate images of the OTU table. You can
open this file with any web browser, and will be prompted to enter a value for “Filter by Counts per
OTU”. Only OTUs with total counts at or above this threshold will be displayed. The OTU heatmap
displays raw OTU counts per sample, where the counts are coloured based on the contribution of
each OTU to the total OTU count present in that sample.
make_otu_heatmap_html.py -i out/otu_table.biom -o out/otu_heatmap
Taxonomy Summary Charts
The taxa of the samples can be visualised at each taxonomic level (see the' –L flag).
Here, summarize_taxa.py produces a text file at the Phylum level (Level 2=Domain, 3=Phylum,
4=Class, 5=Order, 6=Family, 7=Genus) and plot_taxa_summary.py produces the html output.
summarize_taxa.py -i out/otu_table.biom -o out/taxa_summary -L 3
plot_taxa_summary.py -i out/taxa_summary/otu_table_L3.txt -l Phylum -o out/taxa_charts -k white
Diversity
Community ecologists typically describe the microbial diversity within their study. This diversity
can be assessed within a sample (alpha diversity) or between a collection of samples (beta
diversity).
Alpha
Alpha diversity will be calculated and displayed though using this workflow. The full list of metrics
available can be found at[8]
http://qiime.sourceforge.net/scripts/alpha_diversity_metrics.html
. The
html visualisation file can be found at ‘out/arare/alpha_rarefaction_plots/rarefaction_plots.html’
alpha_rarefaction.py -i out/otu_table.biom -m Fasting_Map.txt -o out/arare -p custom_parameters.txt -t out/rep_set.tre
Beta
Beta diversity can be represented in many different ways, shown below. By rarefying the samples to
the smallest set (in this example dataset, 146 sequences) sample heterogeneity can be removed.
Firstly, 3d plots are generated using unifrac.
beta_diversity_through_plots.py -i out/otu_table.biom -o out/bdiv_even146 -p custom_parameters.txt
-m Fasting_Map.txt -t out/rep_set.tre -e 146
To view a 3d plot, navigate to the jar directory within the metric you wish to view
(weighted/unweighted, continuous/discrete) and enter ‘java -jar jar/king.jar */*.kin’ where you can
then view the output. The more traditional 2d plots are also generated by unifrac:
45
…
make_2d_plots.py -i out/bdiv_even146/unweighted_unifrac_pc.txt -o out/bdiv_even146/unweighted_unifrac_2d
-m Fasting_Map.txt -k white -p out/bdiv_even146/prefs.txt
These are easiest viewed through the html page:
‘out/bdiv_even146/unweighted_unifrac_2d/unweighted_unifrac_pc_2D_PCoA_plots.html’
Inter-Sample Distance
Distance Histograms are a way to compare different categories and see which tend to have
larger/smaller distances than others.
make_distance_histograms.py -d out/bdiv_even146/unweighted_unifrac_dm.txt
-m Fasting_Map.txt -o out/bdiv_even146/distance_histograms -p out/bdiv_even146/prefs.txt
The html is found at:
‘out/bdiv_even146/distance_histograms/unweighted_unifrac_dm_distance_histograms.html’
Jackknifing & UPGMA
To measure robustness of the sequencing effort, we perform a jackknifing analysis, wherein a small
number of sequences are chosen at random from each sample, and the resulting UPGMA tree from
this subset of data is compared with the tree representing the entire available data set. This produces
jackknifed weighted and unweighted 2d and 3d plots like above, and also jackknifed trees found in
the out/jack/ directory.
jackknifed_beta_diversity.py -i out/otu_table.biom -o out/jack -p custom_parameters.txt
-e 110 -t out/rep_set.tre -m Fasting_Map.txt
make_bootstrapped_tree.py -m out/jack/unweighted_unifrac/upgma_cmp/master_tree.tre -s
out/jack/unweighted_unifrac/upgma_cmp/jackknife_support.txt -o
out/jack/unweighted_unifrac/upgma_cmp/jackknife_named_nodes.pdf
evince out/jack/unweighted_unifrac/upgma_cmp/jackknife_named_nodes.pdf
A key feature of the QIIME interface is the ability to list the steps which you wish to run and have
them sequentially performed by running them as a standard shell script. In the file
qiime_tutorial_commands_serial.sh in your working qiime directory, you will find the commands
which we have just gone through. This can be called directly from the QIIME shell prompt and will
produce the same output as we have achieved, with no user input. This can be edited, along with
custom_parameters.txt to tune the analyses to your specific requirements.
What is described above is a brief introduction to the type of analyses which QIIME can perform.
Extensive details of the commands, parameters and metrics used can be found at
or through typing a QIIME command followed by ‘-help’ into the
qiime shell prompt.
46
…
…
…
…
…
Analysing sequences with MOTHUR
MOTHUR is another popular pipeline for performing microbial community analysis that integrates
many third party tools which have become standard in the field. MOTHUR is included in the
standard Bio-Linux distribution.
As an example, we will use the same data used in the previous QIIME tutorial. Please refer to the
previous QIIME tutorial for the description of the experiment and the data.
What follows is an adapted version of the exemplary tutorial provided by MOTHUR (which can be
found at[9]
http://www.mothur.org/wiki/Sogin_data_analysis
). Further details and parameters on the
below commands and many more can be found at this site. The material was compiled and adapted
by Soon Gweon, NBAF.
Introducing mothur: Open-source, platform-independent, community-supported software for
describing and comparing microbial communities. Schloss, P.D., et al., Appl Environ Microbiol,
2009. 75(23):7537-41
Preparation
First, we must copy the tutorial data to your home directory and extract it:
cd
tar -xvzf /usr/local/bioinf/documentation/bio-linux/intro_course/mothur_tutorial_data.tar.gz
cd mothur_tutorial_data
Entering the directory (cd mothur_tutorial_data) and listing the files (ls) will show what was
extracted:
Fasting_Example.fna
This is the 454-machine generated FASTA file.
Fasting_Example.qual
This is the 454-machine generated quality score file, which contains a score for each base in
each sequence included in the FASTA file.
Fasting_Example.oligos
This is generated by the user. This file is used to provide barcodes and primers to
MOTHUR.
data
This directory contains the reference files required for alignment of the OTUs.
To begin working with MOTHUR, you must enter the MOTHUR shell by typing ‘mothur’ in your
working directory. This has been successful if the prompt changes to end in ‘mothur >’. The
commands below will only be recognised within the special MOTHUR shell.
47
mothur
Assign Samples to Multiplex Reads and Quality Filtering
First, we need to separate each sequence according to the barcode and primer combination. The first
task is to assign the multiplex reads to samples based on their nucleotide barcode using the
information from oligos file. Also, this step screens sequences based on the quality file, truncating
reads at where the quality score falls below the threshold. The script for this step is trim.seqs:
trim.seqs(fasta=Fasting_Example.fna, oligos=Fasting_Example.oligos, qfile=Fasting_Example.qual, qaverage=25,
minlength=200, maxlength=1000)
This creates five files in the current directory:
Fasting_Example.trim.fasta
This is the processed fasta file.
Fasting_Example.trim.qual
This is the precessed quality file.
Fasting_Example.scrap.fasta
This file contains sequences which fell below the thresholds (below quality score of 25,
shorter
than 200 bps or longer than 1000 bps)
Fasting_Example.scrap.qual
This is the quality file for the scrapped sequences.
Fasting_Example.groups
This is a two-column list with the first column indicating the sequence names of those
sequences
in the Fasting_Example.trim.fasta file and the second column the group that it came
from.
Generating Alignment & Distance Matrix
The first thing we want to do is to simplify the dataset by working with only the unique sequences.
We are not chucking anything here, we are just making the life of your CPU and RAM a bit easier.
We do this with the command: unique.seqs
unique.seqs(fasta=Fasting_Example.trim.fasta)
We then need to generate an alignment of our data using the align.seqs command by aligning it to
SILVA-compatible alignment database reference alignment. Please note that this step can take
awhile to complete.
align.seqs(fasta=Fasting_Example.trim.unique.fasta, reference=data/silva.bacteria.fasta, flip=T)
Next, we need to filter our alignment so that all of our sequences only overlap in the same region
and remove any columns in the alignment that don’t contain data. We do this by running the
filter.seqs command.
48
filter.seqs(fasta=Fasting_Example.trim.unique.align)
Next, we want to calculate the column-formatted distance matrix, but we are only interested in
distances smaller than 0.15 at this stage. We will do this using dist.seqs command.
dist.seqs(fasta=Fasting_Example.trim.unique.filter.fasta, cutoff=0.15)
Classify Sequences
We then need to classify our sequences using the MOTHUR version of the “Bayesian” classifier.
We do this with classify.seqs command using the SILVA-compatible reference file and taxonomy
file(
http://www.mothur.org/wiki/Silva_reference_alignment
classify.seqs(fasta=Fasting_Example.trim.unique.filter.fasta, name=Fasting_Example.trim.names,
template=data/silva.bacteria.fasta, taxonomy=data/silva.bacteria.silva.tax)
Renaming Files
This step is done only to make our life easier by making copies of some files and giving it nice and
short names. The command system() allows you to run programs outside of MOTHUR without
leaving the MOTHUR shell.
system(cp Fasting_Example.trim.unique.filter.fasta final.fasta)
system(cp Fasting_Example.trim.names final.names)
system(cp Fasting_Example.groups final.groups)
system(cp Fasting_Example.trim.unique.filter.dist final.dist)
system(cp Fasting_Example.trim.unique.filter.silva.wang..taxonomy final.taxonomy)
Clustering Sequences
Now we want to assign these sequences to OTUs for every possible distance up to and including a
distance of 0.15. By default, this method uses the average neighbour algorithm.
cluster(column=final.dist, name=final.names, cutoff=0.15)
Generating OTU Table and Normalisation
Now that we have a list file, we need to create a table that indicates the number of times an OTU
shows up in each sample. This is called a shared file and can be created using the make.shared
command. We are only interested in the distance of 0.03 from the list file, so we give 0.03 to “label”
parameter.
make.shared(list=final.an.list, group=final.groups, label=0.03)
We then normalise the number of sequences in each sample. In order to do this, we need to know
how many sequences are in each step. You can do this with the count.groups command.
49
count.groups()
From the output we see that the sample with the fewest sequences had 146 sequences in it, so we
normalise all the samples to this number of sequences.
sub.sample(shared=final.an.shared, size=146)
Classifying OTU
The last thing we’d like to do is to get the taxonomy information for each of our OTUs. To do this
we will use the classify.otu command to give us the majority consensus taxonomy.
classify.otu(list=final.an.list, name=final.names, taxonomy=final.taxonomy)
Converting the shared file to BIOM-format
The make.biom command allows you to convert your shared file to a biom file. Please refer to
http://biom-format.org/documentation/biom_format.html
for detail.
make.biom(shared=final.an.shared, contaxonomy=final.an.unique.cons.taxonomy)
Data to information
MOTHUR has many different ways to visualise and interrogate the data. Here we explore just a few.
Heatmap
Now we’d like to compare the membership and structure of the various samples using an OTU-
based approach. Let’s start by generating a heatmap of the relative abundance of each OTU across
the 24 samples using the heatmap.bin command.
heatmap.bin(shared=final.an.shared)
The output will be in a SVG-formatted file called final.an.0.03.heatmap.bin.svg. In this heatmap,
the red colors indicate communities that are more similar than those with black colors.
Venn Diagram
MOTHUR allows you to generate a Venn diagram with 'venn command. Let’s take a look at the
Venn diagram for PC.354 and PC.355.
venn(shared=final.an.shared, groups=PC.354-PC.355)
This generates a file called final.an.0.03.sharedsobs.PC.354-PC.355.svg. To view the file, type the
following in another terminal:
eog final.an.0.03.sharedsobs.PC.354-PC.355.svg
When generating Venn diagrams we are limited by the number of samples that we can analyze
simultaneously. MOTHUR can generate up to 4-way Venn diagram:
50
venn(shared=final.an.shared, groups=PC.354-PC.355-PC.356-PC.481)
Finding and running useful scripts
Scripts are small programs written in a scripting language such as Perl or Python or even by compiling
commands you’d run directly in the shell into a shell script file. Unlike normal binary applications, the
program files can be examined and edited directly using a text editor. However, Linux is able to run these
text files as if they were compiled programs by automatically invoking the appropriate interpreter named on
the first line of the script – for example if the first line of a script says:
- !/usr/bin/perl
Then the script will be run using the Perl interpreter. Writing scripts is beyond the scope of this course, but it
is useful to be able to run scripts that others have written.
Exercise
http://nebc.nerc.ac.uk/tools/code-corner/scripts
•
Visit the above link, then find the “fastagrep” script located under “
”. (If you don’t have a net connection there is also a copy in bioinf_files)
•
Make a folder called “scripts” in your home directory and save the file there.
•
In a terminal run the command chmod a+x scripts/fastagrep to tell Linux that this file is an
executable script.
•
Type ~/scripts/fastagrep to actually run the script. In this case you will see basic help.
Fastagrep is a script to help extracting sequences of interest form a multi-FASTA file by matching text in the
header lines. It is a FASTA-aware version of the standard Linux ’grep’ command introduced in part 1. An
example invocation of fastagrep in the case where the FASTA file has Uniprot-style headers would be:
~/scripts/fastagrep -F ’OS=Zea mays’ uniprot_sprot.fasta
•
Here, the -F flag specifies an exact text match and the ’OS=…’ syntax is specific to
the headers used by Uniprot.
Tip:
•
If you get a “permission denied” error when running the script, it normally means that you missed
out the chmod a+x … part.
•
If you get a “bad interpreter” error it means that the interpreter named on the first line of the file
cannot be found on the system. You can always run the interpreter explicitly – eg. by typing perl
scripts/fastagrep.
A practical exercise using fastagrep is included in the next section.
Aligning sequences using MUSCLE
Aligning multiple sequences is a very common task, as it is the first step to comparing related sequences.
There are many algorithms for performing gapped global alignments over a set of sequences, most of which
can be used on either nucleotide or peptide input. Many web based tools offer to align sequences, for
example[10]
[11]can align sequences retrieved from a search on the reference database, and
additional sequences can also be uploaded and added to the alignment. GUI applications like ClustalX and
Jalview can call alignment applications like Clustal, MUSCLE, and MAFFT for you and display the results
graphically.
Sometimes you may want to run the alignment directly from the command line – reasons for this include:
51
•
You want to fine tune the options passed to the aligner
•
You want to use an aligner program that is not supported by the GUI or website you are using
•
You want to run the alignment remotely – for example on a powerful departmental server
•
You want to run several alignments at once using a loop or a short script
Exercise
Plants contain many closely related genes in the cellulose synthase family. Previous studies have examined
these in some model organisms, eg maize[ref below]. It might be useful to compare the cellulose synthase
genes in another plant of interest, or to align bacterial homologues against the plant genes.
For use in this exercise, the file all_cellulose_synthase.fasta in the example files directory
contains all the reference cellulose synthase genes from Uniprot (selected with the query
“name:cellulose synthase”).
1. Ensure that you have the fastagrep script available from the previous exercise.
2. Use fastagrep to extract all the sequences that come from oilseed rape (Brassica napus).
3. Modify your command so that instead of printing the matching sequences to the terminal
the results are saved as a file.
•
Hint – this involves using the > operator
4. Now invoke MUSCLE with the default parameters to perform the alignment. Use the
following command but replace the ??? with the appropriate filename:
muscle -in ??? -out seqs.aln
5. Run the Jalview application from the bioinformatics menu. Close the default project
windows that appear, and select “Input Alignment -> from File”. Now load seqs.aln,
enable colouring in the Colour menu and bring up the overview window from the view
menu.
Jalview has many options for viewing and editing the alignment, drawing trees, etc.
For comparing alignments, you may want to add the “-stable” flag to the muscle command in order to
maintain the sequences in the same order as the input FASTA file.
[ref for paper mentioned above]
Holland et al. 2000. A comparative analysis of the plant cellulose synthase (CesA) gene family.
http://www.ncbi.nlm.nih.gov/sites/entrez?db=pubmed&cmd=search&term=10938350
52
BLAST
The Basic Local Alignment Search Tool (BLAST) searches for regions of local similarity between
sequences. The program compares nucleotide or protein sequences or patterns to sequence, or sequence-
related, databases and calculates the statistical significance of matches.
The documentation here covers only the most commonly used BLAST implementation, BLAST+ from
NCBI. There are several other BLAST varients that essentially do the same thing. Some are commercial, for
example AB-BLAST from Advanced Biocomputing LLC, formerly known as WU-BLAST. There are also
many other programs that search sequence databases and perform local alignments. Before relying on
BLAST as your search tool you should consider whether one of these might better suit your analysis needs.
A few examples of ways to run BLAST, on Bio-Linux or otherwise
●
Locally installed command line against locally installed BLAST databases
●
Locally installed command line against remote databases
●
Locally through options in graphical programs (e.g. under the Run menu in Artemis)
●
Remotely through ssh tunnelling or the remote BLAST options in Artemis.
●
Remotely on websites such as those available at the NCBI and EBI
●
Remotely using webservices, either through programs such as Taverna, or through scripting
For this course, we assume that you are familiar with running BLAST searches using at least one web-based
interface. If you are not, then this is a good time to look at the facilities offered through one of these sites,
and to try BLASTing some of the example sequences in the coruse folder:
NCBI:
http://blast.ncbi.nlm.nih.gov/Blast.cgi
EBI:
http://www.ebi.ac.uk/Tools/sss/
Bio-Linux includes both the BLAST+ package and the older NCBI “blastall” implementation. Information
and links in the Bio-Linux Bionformatics Documentation System (icon on your Desktop) provide
information on both packages. The ncbi-blast+ package contains a number of programs allowing you to
carry out different types of searches, as well as to create databases, reformat reports, etc.
What this course covers
This course covers how to run BLAST+ programs via the command line and a few simple steps you can take
to work with more than one sequence at a time. We also cover how to install your own BLAST databases in
Appendix C. We do not cover the internals of BLAST searching in any detail or how to interpret BLAST
results.
Why use BLAST on the command line?
The web resources available for BLAST are highly developed, usually stable, and have access to a much
greater set of data than most people will have available locally. They also often provide lovely graphics and
links out to other data resources or analysis programs. So why use the command line at all?
For small volumes of data, where you wish to search a commonly available database or subset of data
available through a website, then web access is a very good option. Web-based utilities are also good for
experimenting with parameters when determining useful settings for your investigation. The command line
comes into its own for setting up searches quickly, for processing large volumes of data, for automating your
searches, and for giving you the ability to get just the information you want returned from the BLAST
53
searches. (This last point has been made easier than ever in the newer BLAST+ programs, where you can, to
a certain extent, specify which information to return in a tab delimited format
.)
General considerations for database searching
Database searching should be approached like an experiment. In particular: define your aims before your
start. This will save you an enormous amount of time, both in terms of time taken doing searches and time
taken bringing together and reporting your findings later.
Before you start searching with a sequence, it is useful to outline your answers to questions like:
●
What am I trying to find out/what do I want to do with the results?
●
What kind of database do I want to search with my sequence? E.g. nucleotide, protein, pattern, profile?
●
Which database(s) in particular do I want to search? Why?
●
Are there are any subsets of the database that I could or should restrict my search to?
●
Do I want to take into account potential frameshifts in my coding sequences?
●
What format is my sequence in?
●
Do I want to filter my sequence for repeats and low complexity regions before searching?
●
Is the scoring system I’ve chosen appropriate?
●
Where and how will I store a record of the parameters I’ve used and the database version I’ve searched
with?
A very, very brief introduction to BLAST+
BLAST+ includes programs to perform searches with different types of input against databases holding
different types of data. Each search combination is referred to by a particular name and has its own
command. A table of the basic BLAST “flavours” and what they do is given below.
Blastall flavour
Input sequence type
Database sequence type
blastn
nucleotide
nucleotide
blastp
peptide
peptide
blastx
nucleotide (6 frame conceptual
translation is created during run)
peptide
tblastn
peptide
nucleotide (6 frame conceptual
translation is created during run)
tblastx
nucleotide (6 frame conceptual
translation is created during run)
nucleotide (6 frame conceptual
translation is created during run)
1 You can return most information you want using the tab delimited output options in BLAST+. However, a key thing
missing is the Description field – usually the most interesting field for a biologist! To get this field, along with
others, out of a BLAST report, it is still necessary to consider custom scripting – or grabbing someone else’s script
that does the job!
54
We HIGHLY recommend you invest time learning about what BLAST does in detail, including how it works
and what the statistics is produces mean. The “take the top hit” method will rarely serve your research well.
We provide a list of references and helpful web pages in Appendix C that we hope will help you learn more
about blast programs.
There are many other programs available as part of the BLAST+ release apart from the ones above. These
include blastdbcmd, dustmasker, psiblast, rpsblast+, segmasker and srsearch.. These programs are not
covered here, but are worth learning about for your own work.
How a BLAST database looks on the file system
A typical BLAST database consists of three files names with extensions .pin .phr and .psq for protein
databases or .nin .nhr and .nsq for nucleotide databases. These files represent a specially indexed version
of a multi-fasta source file. Do not try to examine the files in a regular text editor (they appear as garbage),
and do not try to split the files apart. When invoking BLAST commands, just give the path to the database
without any extension (see examples). BLAST will know to find and read the three files.
A simple blastp search
The following is a basic blastp command – you can run it from within the course folder.
blastp -db blastdb/sprot –query cd4_cerae.fasta –evalue 0.0001 > cd4_cerae.blastp
The command is easy to understand when you break it down. It means:
➔
run blastp, i.e. a peptide sequence will be used to search a peptide database.
➔
The database (-db) to be searched is called sprot and can be found in the blastdb directory.
➔
The input sequence (-query) is cd4_cerae.fasta.
➔
Only report results of sequences with e-values (-evalue) better than (i.e. lower than) 0.0001.
➔
Put the results of this search in the file cd4_cerae.blastp, using standard shell redirection
(>).
You can fine tune BLAST easily using additional command line options. We highly recommend that you
read about BLAST and determine appropriate settings for your research questions. This will ultimately save
you a huge amount of time and energy.
A copy of the Swissprot part of Uniprot, formatted for BLAST searches, is located in the directory blastdb,
under your bioinf_files directory. We do not fully cover the use of makeblastdb in this course, but some
more info is shown in Appendix C. For completeness, the steps we took, including the command we used to
create the BLAST formatted Swissprot database, are as follows:
We downloaded the fasta formatted swissprot file from
ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/uniprot/swissprot.gz
into the blastdb directory under bioinf_files.
We then used the makeblastdb command in a one-liner run within the blastdb/ directory.
gunzip -c swissprot.gz | makeblastdb -title Swissprot -out sprot -dbtype prot -in -
Note the use of a hyphen “-” in place of a filename tells the command to get the input via the pipe “|”. This
does not work in all cases but is a common convention in command line tools.
55
Reference databases for BLASTing would normally be stored in a shared location
You can either give the full or relative PATH to your blast databases within the blast command, or you can
store your blast databases in a location that is supplied as the value for the BLASTDB environmental
variable and just provide the database name in the blast command line.
When loading reference BLAST databases onto Bio-Linux 6 you can can put them in the default BLASTDB
location /home/db/blastdb OR change the environmental variable BLASTDB to a location appropriate for
your work. If you do not have sudo access you will need to talk to the system administrator of the machine
about this. Note that the default location for blast databases may be different on different machines, and may
change on Bio-Linux in the future.
For the purposes of this tutorial, we will give each BLAST command the explicit location of the BLAST
database to search.
Exercise
●
Move into the bioinf_files directory if you are not already there.
●
List the files in the blastdb subdirectory. The files called sprot.p* are the files that BLAST uses when
it searches.
●
From within the bioinf_files directory, run the example command given previously, ie:
blastp -db blastdb/sprot –query cd4_cerae.fasta –evalue 0.0001 > cd4_cerae.blastp
●
Look at the results file that has been created.
●
Try a blastx search on the file unknown.fasta. This time set the evalue to 1 and save the results in
unknown.blastx. The command you use will start like this:
blastx -db blastdb/sprot -query unknown.fasta …???…
Recall that a blastx search translates a nucleotide sequence in six frames and searches a peptide database.
●
Look at the results file.
●
blastp expects a peptide query file, and blastx expects nucleotides. What would you expect to happen
if you use an inappropriate BLAST flavour? Try it and see.
Formatting BLAST output
You have now seen the default report format for BLAST searches. There are many options available using
the -outfmt option with a numerical argument between 0 and 11. The default is -outfmt 0.
The BLAST+ commands don’t (currently) have man pages, but to see a list of all the -outfmt options you
can use the builtin help function:
blastx -help | less
Exercise
●
Run either of the above BLAST searches again, this time adding the parameter -outfmt 6 to the
command. Make sure you change the name of the output file as well, or else just let the results get printed
to the screen.
●
Look at the results from this search and compare it to what was returned using default formatting. Is it
easier or harder to read? Is there information present in one report that is not in the other?
Note:''' BLAST+ programs offer finer control over the format and contents of results returned – see the help
page as mentioned above.
56
Handling multiple sequences
BLAST makes it easy to deal with a medium-sized number of sequences at once – say up to a few hundred.
For thousands of sequences, you will probably want to use the ideas introduced here, in conjunction with
running your searches on a compute cluster and using scripts to pull out information of relevance from the
result files.
The general principle of needing more sophisticated techniques as the data volume increases applies to pretty
much any bioinformatics task.
First we’ll look at BLASTing a file containing more than one sequence
In the next section we’ll process multiple sequences as input using a “foreach” loop
BLAST searching using fasta files containing more than one sequence
Exercise
●
Look at the contents of the file multiseqs.fasta in your bioinf_files directory. How many sequences
are in this file?
●
Run a blastx search using multiseqs.fasta as the input file.
blastx -db blastdb/sprot -query multiseqs.fasta -evalue 0.4 > multiseqs_1.blastx
●
Look at the results file to see how the results have been reported. How easy would this be to read and
understand? Could you load the results into other software tools?
●
Try the above query again, but with the -outfmt 6 flag.
●
Read about the -num_descriptions, -num_alignments and -max_target_seqs flags in the BLAST+
documentation. For very small studies, where you might read through the BLAST reports yourself rather
than doing further processing on them using the computer, these flags may help you otherwise.
Processing multiple files using a foreach loop
This section introduces a powerful shell feature that allows you to quickly automate repetitive tasks. In this
case we’ll use BLAST to illustrate the use of the loop, so you’ll need to look at the previous exercise before
attempting this one.
A foreach loops say to the computer:
“For each thing in this list, do the following:”
So, when running multiple BLAST searches, you might want to do something like:
“For each sequence in my list, run a blastx search against my Swissprot database.”
You can also create nested foreach loops. For example, if you had a list of sequences and a list of databases,
you could use a nested foreach loop to get the computer to do something like this:
“For each sequence in my sequence list, run a blastx search against each database in my database list”
You can run a foreach loop on arbitrarily long lists. However, for the exercises below, we will use just five
sequences:
testseq1.fasta, testseq2.fasta, testseq3.fasta, testseq4.fasta and testseq5.fasta.
57
The foreach loop explained step by step
You need to tell the computer the list of files to work on. Here, we will use a glob pattern match to indicate
the list of sequences we want to work with. Recall that echo simply prints its arguments and so can be used
to show glob expansions:
echo testseq*.fasta
or, if we wanted to be more specific:
echo testseq[1-5].fasta
We bind each file in the list to a loop variable within the first line of the foreach loop. So the following says:
“take each file in this list in turn and refer to it as j”:
foreach j in testseq[1-5].fasta
When we finish, our complete foreach loop will state:
foreach j in testseq[1-5].fasta ; do
blastx –db blastdb/sprot -query $j -evalue 0.01 -out $j.blastx
done
This means: for each sequence in the list in the first line, run the command in the second line. When all the
sequences in the list have been dealt with, then finish.
Loops are very powerful and useful, so it is worth understanding exactly how they work. A more detailed
explanation follows.
Explanation of the first line of a foreach loop:
●
we have used the command “foreach”. It’s not the only way to write a loop but it is the most used.
●
the “j” is a name we choose to refer to “each thing” – more specifically, for each thing we get to in the
list, let’s refer to it by the name j. This is an arbitrary name. You can use whatever you want. So the
following are equally correct to the line given above:
foreach myThing in testseq[1-5].fasta
calls each list item in turn “myThing”
foreach x in testseq[1-5].fasta
calls each list item in turn “x”
foreach seq in testseq[1-5].fasta
calls each list item in turn “seq”
Once you have chosen a name for each thing in your list, you must use that name with a dollar symbol “$” to
refer to the list item in any commands that follow within the foreach loop. Recall how the $ construct also
lets you access the contents of environment variables, like $BLASTDB.
58
Please note that the syntax used this section assumes that you are in the default Zshell. If the
commands fails for you and you are sure that you have typed them in correctly, please check your shell.
You can identify your current shell by typing the command
echo $0. If you are not in the zshell (zsh)
already, just type
zsh in your terminal window.
Other shells provide the same functionality as the foreach loop demonstrated here, but the syntax is different.
●
The keyword in is followed by a list of things to loop over. In this case the list is being generated as the
result of a single glob pattern expansion, but this need not be the case. You can list items explicitly, use
multiple patterns, or even generate a list on-the-fly using backtick substitution (not covered in this tutorial).
●
The semicolon serves to terminate the list of items to be processed, and do primes the shell to accept
one or more commands to be run within the loop. The single command done terminates this list.
●
So the overall effect of that one line is: “foreach thing that matches the pattern testseq[1-5].fasta, do
the following:”, and after that you just supply a regular command to run. Note how we can reference $j as
the input sequence and also use $j.blastx to generate a filename for the results – ie. the original name
with .blastx appended.
Hint: It is usually a good idea to check that the command or pattern used to create a list does actually
generate the list you expect before including it within a foreach loop. Once common trick is to add echo
on the start of the command within the loop, so the commands are printed to the screen but not run.
Exercise
Set up a foreach loop to run blastx searches using the five testseq*.fasta sequences with the Swissprot
database:
●
Type this command to begin the foreach loop as described above:
foreach j in testseq[1-5].fasta ; do
●
You will now be seeing something like:
live@machine[bioinf_files] foreach j in testseq[1-5].fasta ; do
foreach>
●
The foreach> is a prompt, much like the regular prompt – it is here we tell the computer what we
want it to do with each item in the list. To do this, type:
blastx –db blastdb/sprot -query $j -evalue 0.01 -out $j.blastx
Recall that we defined each thing that we want to work on by the letter j in the first line of the
foreach loop. In each subsequent line of the foreach loop, we refer to each thing by prefacing the j
with a $ sign.
Each $j in that command will be replaced by the name of a file from the list.
So here, the blastall command is executed with each filename in turn, and output files are named
using the sequence filename with .blastx appended.
●
You will now see another foreach> prompt, inviting a second command, but you are done so type
done
This indicates that there are no more processing steps to include in this foreach loop.
●
After running the foreach loop successfully, type the command
ls -l *blastx
59
You should now see that you have five blastx results files. Imagine you had 100 sequences to blast – you
could set up a foreach loop and go get a coffee. (Of course, you still need to figure out how you’re going to
use or analyse the results files if you’re working with large numbers of sequences.)
We mentioned above that the j in the foreach loop was an arbitrary name. As an example, if we had used seq
instead of j, the foreach loop would have been written:
foreach seq in testseq[1-5].fasta ; do
blastx –db blastdb/sprot -query $seq -evalue 0.01 -out $seq.blastx
done
Notice that we have just replaced each instance of $j with $seq. Be careful, as the shell will not notice if
your names do not match up, but will just substitute blank spaces into the command.
Exercise
●
Look through all the files called testseq*.blastx by using the command less:
less testseq*.blastx
●
To go to the next document, you need to type the two-character command :n
●
To quit, press q
Why go to all this trouble when we could just create a multiple fasta file and run a BLAST search in one go?
Well, there is often more than one way to do a task, but foreach loops can be used with any programs – not
just BLAST – and not all programs will take multiple inputs, so this method is widely applicable.
Multiple tasks, and even inner loops can be carried out in a single foreach loop, as the following
example shows.
60
Exercise – advanced looping
If you have time, you can run the following foreach loop. Try to figure out what it does before running it.
You may need to read the man pages for basename and cut to understand all the steps being taken. Note,
the text has been indented for clarity but you need not type it like this. Also note the special quotes in the
second line are backticks obtained with the key at the top left of the keyboard, next to number 1. These
serve to capture the output of the basename command into the newname variable, and later to drive an
inner loop from a list contained in a file. (Earlier, we said these wouldn’t be
covered in the course, but here’s a little taster. Backticks are a powerful feature
for any aspiring command-line guru to master!)
foreach seq in testseq[1-3].fasta ; do
newname=`basename $seq .fasta`
mkdir $newname
pushd $newname
blastx -db ../blastdb/sprot -query ../$seq -evalue 0.01 -outfmt 6 -out $newname.blastx
cat $newname.blastx | cut -f2 > top5.list
for hit in `cat top5.list` ; do
wget -q "
http://www.uniprot.org/uniprot/$hit.txt
done
popd
done
You can get the Z-shell to report what it is doing within loops and functions by running the command set
-x. To return to normal output type set +x.
Working with lots of BLAST results
Reading a few BLAST reports is fine, but when you have thousands, you presumably won’t be reading them
one by one yourself.
A common way to handle large volumes of BLAST results is to get the computer to process the report files,
pulling out key information. You can try using the various -outfmt options, which give you a great deal of
fine tuned control over what to report in tab delimited format. Alternatively, you can use a customised script.
You might choose to load such extracted information into a database, or for small scale studies, into a
spreadsheet. This topic is not covered further in this course, but we recommend BioPerl modules for parsing
BLAST report files. Example BioPerl scripts for BLAST parsing can be found on your Bio-Linux machine
under the following directory:
/usr/share/doc/bioperl/examples/searchio
61
EMBOSS Programs
EMBOSS is an extensive package of programs that cover areas of bioinformatics analysis including:
●
Sequence alignment
●
Rapid database searching with sequence patterns
●
Protein motif identification, including domain analysis
●
Nucleotide sequence pattern analysis—for example to identify CpG islands or repeats
●
Codon usage analysis for small genomes
●
Rapid identification of sequence patterns in large scale sequence sets
●
Presentation tools for publication
We recommend that you refer to the official EMBOSS overview at
http://emboss.sourceforge.net/what/#Overview
[12]to find out more about the extensive functionality available
via EMBOSS programs.
EMBOSS also consists of an underlying programming library, in case you are interested in building your
own EMBOSS tools.
Ways to run EMBOSS programs:
●
Locally installed, via the jemboss graphical interface on your Bio-Linux machine*
●
Locall installed via graphical interfaces available under the Applications | Bioinformatics | Emboss
menu
●
Locally installed, via the command line on your Bio-Linux machine*
●
Remotely on websites such as Mobyl:[13]
●
Remotely using webservices
Biological databases and EMBOSS on Bio-Linux
Certain EMBOSS programs can talk to local or remote biological databases. The version of EMBOSS
installed on Bio-Linux machines is pre-configured to access data from embl, emblcds, uniprot (including
swissprot and trembl) and Refseq from the EBI. Information about how to change this configuration can be
found at
http://nebc.nerc.ac.uk/tools/bioinformatics-docs/other-bioinf/emboss-applications-and-databases
Sequence formats and EMBOSS
EMBOSS programs accept most common sequence formats. EMBOSS also includes a versatile tool called
seqret that can be used to convert between sequence formats should you need to do this for other
bioinformatics programs.
62
A comparison of the Jemboss and command line interfaces for EMBOSS programs
Interface
Pros
Cons
Jemboss
Graphical
Interface
Easy to see the programs available and what
type of analysis they do
Easy to run
Many programs accept input files with
multiple sequences, either directly or using
lists of sequence or filenames.
Documentation is easy to access
Much slower to set programs running than
on the command line
Not always obvious how to save and where
to save output
Additional programs with EMBOSS
interfaces are not available via this
interface. e.g. there are emboss interfaces
for phylip and hmmer programs, among
others, which are useful when creating
pipelines and automating tasks.
Programs that are interfaces to others (e.g.
emma is an EMBOSS interface to clustalw)
may not always work smoothly via
Jemboss, even though they are fine via the
command line.
Command
Line
Prompted command line makes programs
easy to run
Programs accept input files with multiple
sequences either directly or using lists of
sequence or filenames.
Easy to automate tasks and create pipelines
of tasks
Documentation still easy to access
Prompted command line makes it easy to
overlook many of the options available
You have to read the documentation to find
out about the options available
Working with EMBOSS programs
We will run a simple 3 stage task twice – once using Jemboss and once using the command line so that you
can experience ,and get a feeling for the differences between, the two interfaces. The task is to fetch a
sequence file from the EMBL database, extract all the mRNA sequences from the feature table and search for
palindromes in those mRNA sequences.
63
Exercise – using Jemboss
●
Start Jemboss on Bio-Linux by typing jemboss on the command line. It can also be started by clicking
on the icon under the Applications | Bioinformatics menu.
●
Click on each of the categories (e.g. Alignment, Display, etc) to see what programs are listed.
●
When you’re finished exploring, click on the Data Retrieval category and choose coderet which is
under Sequence Data.
●
Scroll to the bottom of the window and click on the
button to bring up a documentation window.
Read about what coderet does.
Figure 1: The Jemboss graphical interface to EMBOSS programs
Figure 2: The GO button is pressed when you are ready to run the program. The i button pops up a
window with documentation. Some, but not all programs, will also have an Advanced Options button that
will bring up, often very useful, optional fields.
64
Exercise continued
●
Scroll back to the top of the coderet form in the Jemboss window, and fill in a Sequence Filename. In
fact, we want to pull a sequence directly from embl at the EBI. The sequence we want is from a plasmid
and has the accession number U80928. To fetch it from the EBI, you need to type:
embl:U80928
into the Sequence Filename box.
●
Enter a filename into the outfile file name box. For example, to distinguish from your later
work, you could use the name: jemboss_bx.coderet.
●
Scroll to the bottom of the window and hit the GO button.
●
When the program has finished, a new window called Saved Results should appear. (Don’t be
fooled – your results haven’t been saved yet!) There should be a number of tabs in that window.
One will be called the name you entered into the the outfile file name box (e.g.
jemboss_bx.coderet) The others will likely be called things like u80928.cds, u80928.noncoding,
etc.
●
Take a look at the type of information in each tab. In particular, take note that:
➢
each of the tabs that contains sequence information contains multiple sequences
➢
the command line you would use to run this program identically to how you just ran it via
Jemboss is provided to you under the cmd tab. This will be useful later.
●
To work with any of this data further, you have to save it to a local file. Click on the tab with
the name ending in .cds. Choose the File | Save to Local File… option and save this to a location
you can find again (e.g. under your bioinf_files directory). Give it a name that will distinguish it
from later work -e.g. jemboss_bx.cds. Do not close the Saved Results window as we want to
refer to the information under the cmd tab later.
●
Go back to the main Jemboss window, go to the Nucleic | Repeats section and choose
palindrome from the list of programs.
●
Browse for the file you just saved using the Browse files… button next to the box under
Sequence Filename near the top of the page. Note that you’ll have to set the Files of Type: option
to All Files to find your saved file because it has a .cds suffix.
●
Check that you’re happy with all the required options, and give a filename in the outfile file
name box. For example, jemboss_palin.txt. Then press the GO button.
●
Scan through the results to see what has been returned to you.
You can also view listings of the files on your system using the Jemboss file manager functionality. Click on
the symbol at the bottom right side of the Jemboss window. If you double click on the name of a file that
contains text, it will pop up in another window for you to view or edit. Note: the file listings in the Jemboss
window are not updated unless you refresh them manually - the regular file browser or the ls command are a
better way to keep track of what files have been created or deleted.
Using the EMBOSS command line
All EMBOSS commands follow a similar pattern:
●
If you just type the command name, then you are prompted for required information.
65
●
If you type the command name followed by -opt then you are prompted for optional
information as well as required information.
●
If you type the command name, followed by a minimum amount of information, and -auto, the
program runs and uses defaults for anything you have not specified in the command.
●
The full command (i.e. the command and all relevant options and values) can be specified by
including parameters and arguments on the command line.
●
The command name followed by -h or -help brings up information about the main options for
the program.
●
The command name followed by -h -v brings up information about all options for the program
●
Typing tfm followed by the command name brings up the full documentation for the program.
So, using the EMBOSS program seqret as an example, we could run:
seqret
Run seqret and prompt for required information.
seqret -opt
Run seqret and prompt for required and optional information.
seqret -sequence embl:X03487
Run seqret, specifying the sequence. Prompts for additional
information.
seqret -sequence embl:XO3487 -auto
Run seqret, specifying the sequence. Defaults are used for all other
options.
seqret -help
Show information about the main options for seqret
seqret -h -v
Show information about all options for seqret
tfm seqret
Show full documentation for seqret
Much more information about the EMBOSS command line syntax is available at:
http://emboss.sourceforge.net/developers/acd/commandline.html
Exercise – using EMBOSS command line
●
Look at the cmd tab in your jemboss results window for coderet. You should see the following:
coderet -seqall embl:U80928 -outfile jemboss_bx.coderet -auto
This command runs coderet, specifies the sequence to use and sets the output file name. The -auto option
indicates that you do not want to be prompted for further information. This results in default values being
used for all options you have not specified on the command line.
●
Read about coderet by bringing up the information via the command line:
coderet -h or coderet -help
brings up a list of main options
coderet -h -v
brings up a list of all available options
tfm coderet
brings up the full documentation
66
(EMBOSS commands exercise continued)
●
To make things simple, we will edit the command line in the coderet cmd tab of the Saved Results
window in Jemboss, and then copy and paste our final command line into a terminal to run the program.
Go to the coderet cmd tab of the Saved Results window in Jemboss, and edit the command to give a
new output filename. e.g.
coderet -seqall embl:U80928 -outfile cl_bx.coderet -auto
●
Open a new terminal window and cd to your bioinf_files directory. Make a new directory to store your
result files (as it will make it easier to see what files the program generates by default).
mkdir cl_dir
●
Change directory into your new directory, copy and paste the coderet command line above into the
terminal and press the return key. (Recall that we covered highlighting and pasting text using mouse
buttons near the end of the first half of this tutorial.) ie:
cd cl_dir
coderet -seqall embl:U80928 -outfile cl_bx.coderet -auto
●
When the program finishes, list the files in your directory. What has coderet produced? How does this
compare with the tabs presented to you when you ran coderet via Jemboss?
You may notice that we have generated a lot of files we don’t need. We could have specified to coderet that
we only wanted the mRNA sections from the embl entry BX255937. To find out how, you’ll need to refer
to the coderet documentation (the lists of options won’t tell you enough).
●
Now run palindrome on the mRNA sequence. To do this, you could edit, copy and paste the the
command in the Jemboss Saved Results window for palindrome, or you can type palindrome on the
command line and answer the prompts. Please run palindrome now, doing one of these.
Once you get to know it, the command line is much faster to get running than programs via Jemboss.
However, the power of using the EMBOSS command line is much greater if you need to process groups of
files, or do things repetitively.
Below we’ll go through an example of running an emboss program on a batch of files using a single
command.
If you want to run a job like this repetitively, you can save the commands in a text file and then set things up
to get those command executed whenever you want (either by you directly, or by your
computer at a time
you schedule). We do not cover this in these course notes, but please ask the demonstrator if you would like
to know more about this.
67
Exercise
Fetching a list of sequences using seqret.
●
Look at the contents of the file hexaseqs.list in your bioinf_files directory. e.g. using the
command less. You will see a list of sequence ids and the database those sequences are in.
●
Quit less. (hit q)
●
We need to tell EMBOSS programs when they are going to work on a list of files rather than
just a single file. To do this, we preface the filename with the @ symbol. So, to fetch the list of
sequences in the hexaseqs.list file, we can use the command:
seqret -sequence @hexaseqs.list
The default behaviour of seqret is to fetch sequences in fasta format, with all sequences in a
single file with a filename that uses the id of the first sequence. By now you should know
how to go about finding out how to alter aspects of the program behaviour like these.
●
Take a look at the sequence file you have generated.
You can use this same “list of sequences” syntax with Jemboss. e.g. you could run seqret via
Jemboss and specify the sequence name as @hexaseqs.list.
68
General things to keep in mind
If you suspect there may be a more
efficient way to do what you are doing, there probably is!
If you find yourself doing anything
repetitively, there is probably an easier way to do it.
Please
read documentation and seek advice. It will save you a lot of time in the end!
A very basic sequence assembly
This demonstration takes you through a very simple assembly of some reads from a mitochondrial genome.
This is in no way supposed to be a tutorial on genome assembly, but rather a way to see various tools in
action on a small dataset.
This section of the course was originally written as a separate tutorial by Dan Pass. Note that, in all the
commands given in this tutorial, $ represents your terminal prompt. This is a common convention, even
though the real prompt will be something like “live@biolinux[live]”. Lines beginning with # are comments
and not to be typed.
Setup
•
Open up the Bio-Linux Documentation icon in the Dash menu, then the Introductory Tutorial
folder. You should see several tar files. Select assembly_taster.tar.xz and right click it. Select
Extract To… from the pop-up menu. Extract to your home directory, which on the Live USB system
is listed as live in the list on the left.
•
Open a terminal, then change into the new directory and list the files:
$ cd assembly_taster
- -lh options to ls show human-readable file size
$ ls -lh
•
To get a quick look at the input data, you can view it in the less text file viewer:
$ less mt_reads.fastq
- as usual, press q to return to the terminal.
•
Make a new directory to store your results:
$ mkdir results
Quality Checking
Firstly, in receiving a set of sequence data it is paramount to assess the quality of the dataset. A useful tool is
FastQC which gives a quick graphical overview of the dataset.
•
Run FastQC on the dataset
$ fastqc -o results mt_reads.fastq
•
Open the HTML report file.
- The ampersand (&) will put the process in the background so you can still use the terminal
$ firefox results/mt_reads_fastqc/fastqc_report.html &
Split Barcodes
The sequencing data may be barcoded, depending on the experimental set up. Here, two mitochondria have
been sequenced together, with differing 10bp barcodes at the 5’ end. This allows us to split the data into two
sets whilst only performing one sequencing run. Here we use a standard script from the fastx toolkit
(
http://hannonlab.cshl.edu/fastx_toolkit/index.html
69
•
Use fastx splitter splits mt_reads.fastq by barcode.
- –bol indicates that the barcodes are at the 5’ end.
- Note the following command should be typed on a single line:
$ fastx_barcode_splitter.pl <mt_reads.fastq –bcfile mt_barcodes.txt
–bol –suffix .fastq –prefix results/
There are now two .fastq files in the results directory; one for each barcode. There is also an unmatched.fasta
file which should be empty. We will be focusing on the first mitochondrion, ie. the one now in
results/mt1.fastq.
Clean Up
To remove artefacts and improve the assembly we will do two steps:
1) Trim barcodes
This removes the barcode sequences from the beginning of each read. The -Q33 is required due to
differences in sanger and illumina encoding.
$ cd results
$ fastx_trimmer -i mt1.fastq -f 8 -o trimmed_mt1.fastq -Q33
2) Quality Filter
Removing
low quality sequences increases the accuracy of the assembly.
Here
we remove any sequences which do not have >25 phred quality score (-q) at 80% of bases (-p). (n.b.
https://en.wikipedia.org/wiki/Phred_quality_score
).
•
Run the quality filter
- -v instructs the script to give ‘verbose’ output and it is common to find in similar scripts.
$ fastq_quality_filter -i trimmed_mt1.fastq -q 25 -p 80
-o qual_trim_mt1.fastq -Q33 -v
Note that you could have run both the previous commands in one shot, combined as a pipeline.
$ fastx_trimmer -i mt2.fastq -f 8 -Q33 |
fastq_quality_filter -q 25 -p 80 -Q33 -o qual_trim_mt2.fastq
70
Assembly With Velvet
Velvet (
https://www.ebi.ac.uk/~zerbino/velvet/
) is a highly popular short-read assembler which is available
on Bio-Linux. There are countless parameters and combinations to achieve the best assembly, but we will
run close to default here. We will assess the quality of the assemblies in the next step.
•
Run velvet in single-end mode with k=21
‘
k’ signifies the Kmer length i.e. the length of sub sequences that the data is being broken up into, and is
one of the most important parameters to manipulate. Full parameters can be seen by typing either
command with no flags.
- You should still be in the results directory at this point
- velveth is a ‘hash program’ which breaks down your data into Kmer sized sequences
$ velveth velvet_k21 21 -short -fastq qual_trim_mt1.fastq
- velvetg performs de Bruijn graph construction, error removal and repeat resolution
$ velvetg velvet_k21 -read_trkg yes -amos_file yes
•
Inspect the results in the Tablet graphical viewer (not ideal - we have 139 contigs):
$ tablet velvet_k21/velvet_asm.afg &
Quick ‘cheat’
VelvetOptimiser is a script which automatically tries multiple parameter combinations and returns the best
assembly it can find. It can be helpful in pointing you in the right direction.
•
Try using velvetoptimiser
$ velvetoptimiser -s 27 -e 31 -f ‘-short -fastq qual_trim_mt1.fastq’ -a 1
$ tablet auto_data_31/velvet_asm.afg &
Assembly With Abyss
Abyss (
http://www.bcgsc.ca/platform/bioinfo/software/abyss
) is another popular assembler which we will
run to give a comparison. Again, multitudes of parameters are available, but here we will run mostly with
default settings, just optimising the K-mer length.
A major benefit of working in a command-line environment is the ability to loop easily through multiple
values. Without an existing ‘optimiser’ type program, a shell loop can be used to try many values.
71
•
Run abyss in single-end mode with k=21
$ abyss -k21 qual_trim_mt1.fastq -o abyss_contigs.fa
•
Try abyss with multiple kmer values
- Type the first line and press return. The prompt will change to “for>”
$ for k in {15..20}
for> abyss -k$k qual_trim_mt1.fastq -o abyss_k$k.fa
- This will run abyss for all values of k between 15 and 20, and
- produce output for each permutation.
Assessing The Assemblies
We used tablet to view the output from Velvet assemblies. This isn’t possible with the Abyss output as the
program does not provide a full assembly, just the consensus contigs. We can obtain some simple statistics
on all the assembly results on the command line.
For example, the gnx-tools command will output basic statistics on the multi-fasta file produced by the
assembler.
•
Compare assemblies with gnx-tools
$ for f in velvet_k21/contigs.fa auto_data_31/contigs.fa abyss_contigs.fa
for> gnx-tools $f
Adding Some Annotation
If sequence assembly is a tricky process to master then sequence annotation is a bona fide black art. There
are various approaches that one can use and several pipelines available that will help. But in this case, we
just want to get something to look at in Artemis. We’ll quickly scan the assembled genome for likely open
reading frames. We’ll use the Abyss output as this has (hopefully!) produced a single contig.
Glimmer3 (
http://ccb.jhu.edu/software/glimmer/index.shtml
) is an application for predicting open reading
frames in prokaryotic genomes. As with the assemblers above, it should generally be tuned for the specific
organism that you are working with and also provided with an appropriate training data set. But in this case
we will just run it quickly with the default options (don’t do this if you want actual meaningful results).
A Perl script is provided to convert the output from Glimmer into something that Artemis can view. You
don’t need to be a Perl programmer to re-use useful scripts like this.
$ g3-from-scratch abyss_contigs.fa glimmer
$ perl ../glimmer_to_gbk.perl <glimmer.predict >glimmer.gbk
$ artemis abyss_contigs.fa &
You should now be looking at a view of the contig in Artemis. From the File menu select Read An Entry… and
choose the file glimmer.gbk.
To conclude this section, load the file human_mitochondrial.gbk into Artemis for comparison. This is not
exectly the same as the mitochondrial data you’ve just assembled (which is from Lumbricus rubellus) but it is
fully annotated. Annotation will have been achieved using a combination of automated tools and manual editing
in Artemis. You can find more on Artemis, and on how to identify genes using BLAST, in the next section.
72
Artemis
Artemis is a DNA sequence viewer and annotation tool, allowing visualisation of sequence features and the
results of analyses within the context of the sequence and its six-frame translation. Artemis can read embl or
genbank format files. Sequences can be loaded from local files or via the network from the EBI.
Ways to run Artemis:
●
from a locally installed version on your Bio-Linux machine*
●
via Java Web Start from the Sanger Centre
http://www.sanger.ac.uk/resources/software/artemis/java/artemis.jnlp
73
Figure 16: Artemis Entry window after hsy14768.embl is loaded.
Exercise
●
Start Artemis on Bio-Linux by typing '''artemis on the command line or by choosing the
option '''Artemis from under the Bioinformatics Applications graphical menu.
●
Now choose the option Open… from under the Artemis File menu, and select the
file hsy14768.embl from within the bioinf_files directory.
This should open up a large window, as shown in Figure 14, where this sequence is displayed
graphically .
●
Open a terminal window and view the text of the embl entry using the command
less hsy14768.embl
Notice how Artemis is providing a graphical representation of what is in the text file.
●
Try choosing Mark Open Reading Frames from under the Create menu of
Artemis.
●
Choose to mark open reading frames with a minimum size of 200.
You should now see two boxes near the top in the Entry section, the first called hsy14768.embl
and the other called ORFS_200+.
●
Uncheck the box next to hsy14768.embl. You should now be able to scroll along the
window horizontally and easily see the open reading frames you marked.
●
Check the box next to hsy14768.embl again. Look at the information in the bottom
frame of the window. Notice how it is related to the images in the frames above.
●
Try clicking on some of the lines in the bottom frame and seeing what happens in the
images in the other two frames.
●
Explore the options available to you. (Not all options will be functional by default. See the
information about the Run menu below)
●
Close the Artemis Entry Editing window using File | Close.
●
You can also load up files direct from the EBI. If you want to try this, then choose File |
Open from the EBI – Dbfetch… option in the original small Artemis window and enter the
accession number BX255937.
●
When you are done, close Artemis by choosing File | Close in the sequence entry
window and then choosing File | Quit in the main (small) Artemis window.
You can run various programs on your sequence, or parts of your sequence, from under the Run menu in
Artemis. Some of the options in this menu need to be configured to be appropriate for your site. There is
information on how to do this on our website at:
http://nebc.nerc.ac.uk/tools/bioinformatics-docs/faq#blast_art
If you are not the system administrator of your Bio-Linux machine, then you will probably need to liaise
with the person who is to get this set up properly.
74
We also highly recommend Artemis’ sister program Act, which can be used to graphically view a pairwise
BLAST betrween two or more sequences.
Appendix A – BLAST references and documentation
Web pages
The blastall and blast+ page in your Bio-Linux Bioinformatics Docs provides links to local web pages with
information about NCBI BLAST programs. You can also access this remotely at the URL:
[http://nebc.nox.ac.uk/bioinformatics/docs/blastall.html http://nebc.nerc.ac.uk/bioinformatics/docs/blastall.html
http://nebc.nerc.ac.uk/bioinformatics/docs/blast+.html]
NCBI BLAST Manual pages
[http://www.ncbi.nlm.nih.gov/books/NBK1763/ http://www.ncbi.nlm.nih.gov/books/NBK1763/
]http://www.ncbi.nlm.nih.gov/blast/blast_help.shtml
NCBI BLAST Web Interface paper
http://nar.oxfordjournals.org/cgi/content/full/36/suppl_2/W5
Sequence similarity statistics
http://www.ncbi.nlm.nih.gov/BLAST/tutorial/Altschul-1.html
NEBC BLAST Frequently asked questions
http://nebc.nerc.ac.uk/tools/bioinformatics-docs/other-bioinf/blastfaq
NEBC November 2007 Masters Bioinformatics Course (covers older blastall, rather than BLAST+)
[http://nebc.nerc.ac.uk/support/training/course-notes/past-notes/nebc-introduction-to-bioinformatics-msc.-biology-2007 http://nebc.nerc.ac.uk/support/training/course-notes/past-notes/nebc-introduction-to-bioinformatics-
msc.-biology-2007]
References
The book by Ian Korf is a good place to start in learning about what BLAST can do, how it does it and what BLAST output means. It
is now out of date however, and should be read in conjunction with the new blast+ documentation. Also note that wu-blast is now
AB-blast, which is licensed software from Advanced Biocomputing LLC.
S. F. Altschul, T. L. Madden, A. A. Schaffer, J. Zhang, Z. Zhang, W. Miller, and D. J. Lipman.
Gapped blast and psi-blast: a new generation of protein database search programs.
Nucleic Acids Res, 25(17):3389–402, 1997.
Lm05110/lm/nlm Journal Article Research Support, U.S. Gov’t, P.H.S. Review England.
S. F. Altschul, J. C. Wootton, E. M. Gertz, R. Agarwala, A. Morgulis, A. A. Schaffer, and Y. K. Yu.
Protein database searches using compositionally adjusted substitution matrices.
Febs J, 272(20):5101–9, 2005. Z01 lm000072-10/lm/nlm Journal Article Review England.
C. Camacho, G. Coulouris, V. Avagyan, M.N. Papadopoulos, K. Bealer and T.L. Madden.
Blast+: architecture and applciations. BMC Bioinformatics, 10: 421, 2009
S. R. Eddy. Where did the blosum62 alignment score matrix come from?
Nat Biotechnol, 22(8):1035–6, 2004. Evaluation Studies Journal Article Review United States.
Ian Korf, Mark Yandell, Joseph Bedell, and Stephen Altschul.
BLAST. [“An essential guide to the Basic Local Alignment Search Tool”. Includes bibliographical references and index.]
O’Reilly, Sebastopol, Calif. ; Farnham, 2003. GB A3-Y7706 ill. ; 24 cm.
A. A. Schaffer, L. Aravind, T. L. Madden, S. Shavirin, J. L. Spouge, Y. I. Wolf, E. V. Koonin, and S. F. Altschul.
Improving the accuracy of psi-blast protein database searches with composition-based statistics and other refinements.
Nucleic Acids Res, 29(14):2994–3005, 2001. Journal Article Review England.
Y. K. Yu, E. M. Gertz, R. Agarwala, A. A. Schaffer, and S. F. Altschul.
Retrieval accuracy, statistical significance and compositional similarity in protein sequence database searches. Nucleic Acids Res,
34(20):5966–73, 2006. Evaluation Studies Journal Article Research Support, N.I.H., Intramural England.
75
Appendix B – Creating local BLAST databases
Obtaining local BLAST databases
To get the most from BLAST, you should search against a relevant database, which may mean using the
relevant parts of a larger database. In general, BLAST searching against the whole of nr or the whole of embl
is not a particularly good idea. It takes up your time and computer resources, returns BLAST results with less
useful statistics and often less meaningful results. For example, if you are studying marine viruses, do you
really care about all the mouse sequence in nr or embl?
Web resources often offer different data subsets you can search against. For example, using the NCBI
BLAST pages, you can choose from a certain number of database sections, or you can fine tune the sequence
set you blast against using Entrez queries:
http://blast.ncbi.nlm.nih.gov/Blast.cgi?CMD=Web&PAGE_TYPE=BlastDocs&DOC_TYPE=FAQ#entrez
http://www.ncbi.nlm.nih.gov/bookshelf/br.fcgi?book=helpentrez&part=EntrezHelp
Using the EBI BLAST services, you can choose from a number of data subsets, as well as having a choice of
WU-blast or NCBI blastall.
http://www.ebi.ac.uk/Tools/blast/
To run BLAST locally, you need to index your collection of sequences; it is these indices that BLAST reads
when searching. For some databases or database divisions, you can download prepared BLAST indices from
sites such as the NCBI. These are convenient, but do restrict you to searching against particular sets of
sequences. It is often useful to create a set of sequences chosen for the types of searches you wish to carry
out (e.g. organism or tissue specific) and format them into a database you can search using BLAST.
Any set of fasta sequences can be indexed for BLAST searching. Creating useful sets of sequences is beyond
the scope of this course, but two resources to consider are SRS (
) and Entrez
http://www.ncbi.nlm.nih.gov/books/bookres.fcgi/helpentrez/EntrezHelp.pdf
).
For NCBI blastall, the formatdb command is run on fasta formatted files to create BLAST indices.
For BLAST+, the program used is called makeblastdb, and this is the you want to use, though BLAST+ will
happily search databases made with formatdb.
Some data resources useful for local BLAST
URL
Database File
format
Contents
ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/uniprot/
uniprot
fasta
Uniprot, swissprot and
trembl
[ftp://ftp.ebi.ac.uk/pub/databases/uniprot/current_release/knowledgebase/taxonomic_divisions/ ftp://ftp.ebi.ac.uk/pub/databases/uniprot/current_rele
ase/knowledgebase/taxonomic_divisions/]
uniprot
embl
Uniprot divisions
[ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/emblrelease/ ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/emblreleas
e/]
embl
fasta
Individual embl divisions
ftp://ftp.ebi.ac.uk/pub/databases/embl/release/
embl
embl
Individual embl divisions
[ftp://ftp.ncbi.nlm.nih.gov/blast/db/ ftp://ftp.ncbi.nlm.nih.gov/blast/db/
ftp://ftp.ebi.ac.uk/pub/blast/db/]
various
blast
nr, nt, env and a few other
BLAST formatted databases
or database sections.
ftp://ftp.ncbi.nlm.nih.gov/genbank
genbank
genbank
Individual genbank divisions
76
One thing to note in the table above is that uniprot divisions are provided in embl format. However, BLAST
indices are created from fasta format files. Unfortunately, the EMBOSS program seqret, which you saw
earlier, does not handle entire database divisions well. Instead, you can use a simple script to do the
conversion. Instructions on this are below.
If you choose to use pre-formatted BLAST databases, make sure you read the notes about them (usually
available as a file called something like REAMDE on the FTP site you get the BLAST files from) as they
can be slightly different than the database that results from downloading and formatting your own.
Building BLAST indices from local sequence files
We will use the uniprot swissprot virus division as an example here. As this is distributed in embl format,
and we need it in fasta format, we include a format conversion step in the instructions below.
Bio-Linux machines by default have the BLASTDB environmental variable set to a central location. To find
out where it is set to on your machine, you can use the command:
echo $BLASTDB
If you are logged in as an administrative user, then you will be able to download and work in any area on the
machine using your sudo privileges. If you are on a multi-user system and are not an administrative user, the
default location for BLAST databases may not be writable by you. In this case, you should talk to your
system administrator: either to ask them to give you privileges in the central BLAST database folder, or warn
them that you are about to use lots of space in your account for BLAST databases.
These instructions assume that you are working from the directory where you will be storing your BLAST
database files. This is not normally the case. Usually, if you download BLAST databases into your account,
it is easiest to set the BLASTDB environmental variable to the location of these BLAST databases, and then
work from a convenient folder where you plan to store your results. You can set the BLASTDB
environmental variable for a single session by typing a line of the form below in the terminal you are
working in. To set this variable for every session, you can add the line to your ~/.zshrc file.
export BLASTDB=”$HOME/blastdb”
●
Download the database section of interest. Here we will work with the uniprot swissprot virus division:
wget
77
Understand your databases
It is important to read the documentation about the databases you choose to work with.
For example, uniprot and nr are not the same. nt is not a non-redundant database; nr is.
Knowing what is in a database you work with is vital in understanding your results.
Nucleic Acids Research publishes a database issue in January of each year.
This is an excellent resource for finding out more about available database resources.
Another useful resource is the information available via the links on the Library page of SRS at the EBI:
http://srs.ebi.ac.uk/srsbin/cgi-bin/wgetz?-page+top
●
If you don’t already have a sequence conversion tool, download the emblToFastaAndPreProcess.pl
script from the NEBC site.
wget http://nebc.nerc.ac.uk/downloads/scripts/bioinf/emblToFastaAndPreProcess.pl
This script converts embl sequence to fasta sequence. Due to issues that sometimes appear because of the
formatting of information in the feature table, it does so by removing the feature lines from the entry before
conversion. A version of the script that does not pre-edit the feature lines is also available:
http://nebc.nerc.ac.uk/downloads/scripts/bioinf/emblToFasta.pl
●
Make this script executable.
chmod u+x emblToFastaAndPreProcess.pl
●
This script can handle compressed files, so you can create a fasta formatted copy of the
uniprot_sprot_viruses division by running the command:
./emblToFastaAndPreProcess.pl uniprot_sprot_viruses.dat.gz
Notice the ./ at the start of the line. You need this if you are running the script from the directory you are in.
There are better ways to do this if you plan to keep this script for use again, but they are not covered here.
●
When the script is finished, you should find a file called uniprot_sprot_viruses.fasta in your directory.
This is the file we build the BLAST database from.
makeblastdb -dbtype prot -in uniprot_sprot_viruses.fasta -out sprot_virus
●
You should now have four new files in your directory: sprot_virus.psq, sprot_virus.pin, sprot_virus.phr
and formatdb.log. The last of these lets you know how the BLAST formatting went.
The sprot_virus.p* files are your BLAST indices. You search against them by specifying the BLAST
database name sprot_virus.
Note:
If you were interested in the swissprot virus division, you would probably be interested in the trembl virus
division also. You could download and format that division as described above, and then search the swissprot
and trembl virus divisions separately, or as a single, virtual database. Alternatively, you could create a single
BLAST formatted database from the two fasta files using cat and makeblastdb:
cat uniprot_sprot_viruses.fasta uniprot_trembl_viruses.fasta |
makeblastdb -in - -out uniprot_viruses -dbtype prot -title “combined sprot and trembl virus divisions”
What is the best division to search against depends on what you need to accomplish.
78
Appendix C - Cheat sheet of basic Linux commands
bg
To send a suspended job to the background
cat fileName1
Output a file to the screen (see also more and less)
cat file1 file2 file3 > newfile
Append three files together and put the result in newfile
cat -nA file1
Output a file to screen, numbering all lines and revealing non-
printing characters
cd dirName
Change to directory dirName. Use cd .. to go up one dir or just
cd to go home.
chmod
To change the permissions or protection on a file, to allow
everyone to read a file (chmod a+r somefile)
clear
clear the terminal screen
cp fileName1 fileName2
create a copy of the file called fileName1 and call the copy
fileName2
cp fileName directoryName
copy the file fileName into a directory called directoryName
cp –R dirName1 dirName2
copy a whole directory called dirName1 and its contents into
another directory called dirName2.
date
Print the current date and time
df –h
File system information including space usage
diff file1 file2
Summarise differences between two similar text files file1 and
file 2. See also the graphical tool, meld
echo $NAME
Print the value of an environment variable called $NAME
emacs
A text editor, more powerful than gedit, but more complex.
evince
A command for viewing postscript or PDF formatted files
exit
Exit the current terminal
export NAME=value
Set the environment variable $NAME to “value”
fg
Brings a suspended or background job to the foreground
file fileName
Tries to determine what fileName is by looking at the contents
find -name “test*”
Scans for filenames matching a given glob pattern in the current
folder and subfolders. This command is tricky to use. To scan
the whole system for files, try locate.
gedit
The standard text editor
grep
Search for the occurrence of a pattern
groups or id
Show what groups a user is in.
head fileName
Show just the first few lines of fileName
history
List log of previous commands you have entered
jobs
Lists any suspended or background processes that you have
running. See also ps and pgrep
kill pid
Kill a process that is running where pid is the process id number
(see ps). Also consider pgrep and pkill.
last
Info about who has logged onto the machine recently
79
less
Type a file to the screen one page at a time (press q to quit,
spacebar for next page, b to go back a page)
ls
List the files in your directory
ls –l
List the files in your directory but with “longer” information.
(Add -h for more readable file sizes)
man command
For help about UNIX command “command”
man -k keyword
Lists all UNIX commands that mention the word “keyword”
mkdir dirName
Make a directory
more fileName
Type a file to the screen a page at a time (press q to quit, spacebar
for next page).
mv file1 dirName
Assuming dirName is an existing directory, move a file called file1
into a directory called dirName
mv file1 file2
Rename file1 and call it file2
nano
A basic text editor that runs in the terminal
passwd
Change your password
pgrep pattern
Find process names that contain the pattern. See also ps
pkill processname
Kill a running process using the process name. Be careful with
this! See also ps, pgrep and kill
pwd
Print the full path of your current directory
ps –u
List your current processes
ps –aux
List all processes on the machine. See also top
rm fileName
Delete a file
rm –rf dirName
Delete a directory and all its contents
rmdir
Delete an empty directory
screen
Run the screen manager (read the man page first!)
stat fileName
Show detailed info on fileName, similar to ls -l
tail
Show just the last few lines of a file. See also head.
tar -xvz -f fileName.tar.gz
Unpack a tarball from the file fileName.tar.gz
someCommand '''| tee fileName
Save output of someCommand to fileName and also print to
screen. Use instead of >fileName if you want to redirect but still
see the output.
top
List the processes running that are using the most CPU
touch fileName
Create an empty file (also updates file timestamps)
wc -l fileName
Count lines in fileName
which commandName
Reveal what will really be run when you give a command
w or who
List users currently logged on
yes
A very useful command ;-)
Ctrl-c
Stop (interrupt) a process
Ctrl-r
Interactively search in command log. See history
Ctrl-z
Suspend a process, see also jobs, fg and bg
80
81
Table of Contents
PART ONE: INTRODUCTION TO THE BIO-LINUX 8 SYSTEM……………………………………..1
Logging in and exploring the Bio-Linux desktop…………………………………………………………………………………………………1
Running applications……………………………………………………………………………………………………………………………………….3
Finding files and drives……………………………………………………………………………………………………………………………………3
Setting things up……………………………………………………………………………………………………………………………………………..4
Finding your way on the system…………………………………………………………………………………………………………………………7
The Root Folder………………………………………………………………………………………………………………………………………………..7
Using the command shell……………………………………………………………………………………………………………………………………8
Anatomy of a Command………………………………………………………………………………………………………………………………….9
Listing files in a directory………………………………………………………………………………………………………………………………10
Learning about Linux commands…………………………………………………………………………………………………………………….11
Basic Linux tips for filenames………………………………………………………………………………………………………………………..12
Getting the prompt back when running graphical applications from the terminal………………………………………………….12
Linux shorthand and shortcuts………………………………………………………………………………………………………………………..13
More Basic Linux Commands………………………………………………………………………………………………………………………….13
Changing directories……………………………………………………………………………………………………………………………………..14
Tab completion……………………………………………………………………………………………………………………………………………..15
Command history…………………………………………………………………………………………………………………………………………….17
Making a directory………………………………………………………………………………………………………………………………………..17
Office software………………………………………………………………………………………………………………………………………………..18
Using text editors……………………………………………………………………………………………………………………………………………..19
Nano……………………………………………………………………………………………………………………………………………………………19
Gedit……………………………………………………………………………………………………………………………………………………………19
Reading text files……………………………………………………………………………………………………………………………………………..20
An important note on line endings – CR and LF……………………………………………………………………………………………….21
Copying files……………………………………………………………………………………………………………………………………………………22
Linking to files…………………………………………………………………………………………………………………………………………………23
Removing files and directories………………………………………………………………………………………………………………………….24
Redirecting output to files………………………………………………………………………………………………………………………………..25
Piping output between applications………………………………………………………………………………………………………………….26
Diff, Grep and Sort………………………………………………………………………………………………………………………………………….27
Diff……………………………………………………………………………………………………………………………………………………………..27
Grep…………………………………………………………………………………………………………………………………………………………….27
Environment Variables…………………………………………………………………………………………………………………………………….29
Changing permissions on files and directories…………………………………………………………………………………………………..30
Some other useful information…………………………………………………………………………………………………………………………31
Copying and pasting text………………………………………………………………………………………………………………………………..31
The simple way to stop a process…………………………………………………………………………………………………………………….31
Putting a command to one side……………………………………………………………………………………………………………………….31
Logging out of a session………………………………………………………………………………………………………………………………..31
Clearing your terminal of text…………………………………………………………………………………………………………………………31
Accessing a running program or working with others interactively……………………………………………………………………..32
Accessing your machine – including a full graphical desktop - remotely……………………………………………………………..32
PART TWO: INTRODUCTION TO BIOINFORMATICS ON BIO-LINUX………………………..33
Documentation and Help for Bioinformatics Software on Bio-Linux…………………………………………………………………33
Bio-Linux Bioinformatics Documentation……………………………………………………………………………………………………….33
Help Functions within the Programs………………………………………………………………………………………………………………..34
Example data for this tutorial…………………………………………………………………………………………………………………………..34
Interface choices………………………………………………………………………………………………………………………………………………35
General points about working with bioinformatics programs……………………………………………………………………………36
Sequence formats………………………………………………………………………………………………………………………………………….36
File naming conventions in bioinformatics……………………………………………………………………………………………………….37
Naming files and the danger of over-writing previous results……………………………………………………………………………..39
A common problem: what is a text file and what is not………………………………………………………………………………………39
GZipped files in bioinformatics………………………………………………………………………………………………………………………40
EXAMPLES OF RUNNING BIOINFORMATICS PROGRAMS ON BIO-LINUX………………41
Analysing sequences with QIIME…………………………………………………………………………………………………………………….41
Preparation…………………………………………………………………………………………………………………………………………………..42
Assign Samples to Multiplex Reads………………………………………………………………………………………………………………..42
Processing sequences into OTUs…………………………………………………………………………………………………………………….43
Data to information……………………………………………………………………………………………………………………………………….44
Heatmap………………………………………………………………………………………………………………………………………………….45
Taxonomy Summary Charts……………………………………………………………………………………………………………………….45
Diversity………………………………………………………………………………………………………………………………………………………45
Alpha………………………………………………………………………………………………………………………………………………………45
Beta…………………………………………………………………………………………………………………………………………………………45
Inter-Sample Distance……………………………………………………………………………………………………………………………….46
Jackknifing & UPGMA……………………………………………………………………………………………………………………………..46
Analysing sequences with MOTHUR………………………………………………………………………………………………………………..47
Preparation…………………………………………………………………………………………………………………………………………………..47
Assign Samples to Multiplex Reads and Quality Filtering………………………………………………………………………………….48
Generating Alignment & Distance Matrix………………………………………………………………………………………………………..48
Classify Sequences………………………………………………………………………………………………………………………………………..49
Renaming Files……………………………………………………………………………………………………………………………………………..49
Clustering Sequences…………………………………………………………………………………………………………………………………….49
Generating OTU Table and Normalisation……………………………………………………………………………………………………….49
Classifying OTU…………………………………………………………………………………………………………………………………………..50
Converting the shared file to BIOM-format………………………………………………………………………………………………………50
Data to information……………………………………………………………………………………………………………………………………….50
Heatmap………………………………………………………………………………………………………………………………………………….50
Venn Diagram…………………………………………………………………………………………………………………………………………..50
Finding and running useful scripts…………………………………………………………………………………………………………………..51
Aligning sequences using MUSCLE………………………………………………………………………………………………………………….51
BLAST……………………………………………………………………………………………………………………………………………………………53
A few examples of ways to run BLAST, on Bio-Linux or otherwise……………………………………………………………….53
What this course covers……………………………………………………………………………………………………………………………..53
Why use BLAST on the command line?………………………………………………………………………………………………………53
General considerations for database searching……………………………………………………………………………………………..54
A very, very brief introduction to BLAST+………………………………………………………………………………………………….54
How a BLAST database looks on the file system………………………………………………………………………………………….55
A simple blastp search……………………………………………………………………………………………………………………………….55
Formatting BLAST output…………………………………………………………………………………………………………………………56
Handling multiple sequences……………………………………………………………………………………………………………………..57
BLAST searching using fasta files containing more than one sequence……………………………………………………….57
Processing multiple files using a foreach loop……………………………………………………………………………………………………57
Working with lots of BLAST results……………………………………………………………………………………………………………61
EMBOSS Programs…………………………………………………………………………………………………………………………………………62
Ways to run EMBOSS programs:……………………………………………………………………………………………………………….62
A comparison of the Jemboss and command line interfaces for EMBOSS programs…………………………………….63
Working with EMBOSS programs………………………………………………………………………………………………………………63
Using the EMBOSS command line……………………………………………………………………………………………………………..65
A very basic sequence assembly………………………………………………………………………………………………………………………..69
Quality Checking………………………………………………………………………………………………………………………………………69
Split Barcodes………………………………………………………………………………………………………………………………………….69
Clean Up………………………………………………………………………………………………………………………………………………….70
Assembly With Velvet……………………………………………………………………………………………………………………………….71
Assembly With Abyss……………………………………………………………………………………………………………………………….71
Assessing The Assemblies………………………………………………………………………………………………………………………….72
Adding Some Annotation…………………………………………………………………………………………………………………………..72
Artemis……………………………………………………………………………………………………………………………………………………………73
Ways to run Artemis:…………………………………………………………………………………………………………………………………73
Appendix A – BLAST references and documentation………………………………………………………………………………………..75
Web pages……………………………………………………………………………………………………………………………………………………75
References……………………………………………………………………………………………………………………………………………………75
Appendix B – Creating local BLAST databases………………………………………………………………………………………………..76
Obtaining local BLAST databases………………………………………………………………………………………………………………76
Building BLAST indices from local sequence files……………………………………………………………………………………….77
Appendix C - Cheat sheet of basic Linux commands…………………………………………………………………………………………79
Copyright and redistribution:
This document is the work of many authors over many years. Unless otherwise stated the material is Copyright NERC.
You may redistribute the complete document and its associated files without restriction in any format.
If you re-use substantial portions of this text in derivative works you must acknowledge the authors (CC-BY). We would
also appreciate you letting us know if you re-use our stuff.
If you use Bio-Linux for your science, please cite us! See the website for further info.
Part One: Introduction to the Bio-Linux 8 System
Logging in and exploring the Bio-Linux desktop
You can log into your Bio-Linux machine locally or over the network, on a fully installed system or a Virtual
Machine or on a system running Live from a USB memory stick or a DVD.
These course notes are written from the perspective of someone running the Live version of the system – that
is, having booted a PC directly from a USB memory stick and selected “Try Bio-Linux”. The main
differences for people working on an installed system will be the name of the account you are logged into
and what privileges that particular user account has. For example, the user of the Live system always has full
administrative privileges. So don’t worry if you find small differences between what is described here and
what you see on your system.
Please refer to our on-line document about various ways you can set up a Bio-Linux system:
http://environmentalomics.org/bio-linux-installation
If you are booting the machine from a DVD or a USB memory stick, when prompted, select
Option 1: Try Bio-Linux
After the system has started up, you will see the Bio-Linux desktop (Figure 1).
1
Figure 1: A view of the Bio-Linux 8 desktop
There are three icons on the desktop
●
Install Bio-Linux 8
On the Live System only – click this icon to start the Bio-Linux installer
●
Bio-Linux Documentation Opens a menu of links as follows:
◦
NEBC Homepage
Opens the NEBC home page in a web browser
◦
User Guide
Opens the Bio-Linux Userguide – a basic introduction to system admin
◦
Introductory Tutorial Opens the folder of Introductory Bio-Linux tutorials and data files
◦
Bioinformatics Docs Shows the NEBC Bio-Linux Bioinformatics Documentation System
●
Sample Data
Provides access to much sample data to help you in trying out new
software
On the left of the screen you will see the Dash, which is used to launch and organize applications. The
dash is populated by a column of large button icons. The Dash Button at the top with the Ubuntu logo
brings up the main Dash panel to find files and applications (see below). The other icons are, by
default, from the top:
1.
Open your home folder
2.
Launch Firefox web browser
3.
Launch Evolution mail reader
4.
LibreOffice Writer word processor
5.
LibreOffice Calc spreadsheet
6.
LibreOffice Impress presentation editor
8. Shell Terminal
9. Ubuntu Software Centre (find and install
apps)
10. System Settings and User Preferences
11. Virtual Desktop Switcher
12. Disks and USB removable media
13. Rubbish Bin (deleted files area)
On the top of the screen you will see the menu and panel bar (Figure 2).
Figure 2: The menu and panel bar, found at the top of the screen.
If you open an application window, the name of the active application will appear in the left portion of this
bar. If you move the mouse over it, a context menu for the active window will appear (like on Apple Mac).
The right portion of the bar has a panel of icons to control some system settings.
From left to right, the things you see in the panel area above are:
1. Network monitor and setup (the icon shown
indicates WiFi is active – you may see others)
2. Keyboard selector (defaults to UK keyboard)
3. Battery monitor (on laptops only)
4. Audio volume control
5. Wall clock (click it for a calendar)
6. System menu (includes access to system
settings and options to lock screen, switch
user, shut down, etc.)
2
Running applications
Clicking the Dash Button at the top left of the screen opens a panel where you can search for applications
and files on the system. This includes bioinformatics tools and any other applications you have installed.
Start typing either the application name or a keyword, or select the DNA icon at the bottom (circled in the
image) to see a list of bioinformatics tools and resources.
Figure 3: Searching for applications in the Dash
The applications found in the menu are by no means all the means all those found on the system. Most
bioinformatics applications need to be run from the terminal as detailed at length in this tutorial.
Finding files and drives
The file cabinet icon near the top of the Dash takes you directly to your Home folder.
Figure 4: Your home folder
3
Your personal Desktop, and folders in your Home area called Documents, Pictures, Videos, etc. are listed.
You can use these or else create your own folders as you wish.
The file browser provides convenient shortcuts to these directories in the left pane, even if you are viewing
another folder in the main panel.
Devices recognized by your system such as the disk drives, CD/DVD devices, USB sticks, etc. are listed at
the bottom of the left pane. Removable media can be ejected by clicking the icon next to the device name.
Networks resources can be accessed through the Browse Network icon. This includes Windows network
shares using the CIFS protocol and files on other Bio-Linux machines if you can access them via the SFTP
protocol. Browsing regular FTP servers is also supported.
Note: The Dash also has a file and media finder, as seen on the previous page, selected by clicking the
Ubuntu button at the top left to bring up the Dash console and then selecting one of the little white icons
from along the bottom of the window.
Setting things up
The System settings icon
allows you to customise
and administer your system (Figure 6) in various ways.
The Personal area is used for customising a variety of
attributes relating to your personal preferences.
The Hardware and System areas allow you to do things such
as configuring hardware drivers, changing firewall settings,
administering users and groups, and managing the packages on
your system.
Other features - Virtual Desktops etc.
The icon that looks like this:
allows you to switch
“virtual desktops”. Unlike Windows, Linux by default gives you access to multiple desktop areas. This
allows you to have windows open for different things in different virtual desktops. For example, if you were
working on writing an article, you could have programs relevant to that work open and visible via one of
these desktops. Meanwhile, you could have programs related to sequence analysis open on another desktop,
and so on. This is a great tool for keeping things organised during your working day. Clicking the icon will
zoom out to show an overview of all desktops. You can also switch quickly by holding down Ctrl+Alt and
tapping the arrow keys on the keyboard.
The Deleted Items Folder icon
(also commonly referred to as a Rubbish Bin or Trashcan) is the
bottom icon the Dash. This is where files deleted in the file browser usually end up. This gives you a chance
to salvage them if you deleted them by mistake. Deleting files on the system is covered in more detail in the
Removing Files and Directories section of this tutorial.
4
Figure 5: The System Settings Window
Exercise 1-1
a) Exploring the desktop
Take some time to explore the desktop. Look at the options under each of the icons covered in the previous
section, and try the various subsections in the Dash console.
Try clicking the icons on the desktop. Also try
using the right and middle mouse buttons when the mouse pointer is over the icons in the Dash and explore
the menus presented to you.
Try going to a different virtual desktop and starting up some windows/applications there. Try moving
windows off one desktop area and onto another.
b) Obtaining the example files for this tutorial
The sample files referred to in this tutorial can be found on the system as a compressed package file. You’ll
need to copy and unpack them before proceeding.
Copying the compressed file from the tutorials folder on the system
●
Double-click the Bio-Linux Documentation icon on the desktop
●
Open the Introductory Tutorial
●
Drag the bioinf_files.tar.gz file to the left and drop it over the word Home to copy it to your home
folder.
Note that a copy of this file can also be found online if you need it for some reason.
http://nebc.nerc.ac.uk/downloads/courses/Bio-Linux/bioinf_files.tar.gz
c) Extracting the files from the compressed tarball
The file you just downloaded is referred to as a tar file or tarball. Tar is a utility similar to Winzip; it
makes package of files. The extra .gz extension shows that the gzip method has been used to compress the
tar file.
Here are two equivalent options for how to unpack these files, one on the command line and one graphical.
Both should produce the same result.
Option 1 – extracting via the command line
●
Open a new terminal by clicking the icon in the dash —>
●
Type the following at the command prompt and press the enter key :
tar -xz -f bioinf_files.tar.gz
This command uncompresses and unpacks the contents of the tar file into your current working directory,
which in this case is your home folder. You should then see a new prompt, just like this:
5
(exercise 1-1 continued)
If you see an error, try typing the command again, making sure it is exactly as shown above including
spaces, hyphens, underscores, etc. If the error says “No such file or directory ” then check you really did
copy the file in step (b) above. You can confirm the extraction worked by looking in the file browser or
using the ls command.
Option 2 – extracting via a graphical interface
But don’t use this version – we’re trying to learn about the command line here!!
●
Open your Home Folder by clicking the file cabinet icon in the Dash.
●
Click the right mouse button over the bioinf_files.tar.gz file and select Extract Here.
d) Re-visiting the command above
Press the up arrow key while in the terminal. The previous command should re-appear for you to edit.
You can move the cursor left and right using the keyboard but don’t try to move it with the mouse – that
won’t work.
Edit the command by adding an extra ’v’ righ after ’-xz’ so that the full command reads:
tar -xzv -f bioinf_files.tar.gz
Hit the enter key to run it. You don’t need to scroll the cursor back the end before you do this. What is
the result this time?
The letters after the hyphens are parameters of the tar command: x means “unpack/extract”, the z means
“the file should be uncompressed with gzip”, the f indicates the file to unpack, and the v you just added
means “be verbose”. Therefore on this occasion you should have seen a list of the files being unpacked.
This is a common behavior for many Linux commands. If the command runs successfully without errors
it says nothing and just goes right back to the prompt. If you want the command to tell you what it is
doing, adding -v makes it verbose, otherwise you may assume that “no news is good news”.
The use of the cursor keys to re-visit commands is a major time-saver in the terminal and you must get in
the habit of doing this. The other major time-saver is Tab completion which we will come to soon.
e) Removing the compressed tarball
The unpacked files that you will be working with in this tutorial are now in a directory called bioinf_files.
You can remove the compressed tar file now if you wish. Again, this can be done via the command line or
using the graphical file browser but we’ll stick with the command line version. More details about how to
remove files from the system are covered in the Removing Files and Directories part of this tutorial.
●
Open a terminal window if you don’t have one already.
●
Type the following into the terminal, then press Enter:
rm bioinf_files.tar.gz
●
Enter “y” to agree when you are asked if you wish to delete the file.
6
Finding your way on the system
In Linux/Unix systems, documents are usually referred to as files, and file folders are referred to as
directories.
Your Bio-Linux file system can be thought of as a huge file folder (directory), inside of which are many
other file folders (directories). Inside these there are more nested file folders (directories), and so on. As in
the real world, where file folders can contain documents and other file folders, in Linux directories can
contain files and other directories. The hierarchy of folders is called the directory tree.
Your personal Home folder is one directory within the tree of directories that make up your Bio-Linux
machine. In your account, you can create other directories, store data, run programs, etc. A graphical view of
your home directory is available by clicking on the file cabinet Files icon in the Dash toolbar (Figure 5). This
opens up a window that shows the files and directories in your Home. The full name of this folder on the
system is /home/live, ie. a directory named after the login account, live, within the top-level directory named
/home, but the graphical file browser just shows it as Home.
Linux enforces file permissions depending on the login account. By default on Bio-Linux, your account has
the right to create, delete and edit files in your own Home folder, but not in other people’s accounts or in
system directories. You can be given permission (or give yourself permission, if it’s your system) to work on
files in such areas, and some information on setting file permissions is given later in this course. Your system
administrator or local IT support should be able to help you with sharing files if they are on a shared server.
You can use the graphical file browser to explore directory areas on the machine, and to move around in your
own files. It allows you to accomplish most typical file operation, including opening files and copying,
moving or deleting files using drag and drop or copy/cut/paste. To view areas of the system outside your
Home directory, click on Computer under Devices in the left hand pane to see the root directory of the
system.
Exercise 1-2
●
If you have not done so already, click on the filing cabinet Files icon near the top of the Dash
●
Double-click on the bioinf_files directory that you unpacked in Exercise 1-1, to view the contents
●
Investigate the options under the file browser menus. These appear on the bar at the very top of the
screen.
●
Click on the Computer icon in the left panel. This allows you to see the root directory – the base of the
whole filesystem hierarchy.
●
Find the folder called home and double click on it.
●
You should see a single folder called live listed. Select this to get back to your Home folder. If you
are not working on a live-booted system you should see a folder with your username, and other user
folders may also listed. A lock symbol on a folder would inform you that you do not have permission to
view the contents of that folder.
The Root Folder
The name of the base directory of the whole system, the one within which every file on the system is
contained, is the root directory. It is referred to by a single forward slash “ / ”.
When you work in the graphical file browser it shows your location relative to your Home folder, unless you
are looking at files outside your Home in which case it shows the location relative to the root. You should
have seen how the location changed as you browsed folders in exercise 1-2.
7
Figure 6: Location path for Templates folder in File Browser view.
Your personal home folder (actually called live but labeled as Home), sits within the directory called home
(with a small h), that contains homes for all users. This directory home is under the root directory,
represented by a tiny picture of a disk in the graphical view or a single forward slash in the terminal.
In other words, this information tells you where you are in system.
The location of a file or directory within the system is its path. If you are asked for the full path or absolute
path to a file, you need to provide a complete listing of all the directories traversed on the system to get to
that file. That is, you need to give the full path from the root directory to that file. The path is written by
starting with a forward''' slash “/” then listing the names of the directories you need to traverse in the system
to find that file, with each directory name separated with another forward slash.
To see the full path in the conventional format most command-line programs would expect you to provide,
press Ctrl-L while viewing a File Browser window. You should see something like this:
To summarize the syntax provided in Figures 9 and 10:
/home
home is a directory located within the root directory
/home/live
live is a directory within the directory home which is within the root
directory. This special directory will sometimes be shown as
Home, with a
capital H, because it is the home folder for the live user.
As another example: the full path to the file capsall.fasta, in the bioinf_files directory within the home
directory of the live user:
/home/live/bioinf_files/capsall.fasta
Often you can provide just the route from where you are on the system to where your file is; this is referred
to as a relative path. For example, if you are working in your home directory, the relative path to the file
mentioned above would be bioinf_files/capsall.fasta.
Keeping things organised
Everyone knows it, but it’s worth restating: if you start by creating a folder structure with meaningfully
named subfolders, name your files so that the names indicate the contents (or follow some defined naming
convention), and store your files in the right place, your life will be much, much easier!
Using the command shell
The real power of Linux/Unix systems is the command line.
A list of common Linux commands is provided in Appendix D of this document for reference.
Many programs and facilities are available through graphical options on Linux, but all programs and
facilities can be accessed by the command line, also known as the shell. Some tasks are easier, or more
appropriately done using graphical interfaces. Equally though, other things are easier or more appropriately
8
Figure 7: Location in graphical file browser given in text; this is the the full
path to the Templates folder in the home directory of the live user account.
done using the command line. Obvious examples include when you need to work with large numbers of files
or want to automate processes. First steps on the command line can be hard but the rewards are worth it (we
promise!)
Access to the command line is done through a terminal window.
You can open a new terminal by:
●
clicking the middle button on the terminal icon on the Dash toolbar
●
or, going into an already open terminal and typing a command to open a second terminal:
gnome-terminal &
Anatomy of a Command
Linux/Unix commands usually take the form shown in Figure 11. You’ve already seen a good example in
Exercise 1-1 part c.
The first word you supply on the command line is interpreted by the system as a command; that is –
something the system should do or a program to be run. Items that appear after that on on the same line are
separated by spaces. The additional input on the command line indicates to the system how the command
should work. For example, what file you want the command to work on, or the format for the information
that should be returned to you.
Most commands have options available that will alter the way the command functions. You make use of
these options by providing the command with parameters, some of which will take arguments. Examples in
the following sections should make it clear how this works. With some commands you don’t need to issue
any parameters or arguments. Occasionally this is because there are none available, but usually this is
because the command will use default settings if nothing is specified.
If a command runs successfully, it will usually not report anything back to you, unless reporting to you was
the purpose of the command (eg. ls). If the command does not execute properly, you will see an error
message returned. Some of these messages are hard to decipher until you have a bit of Linux experience but
ultimately they should tell you what has gone wrong.
Note: Items supplied on the command line separated by spaces are interpreted as individual pieces of
information for the system. For this reason, a filename with a space in it will be interpreted as two filenames
by default. How to get around this is is addressed in more detail later in the course.
Note 2: The use of the ampersand in the previous example, gnome-terminal &, is explained in a few pages
time. You would not put an ampersand on the end of most shell commands.
9
Figure 8: The Linux/Unix command line structure. Each part of a command is separated by
one or more spaces.
command
parameters
arguments
what I want to do
how I want to do it
on what do I want to do it
eg: tar
-xvz -f
bioinf_files.tar.gz
Listing files in a directory
The command ls lists files in a directory.
By default, the command will list the filenames of the files in your current working directory. When you first
open a shell this is your home directory.
If you add a space followed by a –l (that is, a hyphen and a small letter L), after the ls command, it alters the
behavior of the command: it will now list the files in your current directory, but with details about them
including who owns them, what the size is, and what kind of file it is. Information about this is shown in
Figure 11.
Exercise 1-3
a) Try browsing files in both the terminal and the graphical file browser:
●
Open a new terminal by clicking the terminal icon
●
In the terminal, type the command ls. Compare what you see listed with what you see in the graphical
representation of your Home directory.
●
Type the command ls –l and note the kind of information being provided and how it compares to the
graphical representation of your files.
●
In the graphical File Browser, click on the List option under the View menu, and compare this
information to that provided using the ls –l command.
●
In the console, type ls –l bioinf_files and also click on the bioinf_files folder in the graphical file
browser and compare what you are seeing.
You can also use glob patterns to identify file names by pattern.
*
an asterisk means any string of characters
?
a question mark means a single character
[ ]
square brackets can be used to designate a group of characters
More details about this are given in the Linux shorthand and shortcuts '''section below.
10
Figure 9: The detailed output of the command ls when run with the -l flag
drwxr-xr-x 6 manager
users 4096 2008-08-21
09:26 twilliams
-rw-r–r– 1
manager
users 9784 2007-03-19
14:09 hybInfo.txt
-rw-r–r– 1
manager
users 9784 2007-03-19
14:09 targets_v1.txt
-rw-r–r– 1
manager
users 7793 2007-03-19
14:14 targets_v2.txt
File
type
File
permissions
User
Group
File
size
Date and time
modified
Filename
(Exercise 1-3, continued)
b) Try these commands that use wildcards to match multiple files:
●
List all the files in the directory bioinf_files. that start with the letters tes
ls bioinf_files/tes*
●
List all the files in your directory that start with tes, and end in 1.embl, 2.embl or 3.embl
ls bioinf_files/tes*[123].embl
Learning about Linux commands
Most Linux commands have a manual page that provides information about the command and options that
can alter its behaviour. Many tasks can be made easier by using command options. A good rule of thumb is
to ask yourself whether what you want to do is something many others may have wanted to do. If the answer
is yes, then there may well be commands and options available to do that task.
Linux manual pages are referred to as man pages. To open the man page for a particular command, you just
need to type man followed by the name of the command you are interested in. To browse through a man
page, use the cursor keys (↓ and ↑). To close the man page simply hit the q key on your keyboard.
If you do not know the name of a command to use for a particular job, you can search using man –k
followed by the type of thing you are trying to do. An example of this is in exercise 1-3, part c).
(Exercise 1-3, continued)
c)
●
Look up the manual information for the ls command by typing the following in a terminal:
man ls
●
Skim through the man page. You can scroll forward using the up and down arrow keys on your
keyboard. You can go forward a page by using the space bar, and move backwards a page by using the b
key.
●
What does the -h option do? What about the -a option? What would running ls -lrt do?
●
Press the q key when you want to quit reading the man page.
●
Try running ls using some of the options mentioned above.
●
Look up some programs with man pages with the keywords “list directory”
man –k “list directory”
11
Basic Linux tips for filenames
•
Linux does not deal well with spaces in filenames!
Or to be more precise, Linux itself deals perfectly well with spaces and all manner of special characters in
filenames but many programs you’ll want to run on Linux do not, and if you’re talking about those files in
the terminal you’ll need to remember to quote them as described below. If you stick with letters, numbers,
hyphens, underscores and full stops, you will be fine.
Filenames with spaces in them are a common problem when transferring files to Linux from computers
running Windows, or Mac operating systems. Normally the simplest thing is to rename the files before you
work with them.
If you want to reference filenames with spaces in them, you will need to enclose the entire filename in
quotation marks so that Linux understands that the space is part of one single name.
Alternatively, you can “escape” the space using a backslash. For example, if I have a file called
my document
Linux will see this as two words, “my” and “document”.
But you could write either of the following to make it understand you mean a single file:
“my document”
my\ document
To avoid worrying about this, a common practice is to replace the space with an underscore. For example:
mv “my document” my_document
•
Everything is case sensitive
Linux systems consider capital letters different from lower case letters. The filename myFile is not the same
as the filename Myfile or myfile. You could have all three of these in the same folder.
There are some common naming conventions in place for biological data that you should try to follow. More
is said on this in the second part of this tutorial.
Getting the prompt back when running graphical applications from the
terminal
On an earlier page the command gnome-terminal & was suggested as a way to start a new terminal, but the
ampersand symbol was not explained. By default, when you run a command the shell expects that the
command will want to display text in the terminal window so it gets out fo the way until the command is
finished. Ending a command with & tells the shell to go immediately back to the prompt, not waiting for the
command to complete. This makes most sense when you expect the command to open up a new graphical
window. It is also possible, though more fiddly, to change your mind and get the prompt back while the
command is running.
Confusingly, some graphical programs will always signal the shell to keep going even if you omit the &
from the command. To demonstrate the default behavior we can use a very simple program called xcalc.
The following exercise will hopefully help you understand how all this works.
12
Exercise – understanding the function of “&”:
1. In a terminal, type the command xcalc
1. A basic calculator should appear. Try it out.
2. Try to type another command (eg. pwd) back in your terminal window.
3. Close the xcalc window and now see what happens back in the terminal.
2. Run xcalc again and leave it running. Now we’re going to get the terminal prompt back…
1. Back at the terminal, type Ctrl-z (ie. hold down Ctrl and tap z).
2. What message do you see? Hopefully you can run commands again.
3. Try using the calculator.
4. In the terminal, give the command bg and try using the calculator again.
3. Run xcalc once again with an ampersand after the command – xcalc &
Linux shorthand and shortcuts
Understanding Linux commands can seem daunting at first. This is in part due to particular characters (full
stops, question marks, etc.) having special meaning in commands. Once you learn the basics, these shorthand
characters are extremely useful and time saving.
The following incomplete list covers the symbols you will see most often today and describes their meanings
as you will most likely encounter them in this course.
*
matches any character appearing 0 or more times, also known as a wildcard
ls mydir/*
list all the files under the directory mydir
ls cat*
list all files starting with the letters cat
ls cat*hat
list all files starting with the letters cat and ending in hat
?
matches a single character
ls cat??hat
list all files starting with the letters cat followed by any 2 letters,
and then hat
.
the directory you are currently in – ie. the last one you moved to using cd
..
the directory one level above the one you are currently in, aka. the parent directory
~
shorthand for your home directory, eg. /home/live
$var
dollar sign indicates a variable substitution, even within double quotes
– see the section on environment variables
!
used for history substitution – not covered in this course
-
often seen preceding a parameter (eg. ls -l)
also, the command cd - is a special case meaning “cd to previous directory”
;
a semicolon can be used to separate two commands on the same line;
it is also used when writing loops – see p59
More Basic Linux Commands
13
A list of common Linux commands is provided in Appendix D of this document for reference.
Changing directories
The command used to change directories is cd
If you think of your directory structure, (i.e. this set of nested file folders you are in), as a tree structure, then
the simplest directory change you can do is move into a directory directly above or below the one you are in.
To change to a directory one below you are in, just use the cd command followed by the subdirectory name:
cd subdir_name
To change directory to the one above your are in, use the shorthand for “the directory above” ..
cd ..
If you need to change directory without worrying where you are now, you could explicitly state the full path:
cd /usr/local/bin
If you wish to return to your home directory at any time, just type cd by itself.
cd
And finally, you can type
cd –
This returns you to the last directory you were working in before this one.
If you get lost and want to confirm where you are in the directory structure , use the pwd command (print
working directory). This will return the full path of the directory you are currently in. Also by default in Bio-
Linux, you see the name of the current directory you are working in as part of your prompt.
For example, when you first opened the terminal in a live session you should see the prompt:
live@biolinux[live]
This means you are logged in as the user live on the machine named biolinux, and you are in a directory
called live. (Recall that the full path of your home directory is /home/live.)
If you move into the bioinf_files directory
cd bioinf_files
you would see the prompt:
live@biolinux[bioinf_files]
14
Exercise 1-4
●
Ensure you start in your home directory by using the cd command on its own. Change directory from
your home directory to the directory bioinf_files by typing
cd bioinf_files
●
Find the full path to where you are by typing
pwd
●
Type cd bioinf_files a second time. Why doesn’t this work?
●
Change directory into the /usr/bin directory by typing
cd /usr/bin
●
List the files in this directory.
This is the main directory of runnable programs on the system.
Some bioinformatics software can be found in here. Others are in /usr/local/bin
●
How can you get back to the bioinf_files folder from here? Can you work out how to do it with a
single command?
Tab completion
Tab completion is an incredibly useful facility for working on the command line.
The main thing tab completion does is complete the filename or program name you have started typing,
saving you typing time and reducing spelling errors.
For example, from your home directory, you could type:
cd bio
and hit the tab key.
If there is only one directory with a name starting with the letters “bio”, the rest of the name will be
completed for you. Here this would give you:
cd bioinf_files
The terminal environment on Bio-Linux is set up such that if there is more than one file with that
combination of letters, all the files will be shown to you. You can choose the one you want by typing more of
the filename, or by continuing to hit the tab key multiple times.
15
Exercise 1-5
●
Return to your home directory if you are not already there by typing cd
●
Type cd bio and use tab completion for the rest of the command. Only then press the return key.
●
You will now be in the bioinf_files directory.
●
Type ls testseq and use tab completion. This will show you a list of files that start with testseq.
You now have the option of completing the filename yourself, or “tabbing” through the filenames
available.
●
Press the tab key a number of times to see what happens.
●
Type ls c and press tab once to view the files available.
●
Type a further a such that you now have ls ca on the command line.
●
Now press the tab key again.
As you get faster with this, it will save you a lot of typing effort. Also, tab completion knows how to
escape spaces and other non-standard characters in file names for you.
Exercise 1-6
In the previous exercise tab completion was finding files in the working directory, but it can also help
you find command and program names because the system knows that the first word you type is going
to be a command name.
●
Type a on the command line and then press the tab key.
●
Add rte to the a so that you now have arte on the command line. Press the tab key again.
●
You will see that there is only one command that starts with these letters: artemis
For programs that might contain case sensitive names, tab completion can be especially useful.
●
Type bl on the command line and press the tab key. You will see a number of program names listed.
●
Keep pressing the tab key to see how the filenames will cycle through on the command line.
16
Command history
Previous commands you have used are stored in your history. You can save a lot of typing by using your
command history effectively. If you use the up arrow key when you are at the prompt in your terminal, you
can see previous commands you have run. This is particularly useful if you have mistyped something and
want to edit the command without writing the whole command out again.
You can also view past commands using the command history. By default, history will return a list of the
last 15 commands run. You can add a number as a parameter to the command to ask for longer or shorter
lists. For example, to return the last 30 commands run, you would type:
history -30
It is possible to “speed search” previously-executed commands by pressing the key combination:
Ctrl-r (ie. hold down Ctrl and tap the R key)
Then start to type. The command history will be scanned and the last matching command will be displayed
on the console. Type Ctrl-r repeatedly to cycle through the entire list of matching commands.
Exercise 1-7
●
Type history -n 10 on the command line.
●
Type Ctrl-r, then start typing ist.
Making a directory
To make a new directory, use the command mkdir (make directory). For example:
mkdir newdir
would create a new directory called newdir.
Exercise 1-8
●
Start in your bioinf_files directory.
●
Make a new directory called testdir
The graphical view of your account should immediately update to show this new directory.
●
Move into the new directory testdir
●
Move straight back into the bioinf_files directory using a single command. (see the shorthand and
shortcuts section above for a hint)
17
Office software
Leaving the command line for a short while… There are a number of word processors and spreadsheet
programs available for your system. In this course we will look at the LibreOffice suite of programs,
previously known as OpenOffice. This is an open source alternative to Microsoft Office and can be run on
both Linux and Windows.
The programs within LibreOffice can be run graphically from the icons in the Dash toolbar.
Exercise 1-9
●
Click on the LibreOffice Calc Spreadsheet icon.
●
Under the File menu, click on Open.
●
Look inside the bioinf_files directory.
●
Open the file called example.xls.
●
Make a few changes and save the file using the Save or Save As… options under the File menu.
●
Close LibreOffice Calc by choosing Exit from under the File menu.
18
Text files, Word Processors and Bioinformatics
Documents written using a word processor such as
Microsoft Word or LibreOffice Write are not plain text
documents. If your filename has an extension such as
.doc or .odt, it is unlikely to be a plain text document.
(Try opening a Word document in notepad on Windows if you want proof of this.)
Word processors are very useful for preparing printed documents, but we recommend you do not use them
when working with bioinformatics data files.
There is a handy command called simply file that will inspect a file and tell you what it looks like. If you
run this on a FASTA file it will say “ASCII text” because FASTA is a plain text format. If it says "binary
data“ or ”HTML“ or ”OpenDocument Text" or whatever then this is not actually a FASTA file, even if it
resembles one when viewed in soem applications.
Word processor
Spreadsheet
Presentation editor
Figure 10: LibreOffice Applications in the dash toolbar
Using text editors
Plain text files are important, both as input to bioinformatics programs and as input or configuration files for
system programs. We highly recommend that you learn to use a text editor to prepare and edit plain text
files.
There are a number of different text editors available on Bio-Linux. These range in ease of use, and each has
its pros and cons. In this practical we will briefly look at two editors, nano and gedit.
Nano
Pros:
very simple – for example, most command
options are visible at the bottom of the
window
can be used right in the terminal without
graphical support
fast to start up and use
supports syntax hilighting
Cons:
due to simplicity, lacks some advanced
features – eg. line numbering, search by
pattern
it is not completely intuitive for people who
are used to graphical word processors
Gedit
Pros:
very easy to start using
supports syntax hilighting
looks similar to a word processor, but is in
fact a powerful text editor.
has many useful plugins that you can easily
install
Cons:
it is a graphical program and cannot be run
from a text-only environment
it is slightly slower to start up than non-
graphical editors
for real power users, it’s not a match for Vim
or Emacs
As most users will work on Bio-Linux using a graphical environment, we will only use Gedit in the exercise
for this section.
Exercise 1-10
Editing a file with Gedit
To start up Gedit, you can use the command line, or find it in the Dash menu. Choose one of the two
methods to open gedit:
Command line
Type gedit &
Graphical menu
Click the Dash Home at the top left of the screen, then type edit and click the Text Editor icon.
●
Type three or four lines of text into the gedit window.
●
Save your file using the save option under the File menu (note, you have to move your mouse right to
the top of the screen to see this) or simply click the Save button on the Toolbar. Save it as
myfirstfile.txt in your testdir directory.
19
Exercise 1-10 continued
To save a file under the testdir directory, you may have to click on the drop down arrow to Browse for
other folders. This will expand this section into a File Browser like the one you’ve seen in past exercises.
Simply browse through to the location testdir is in and click the Save button.
●
Add a new line to your file and save the file again using the Save As… option under the File menu.
Save this file as mysecondfile.txt in the testdir directory.
●
Add more functionality to gedit by choosing the menu options; Edit → Preferences. A pop-up box
will appear with 4 tabs:
View
Editor
Font & Colours
Plugins
Seeing the line numbers in a file helps to keep track of your position in that file. We will enable line
numbers here.
●
On the View tab enable Display line numbers. Now you can see the line numbers on the left.
●
Next, click on the Plugins tab and enable the Change Case and the Document Statistics plugins.
Browse around the other plugins and see what functionality they provide.
●
Under the Tools menu, click on Document Statistics.
●
Try out the other newly added plugin, by selecting a piece of text from the document you are editing
with the mouse and click on the Edit menu. Hover the mouse over the Change Case menu and choose one
of the options you are presented with.
●
Change part of one of the lines in this file and save it again using the Save As… option under the File
menu. This time save it as mythirdfile.txt in the testdir directory.
●
Quit gedit by choosing the option Quit under the File menu.
Reading text files
There are many commands available for reading text files on Linux/Unix. These are useful when you want to
look at the contents of a file, but not edit it. Among the most common of these commands are cat, more, and
less.
cat simply prints out a whole file in the terminal, which is often a very useful thing to do. However, cat
streams the entire contents of a file to your terminal at once and is thus not that useful for reading long files
as the text streams past too quickly to read. (Note – cat is short for concatenate because if you give it
multiple files it will string them together in order before printing them.)
more and less are commands that show the contents of a file one screenful at a time. less has more
functionality than more; specifically it can scroll backwards, hence the name.
With both more and less, you
can use the space bar to scroll down the page, and typing the letter q causes the program to quit – returning
you to your command line prompt.
Once you are reading a document with more or less, typing a forward slash / will start a prompt at the
bottom of the page, and you can then type in text that is searched for below the point in the document you
were at. Typing in a ? also searches for a text string you enter, but it searches in the document above the
point you were at. Hitting the n key during a search looks for the next instance of that text in the file.
20
With less (but not more), you can use the arrow keys to scroll up and down the page, and the b key to move
back up the document if you wish to.
Exercise 1-11a
●
Move into the bioinf_files directory.
●
Read the file hsy14768.embl using the commands cat, more and less.
Don’t forget that tab completion can save you typing effort.
cat hsy14768.embl
more hsy14768.embl Use the spacebar to scroll down
Press q to quit.
less hsy14768.embl
Use the spacebar to scroll down, b to go up a page, and the up and
down arrow keys to move up and down the file line by line.
Press the / key and search for the letters sequen in the file.
Press the ? key and search for the letters gene in the file.
Press the n key to search for other instances of gene in the file.
In almost all cases, if you want to look at a file in the terminal you want to use less. The cat command is
more usually used in conjunction with other commands or when you actually want to concatenate files. The
more command does nothing that less can’t do.
An important note on line endings – CR and LF
There is one major gotcha when working with text files, and it stems from a decision made way back in the
olden days of line printers. To print a text file on such a device, you would send the raw text file directly
down the serial line to the printer and at the end of each line you sent two control codes, one to advance the
paper (line feed) and the other to move the print carriage back to the start (carriage return).
In MS-DOS, later Windows, both these codes were embedded in standard text files at the end of every line.
In UNIX, and later Linux, a single LF character is used to indicate a newline. On old Macs it was a single
LF. New Macs use the UNIX convention, so text files with single LF newlines are rare.
Many programs on Linux are written to deal with all these conventions – they just helpfully regard any
combination of CR and LF as meaning “next line”. Others are not, and will either complain the file is invalid
or worse will try to process the extra characters as meaningful data and produce nonsense results. You don’t
need this hassle so, much like we recommended removing spaces from filenames above, we also recommend
ensuring all your text files are in order before attempting any bioinformatics on them. The next exercise
shows how you might do this.
21
Remember the man pages
There are many command line options available for each of the above commands, as well as
functionality we do not cover here. To read more about them, consult the manual pages:
man cat
man less
As you’ll see, the manual pages are actually displayed for you using less.
Exercise 1-11b
●
In Gedit, open the file hexaseqs.list which is provided in bioinf_files.
●
Without editing the file, save it as a new file named hexaseqs_crlf.list but on the Save As dialog switch
the Line Ending option to Windows.
●
Try these commands in order:
○
file hexaseqs.list hexaseqs_crlf.list
○
ls -l hexaseqs.list hexaseqs_crlf.list
Note the difference in file sizes in the fourth column
○
cat hexaseqs.list
○
cat hexaseqs_crlf.list
○
cat -A hexaseqs.list
○
cat -A hexaseqs_crlf.list
●
Now run these. Remember that the * in a filename is a shorthand to match multiple files at once. Don’t
worry about the specific meaning of the sed command but do ensure you type it exactly like as shown.
○
sed -i “s/\r//” hexaseqs*.list
○
file hexaseqs*.list
In summary:
○
The line endings problem is a historical annoyance that won’t go away.
○
The file and cat -A commands are the quickest ways to detect troublesome CRLF line endings.
○
Using Gedit and saving with the Unix/Linux mode is the simplest and safest way to remove
them.
○
The command shown above using sed (sed is a handy tool but we don’t really have time to cover
it in this course) can quickly strip all the CR characters from multiple files in one go. It’s safe to
run this on any regular text file, but if you run it on, say, and Excel file or an image or a .zip or
.tar.gz file then the file will effectively be destroyed.
Copying files
The basic command used to copy files using the command line is cp. At a minimum, you must specify two
arguments: the name of the file to be copied, and where you wish to copy the file to.
The main things to know about using the cp command are:
•
if you provide the name of an existing directory as the second argument, the file named in the first
argument will be copied into that directory.
•
otherwise, it will be assumed that the second argument is the new name to be used for the copy you
are making, whether the name corresponds to an existing file or not
•
if you provide more than two arguments to cp, the final argument needs to be the name of a directory
that already exists and all the preceding arguments need to be files that will be copied to the
directory
Examples (try these in the bioinf_files folder if you like, or go straight on to 1-12):
cp unknown.fasta my_new_file.fasta - clones unknown.fasta with the new name my_new_file.fasta
22
cp unknown.fasta my_new_directory - probably not what you wanted! It just makes another file.
mkdir an_actual_directory
cp unknown.fasta an_actual_directory - copy unknown.fasta into an_actual_directory you just made
cp *.embl an_actual_directory - copy all the .embl files into the new directory in one go
To copy whole directories, with all the subfiles and subdirectories, use the –R option, (meaning recursive).
cp –R an_actual_directory foo - copy directory and its contents as a new directory, foo
The Linux shorthand for “this directory right here” (a dot . ) and “the parent directory” ( .. ) comes in handy
when copying:
cd foo
cp –R ../blastdb .
copy blastdb from the directory above and put the copy here in foo
Make sure you leave a space between the directory name and the final dot.
Also useful is the shorthand for someone’s home account. e.g. instead of having to know and type the
location of their account, you can use ~username In the case of your own account, you use just the ~
symbol, followed by a / if you want to specify any subdirectories in your account.
(note the next two examples don’t work on the demo system as the files are not in place)
cp ~user2/somefile .
copy the file somefile from user2’s home directory to my
current working directory. Note that you need the appropriate
permissions to do this!
cp ~/Documents/mytext . copy the file or directory called mytext from within my Documents
directory to my current working directory.
Exercise 1-12
●
Move into your directory testdir from exercise 1-8.
●
List the files in this directory.
●
Make a copy of myfirstfile.txt called test.txt
●
Make a copy of mythirdfile.txt called myfourthfile.txt.
●
Make a directory called subdir.
●
Copy mysecondfile.txt into subdir
●
Copy all the files that have the letters fil in the name into the subdir directory.
●
Move back into the bioinf_files directory
●
Copy all the files that start with the letters tes and end in .embl into the directory subdir.
Linking to files
Sometimes you want to access a file or directory at a different location but you don’t actually want to copy it.
For example if you have a data file in a system folder or network drive that you want to be able to access
quickly from your desktop, but you don’t actually want the entire file to be copied to your desktop folder:
23
ln -s /usr/local/bioinf/sampledata/nucleotide_seqs/multiple_seqs.fasta ~/Desktop/multiple.fasta
If you now try to open multiple.fasta in any application (eg. Gedit), you will see the data from the linked file
as if you accessed it directly. If you write to the link you will be writing data straight to the original file (but
in this case you will not have permission to do so).
You can examine links using the long output mode of ls.
ls -l ~/Desktop/multiple.fasta
lrwxrwxrwx 1 live live 35 2011-05-12 11:46
/home/live/Desktop/multiple.fasta ->
/usr/local/bioinf/sampledata/nucleotide_seqs/file1.fasta
The initial letter ’l’ shows we are dealing with a link. Links do not have their own permission settings so ls
shows them all as enabled, but links do have an owner depending on who created them. The target of the
link is shown last. The target can be any file, directory or even another link. Note that Linux will not stop
you from making a link where the target is non-existent or inaccessible, but ls will help you to spot these
“dangling links” by colouring them in red.
Removing files and directories
The key difference between deleting something from the command line and using the graphical file browser
is that in the first case the file vanishes immediately, but in the second it will be stored for a while in the
Rubbish Bin and can be retrieved.
Option 1: Using the command line (effect: deletes files from the system)
To remove a file or files, use the rm command followed by the name of the file(s) you wish to delete.
rm file1
rm file2 file3 file4
rm foo/*
remove all files in foo but not the directory itself
To remove an empty directory, you can use the rmdir command:
rmdir thisdir
If that directory contains any files, you will not able to delete the directory using rmdir until you have
deleted all the files within it. To delete a directory and all the files in it at the same time, use the rm
command with the option -r (for recursive)
rm –r fulldir
If you use the above command on Bio-Linux, you will be prompted to confirm that you wish to delete each
file. While sometimes useful, this can be tedious. If you are certain that you want to delete all the files in that
directory, as well as the directory itself, then you can combine the recursive flag with the force (-f) flag
rm -rf anydir
So if you are 100% confident that you will never make a mistake, you can use rm -rf for all deletions, but
for mere mortals it is good practice to use the more specific commands, as this can mitigate mistakes.
Option 2: Using the File Browser (effect: moves files into the Rubbish Bin)
If you are in the graphical file browser, just find the file you wish to remove, right click on it and choose the
Move to Rubbish Bin option or else press the Delete key on the keyboard. Note that this file will not be
24
removed from your system, only hidden, and can be retrieved via the Rubbish Bin icon in the bottom right of
the screen.
If you were deleting the file to make space, you now have to empty it from the Rubbish Bin to actually get
the disk space back. You can remove the file permanently in one go by holding down the Shift key on your
keyboard and while keeping this key depressed, pressing the Delete key. A message box will pop up asking
you to confirm that you really wish to permanently delete your file.
Exercise 1-13
●
Move into the testdir directory.
●
Delete mythirdfile.txt using the command line
●
Delete myfourthfile.txt using the graphical file browser. Is the files now sitting in the Rubbish Bin?
●
Back on the command line, move back into your Home directory.
●
Then delete myfirstfile.txt from testdir without moving back to the testdir directory.
●
Delete the entire testdir/subdir directory without being prompted about the deletion of each file
individually.
Redirecting output to files
You have seen how the 'cat command can take the contents of a file and put it straight into the terminal, but
we can also do what is essentially the opposite and capture output that would normally go to the terminal and
put it in a file. This is done by the redirection operator >. For example:
ls > file_list.txt
In this case the output of ls will not appear on the screen but you will see a new file called file_list.txt. If
you cat this file or open it in gedit you’ll see the file list. Note that the result is no longer coloured, as there
is no way to represent colour information in a plain text file, and has been formatted into a single column list,
but otherwise is identical.
25
Notes on Reading, Copying and Removing Files and Directories
On Bio-Linux the commands cp, mv and rm have been aliased to cp –i , mv –i and rm –i respectively.
This means the system will ask you if you really mean to overwrite files should the situation arise with cp or
mv, or delete the file you have just asked to delete when using rm. You must respond with a y or Y if you do
wish to proceed. Hitting any other key will cause the action you requested to be ignored.
You cannot assume that any other Linux/Unix systems you work on will be configured this way, but you can
always set these settings yourself.
Piping output between applications
A remarkably powerful facility on the Linux command line is the ability to take the output of one command
and use it directly as the input to another command. This is referred to as piping the output of one command
into another command.
The vertical bar symbol used for this is called a pipe and looks like: |
Standard UK PC keyboards have the pipe symbol on the same key as the backslash symbol, at the bottom,
left hand side of the keyboard. So pressing the Shift key and the backslash key together will give you the
pipe symbol.
On some keyboards, the pipe symbol is at the top left hand side, on the same key as the backtick. To type a
pipe symbol on such keyboards, hold down the key Alt Gr and hit the back tick ( ` ) key (left of the number
1 key).
An example of when you want to use a pipe would be if you wanted to list all the files in a directory, but
there are too many to fit on a single page. You probably saw this when you listed the contents of /usr/bin
back in Ex. 1-4.
You can pipe the output of the ls command (a list of files) into the less command, which will allow you to
view the list page by page. To list the files in /usr/bin and view them page by page, the command would be:
ls /usr/bin | less
Another useful command to use with pipes is the wc command, which stands for wordcount. By default, wc
returns the number of newlines, words and bytes in a file. Or you can tell wc to return just the number of
lines by using the -l parameter (see the manpage for wc).
For example, you could find out how many files you had in a directory by typing:
ls | wc -l
26
Diff, Grep and Sort
In this section, we look briefly at three very useful commands: diff, grep and sort. As with all the commands
covered today, we recommend that you read the manual page for more information about how these work
and what options are available.
Diff
diff compares files line by line and reports the differences between the files. In fact, diff can be used for
more involved tasks as well, like comparing the contents of directories. This can be very useful when you are
looking for changes that you or someone else has made.
Exercise 1-14
●
Move into the testdir directory.
●
Type diff test.txt mysecondfile.txt to see what diff reports to you.
●
Type cat mysecondfile.txt | diff - test.txt
In the above command the hyphen (-) refers to the information being given to diff through the pipe. That is,
the information resulting from the command cat mysecondfile.txt is put directly into the diff command.
Obviously, in this instance it would be easier just to give the name of the file, mysecondfile.txt, but there
are many instances where being able to use – to mean “what I am sending in via the pipe” can be useful.
Grep
grep stands for global regular expression print; you use this command to search for text patterns in a file
(or any stream of text). Eg try this.
grep “adge” /usr/share/dict/words
You can also use flexible search terms, known as regular expressions, in your grep searches. You have
already used glob pattern expressions in this practical, but regular expressions are somewhat different and
more powerful. For example, when you listed all files with the pattern tes*embl* you were using a glob
pattern comprising explicit characters (e.g. tes) and special symbols (* meaning any character or characters).
The equivalent in grep would be “tes.*embl.*” where the period signifies any single character and the *
signifies any number of repeats.
Therefore to convert from a shell glob pattern to a regular expression replace each * with .* and each ? with .
. You also need to enclose the expression in quotes to tell the shell not to try and interpret it as a glob.
Unmodified glob patterns fed to grep but will not work as intended. For example the pattern tes* in grep
means te followed by any number of s characters in sequence (te, tes, tess, tesss, …). The question mark
now signifies optionality – so tes? means te followed by zero or one s character (te, tes). Regular
expressions are found in several places other than grep, most notably in the Perl scripting language. The full
syntax is extensive and powerful but is beyond the scope of this course, so back to the grep command itself…
grep requires a regular expression pattern as a parameter, and prints all the lines in a file containing that
pattern.
grep is especially useful in combination with pipes as you can filter the results of other commands.
For example, perhaps you only want to see only the information in an EMBL file relating to the origin of the
sequence, that is, the DE line. You do not need to search the file in an editor, you can just grep for lines
beginning in DE, as in the next exercise.
27
Exercise 1-15
●
While in the bioinf_files directory, type the command: grep “DE” hsy14768.embl
What is this command doing?
Can you see why the above command results in the output you see?
An explanation of this command can be found below this exercise box.
●
Try the commands: grep “^DE” hsy14768.embl and grep -x “DE.*” hsy14768.embl
What are the ^ symbol and the -x parameter in these commands doing?
Check the manpage for grep to be sure.
●
Try the command: cat hsy14768.embl | grep “^DE”. Does that do what you expected?
●
Move to your home directory and type ls –lR
Read the manual page for ls if it is not clear what this command returns.
●
Use the above command with a pipe and a grep command to search for files created or
modified today.
●
List the files in the bioinf_files directory and use the grep command to look for those containing the
characters d4.
The first command in the previous exercise searches all the text in the hsy14768.embl file and returns the
lines in which it finds the letter D followed by the letter E.
The second command in the exercise also returns lines in the file that have a letter D followed by a letter E,
but only where DE is found at the beginning of a line. This is because the ^ symbol means “match at the
beginning of a line”. The $ symbol can be used similarly to mean “at the end of a line”. These are known as
anchors. Passing the -x flag to grep tells it to automatically anchor both ends of the search pattern.
What this anchoring does in the example above is return to you just the organism information in the embl
file. This is because none of the other lines returned in the previous command started with DE, they just
contained DE somewhere in them. This is an example where knowing how information is stored in an given
file, along with a few basic Linux commands, allows you to retrieve information quickly.
Another common example is counting how many sequences are in a set of multi-fasta files. We can do this
with pipes between the commands cat, grep and the ever-handy wc, which here we use to count lines found
by grep.
cat *seqs.fasta | grep “^>” | wc -l
Each sequence in a fasta file starts with a header line that begins with a > . The above command streams the
contents of all files matching the glob pattern *seqs.fasta through a search with grep looking for lines that
start with the symbol > . The quotes around the pattern ^> are necessary, as otherwise it is interpreted as a
request for redirection of output to a file, rather than as a character to look for. As before, the ^ symbol
means “match only at the beginning of the line”.
The output of this grep search is sent to the wc command, with the -l indicating that you want to know the
number of lines – ie. the number of headers and by implication the number of sequences.
So a synopsis of the command above is: Read through all files with names ending seqs.fasta and look for all
the header lines in the combined output, then count up those lines that matched and return the number to
screen.
We cover sequence formats later on in part 2 of the tutorial.
28
Environment Variables
We have seen that the way commands run can be modified by the options passed on the command line.
Some commands also read values called environment variables which affect their behaviour. Environmental
variables are set within the shell via the export command and are passed to any processes you run. This is
useful when you want to set some parameter that is common to all invocations of a command, or applies
across several commands. For example, your favourite text editor may be, say, Gedit, or Nano, or Vim, or
Emacs. In the shell you can say:
export EDITOR=vim
Now any command that wants to run a text editor knows what your preferred editor is. Within the shell you
can get at the current value of en environment variable by prefixing it with a $ sign, eg.
echo $EDITOR
prints the current value of the EDITOR environment variable to the screen
The printenv command dumps all environment variables. Note that environment variables are only set in
the current shell and are not saved by default, so if you run a command in another terminal or close and
restart the terminal any values you set will be lost. For information on making the settings permanent by
editing your .zshrc file see the user guide under Supported Shells.
Exercise 1-16
•
Give the command: export VAR1=hello (with no spaces around the = sign) then:
◦
echo $VAR1
◦
echo $ VAR1
◦
echo “$VAR1”
◦
echo ’$VAR1’
•
Start a new terminal window by typing: gnome-terminal &
◦
Within this new terminal: echo $VAR1
•
Start a second new terminal by right-clicking the icon in the Dash and selecting New Terminal
◦
Within this new shell: echo $VAR1
•
Go back to the original shell window
◦
unset VAR1
◦
echo $VAR1
•
Has this affected either of the other two shells you started? Check them:
◦
echo $VAR1
Environment variables are inherited when one process starts another, much like genetic material is inherited
when a cell divides. Hopefully this explains the behaviour you see in the exercise above. When you start a
terminal from en existing shell it inherits the environment from that shell. When you start one from the
system menu it inherits just the base system environment. Furthermore, once a program is running no
external program can modify its environment variables.
29
Changing permissions on files and directories
Every file on the system has a set of permissions on it that dictate who on the system can read, change or
delete, or execute the file. By default, all the files you create in your account are readable, changeable or
executable by you. However, you can grant other users permissions to access parts of your account if you
wish.
Below is some basic information about file permissions. Since there is only one user on the live system this
isn’t really relevant to your current setup. If you are working on a shared system and want to set up access to
your files for other people on the system, please get advice from your system administrator.
The command to change permissions is chmod. You have to specify who you are modifying the permissions
of, what the new permissions are, and what file or directory to act on.
The format of the chmod command is:
chmod who ± permissions filename(s)
who can be:
u
means user and refers to the owner of the file
g
means group, and refers to the group the file belongs to
o
means others, everyone on your systems apart from those above
a
means all three, i.e. user, group and others
permissions can be:
r
means read permission
w
means write permission
x
means execute permission
Each user has a default group and possibly extra group memberships. Use the id command to view your
group memberships. When you create a new file it will be owned by you and by your default group. If you
are a member of additional groups, you can switch the file to any of those groups using the chgrp command.
(Please refer to the manual pages for the commands chown, chgrp and chmod for more on this topic.)
For simplicity, let us assume that you and a co-worker have both been put in the default group labusers and
wish to share your data files found in ~/bioinf_files.
chmod a+x ~
give permission to anyone to execute, in this case, so
that they can move through, your home directory.
chmod g+rx ~/bioinf_files
give permission to people in the group to access files in the
bioinf_files directory under your home directory, including
listing the files with ls
chmod g+r ~/bioinf_files/*
give permission to people in the group to read the files in the
directory
The first command could have been “chmod g+x ~”. This would unlock your home directory only to users
in the labusers group. However, enabling access for anyone is generally safe, as long as permissions on the
files and subfolders prevent anyone from actually accessing them, and unless you set a+w in addition to a+x
nobody but you will be able to list the files in your home directory.
30
Some other useful information
Copying and pasting text
Most Linux applications, including the shell terminal windows, have Copy and Paste options in the Edit
menu or available in the pop-up menu when you click the right mouse button. You can copy text within
the application or between different applications. There is also a quick way to copy text within the
terminal by highlighting text to select it, and using the middle mouse button to paste the text.
The exact way to select, copy and paste text from within a terminal windows depends on how your mouse
has been set up. Normally you would highlight text by dragging the mouse across it with your left mouse
button depressed to copy the text, and paste by clicking the middle mouse button (or the two outer mouse
buttons pressed simultaneously). Note that within the terminal it doesn’t matter where you click the middle
mouse button – the text will always be inserted at the current cursor position.
The simple way to stop a process
Sometimes a command or program you run in the terminal goes on too long, or is obviously doing something
you did not plan. If there is no obvious way (such as a menu option or button) to stop the program running,
try using Control and c (more commonly written as Ctrl-c). i.e. hold down the Control key and hit the c
key. This requests the program to stop immediately, though the program may ignore the request.
Note that this is the same key combination used in most graphical applications for copying text. Remember
that highlighting text in a Linux terminal automatically copies it into the buffer – you don’t need to press
Ctrl-c before pasting with the middle button.
Putting a command to one side
Sometimes, you are in the middle of typing a long command, and you suddenly realise you need to do
something else in the terminal, like list the current directory contents or check the manpage, before you run
the command. Z-shell provides a handy shortcut for this: Alt-q. When you press Alt-q the current
command disappears and you have a new empty prompt, but the unfinished command has been remembered
and will reappear with the next prompt ready for you to edit and run it.
An alternative is to hit Ctrl-c. Within the shell, Ctrl-c does not cause the shell to exit but it does cause the
current command to be abandoned and a fresh prompt to appear. Unlike with Alt-q the unfinished command
will still be visible in the terminal display so you can select it and paste it back in with the middle button if
you decide you want it after all. (Try it!)
Logging out of a session
To logout, you can press the Power Icon on the far right of the top taskbar (Figure 2) and choose the Log
Out option.
To shut down the machine, you can choose the Shut Down option on the same menu. If you are working on
the console of a machine with users apart from you, then please check with your system administrator before
powering down the machine. Other people might want to log in remotely.
Clearing your terminal of text
Your terminal windows can fill up with lots of text, and it can become difficult to see the information you
want because of all the clutter. You can clear the terminal window by typing
clear
31
Accessing a running program or working with others interactively
If you just run a job and then close down the terminal you ran it from, normally the job will be terminated. It
would be nice to be able to leave a long job running and be able to log out and then log back in again to see
how it is progressing. This is especially true if you log in remotely via SSH and experience network
disruptions, or if you run programs that can take quite a long time, but ask you for input periodically.
Luckily, there is a tool that makes it possible to leave programs running with no danger of them terminating
if you log off or your terminal is closed. In addition, when you log back into your system, either locally or
remotely, you can “re-attach” to your earlier session so it feels like you are picking up where you left off, in
the same window you were running your program from.
The utility that allows you to do this is called screen. It must be run before you start running other programs
in your window. Screen can also allow two people on different machines to work in the same session – i.e.
Real time collaborative editing is possible with screen.
Unfortunately, how to work with screen is beyond the scope of this course. However, the link below provides
a useful beginners tutorial about screen and multi-user sessions:
https://www.linode.com/docs/networking/ssh/using-gnu-screen-to-manage-persistent-terminal-
An extensive list of command options can be found in the screen manpage (ie. type man screen).
Accessing your machine – including a full graphical desktop - remotely
Bio-Linux is set up for secure remote access. We can’t demonstrate this on the Live system but it is well
worth knowing that if you have an installed Bio-Linux system you can connect to it securely over the
network, so long as your account is enabled in the ssh group and you have network access to the machine (ie.
not blocked by a site firewall)
You can connect to your (installed) Bio-Linux system remotely using X2Go software. If you download an
X2Go client to another Windows, Linux or Mac system, you can connect to an installed Bio-Linux system
and run a full, graphical, desktop session remotely. Further details on how to do this can be found on the
website at:
http://environmentalomics.org/bio-linux-remote-access
Note that due to limitations of the remote protocol, X2Go will use a fallback desktop “MATE” session which
is slightly different to the default “Unity” desktop environment described in this tutorial.
32
There are many useful commands available on Linux and we cannot begin to cover them in this course. We
recommend that you consider buying a book to help you learn how to use Linux efficiently.
Part Two: Introduction to Bioinformatics on Bio-Linux
This section of the tutorial introduces you to running bioinformatics software on Bio-Linux, including how
to find out what is available for particular types of bioinformatics tasks, some options you have for running
programs on the system, and where to find documentation about the software on the system. This course
does not cover the detailed use or understanding of any particular piece of software.
You should read through the general information in the next few pages, then look at which specific programs
are of most interest to you.
The main points we hope you take away after completing this section of the tutorial are:
a) You can discover and run bioinformatics tools even if you have not explicitly been taught
how to use them.
b) If you have repetitive tasks to carry out, chances are there are ways of fully or partially
automating them.
c) Web interfaces are easy, and have certain benefits, but a competence with the command line
gives you access to more possibilities and sometimes these will suit your needs better.
Documentation and Help for Bioinformatics Software on Bio-Linux
There are a number of sources of information about the bioinformatics software on Bio-Linux, including
●
Bio-Linux bioinformatics documentation
●
local copies of software documentation – look in /usr/share/doc
●
options under the help menus in some graphical programs
●
web pages
●
journal articles.
Bio-Linux Bioinformatics Documentation
Categorised information about bioinformatics software on the Bio-Linux system can be accessed via the
Bioinformatics Docs icon on the left hand side of your desktop. Software can be listed by name or by
functional category.
The information for each program includes an overview of what it does, with links to local documentation
when available, as well as links to information on the internet.
An apology – the Bioinformatics Docs are currently (in 2014) out-of-date and in severe need of
attention. The plan is to integrate this catalogue with the ELIXIR tools registry but this work will
take many months to complete.
This notwithstanding, we highly recommend that you read the documentation for any programs
you intend to run.
This is especially important for programs that use heuristic algorithms (methods involving some
level of approximation, such as BLAST), and those that output numerical results.
33
Exercise 2-1
●
Click on the Bio-Linux Documentation icon on the desktop, then on Bioinformatics Docs
●
Select a category under the Browse by Category section.
●
Click on the names of any of the programs that might interest you and view the information
in the resulting web page.
●
Return to the search form and click on the link to List all categories. This shows a view of
all the documented software according to the functional category (or categories) they are listed
in.
Please refer to the bioinformatics documentation throughout this tutorial to find out more about the
programs introduced, or look on-line. Most current software will have web pages and online resources
for users. For example QIIME has a very active user community.
If you know of a good information resource for a program on Bio-Linux that is not mentioned in our
bioinformatics documentation system, or you have any problems with the system, please let us know by
emailing us athelpdesk@nebc.nerc.ac.uk.
Help Functions within the Programs
Documentation is available from within many programs. For example, many graphical programs have a Help
menu or button; many command line programs provide help if you type the name of the program followed
by –h, –help or –help. Some programs even have their own manual pages that can be accessed by typing
man followed by the program name.
Example data for this tutorial
The sequences referred to in this tutorial can be unpacked from the file
/usr/local/bioinf/documentation/bio-linux/intro_course/bioinf_files.tar.gz.
If you have just done the associated Introduction to Linux tutorial, you will already have these files – please
move on to the next section of the tutorial.
If you have joined the tutorial at this point, please refer to Exercise 1-1, parts b, c and d to download and
unpack the necessary sample data files.
For some parts you will also need qiime_tutorial_data.tar.gz, mothur_tutorial_data.tar.gz and
assembly_taster.tar.xz which are available in the same directory.
34
Interface choices
Software can be run on the command line, via graphical programs on your computer, via web interfaces, via
web services and/or via scripts. Bioinformatics programs can often be run using more than one of these
options. Each type of interface has pros and cons. We have summarised some of these for reference below.
Interface
Pros
Cons
Command line
Type out the command
and press enter
Fast to run once you know the program
Very flexible; usually many options
Repetitive tasks are easy to run or automate
Easy to log in remotely and carry out tasks
Have to learn the syntax
Have to find out what options are available
Prompted command
line
Type out the command
and respond to
prompts on screen
Easy to run; don’t have to remember the
command line syntax
Easy to log in remotely and carry out tasks
Easy to forget the diversity of options for a
program because of the temptation to just
reply to prompts provided
Slower to get running than “pure” command
line
Graphical interface
Start the program and
interact via menus
Often more intuitive and visually pleasing
than the command line
Extensive help is often available via a menu
option or button
Some programs (not all!) can be run by
clicking an icon in the Applications |
Bioinformatics menu on your system.
Appropriate for visual tasks such as
alignment editing, detailed annotation
checking, etc.
Can be slower to use than the command line,
especially for repetitive tasks
For some programs, the command line
version provides more functionality.
You may need your system admin to set up
programs so that you can run graphical
programs when logging in remotely
Web interface
Run via a web browser
window, usually at a
remote site
Usually intuitive
Can provide functionality not available via
locally-run programs such as access to
important data resources or results presented
in useful formats, e.g. including links to
related data resources, graphics, etc.
Some websites allow a certain degree of
“pipelining”, where the outputs of one
program can intuitively be supplied as input
to another.
Can be slow to use relative to the command
line, especially for repetitive tasks
You are subject to the rules and restrictions
of the site you are working on (e.g. data
volume, number of tasks, options available,
etc.)
You may not want to send private data over
the internet (e.g. if you are applying for a
patent?)
You can be subject to the whims of network
connectivity
35
Web services
Runs tasks over the
internet from a
program, usually
locally installed or run
via java webstart.
Can bring together the ease of a locally run
program with the data and computing
resources of a remote site
Can be used via graphical programs or scripts
You are dependent on network connectivity
You are dependent on the consistency of the
remote server where the functions you need
are running
You are dependent on the functionality the
remote site offers; this may not be as
extensive as the functionality you get locally
for some programs.
Scripts
Using a small
program that runs a
program or programs
for you
Very flexible
Great for automating tasks
Great for carrying out customised tasks
Straightforward to learn enough to alter
existing scripts to do exactly the task you
want.
You have to write the script or find a script
that does the job. This means learning a
programming language (or asking someone
who knows one to help you)
General points about working with bioinformatics programs
Sequence formats
A simple thing that often trips people up is sequence formats. There are many different sequence formats;
the reasons for this are both historical and functional.
Historically, when people first started writing analysis programs for molecular data, they designed a format
that they felt suited their needs. As time went on, numerous formats came into existence. We live with the
legacy of this. We must know what format our data is in, and whether the program we want to run can use
data in that format.
Functionally, a program may require information that can be included with data held in certain formats, but
not others. For example, EMBL format files can, in addition to the sequence data itself, contain descriptive
information about a sequence, such as its features. In contrast, plain format contains nothing inside the file
except the sequence data, while FASTA format allows a small amount of information about a sequence to be
given in a header line and FASTQ adds read quality information alongside the sequence. Clustal and msf
formats handle multiple aligned sequences, while phylip and nexus format files contain aligned sequences as
well as information relevant to phylogenetic analysis programs.
36
For repetitive tasks, we highly recommend the use of the command line, workflow software and/or scripting.
To analyse data, it must be presented to the analysis program in a format the progam
understands.
This seems obvious, but frequent errors (or worse, misleading results) occur when the data entered into
a program is not appropriate.
Converting files to different sequence formats used to be a frequent, and often time consuming, task in
bioinformatics. Luckily there are file conversion programs that take care of this easily for many formats. In
addition, many program understand more than one format.
Some common bioinformatics sequence formats, along with common filename conventions used for those
formats, are listed in the table that follows the next section.
We recommend the following page for more information and examples of common bioinformatics file
formats:
http://www.molecularevolution.org/resources/fileformats
File naming conventions in bioinformatics
The suffix, (the part of the filename after the final dot), is often used to denote to you, and other people, what
the format of the data inside the file is.
For example, the common suffix for clustal formatted alignments is aln. .A bioinformatics file that ends in
.aln is usually assumed to be a clustal formatted alignment file.
Another multiple sequence alignment format is phylip. A common suffix used on files containing sequences
in phylip format is phy.
Common suffices used for files containing data in particular formats are listed in the table following this
section. We highly recommend that you follow conventions when naming your data files.
Benefits to following the convention for filename endings include:
●
You will know your data format just by looking at the name of the file.
●
Following standard conventions, (rather than making up your own naming system), makes it
easier for other people looking at your files, (e.g. collaborators, or people helping you); they will
know the data format just by looking at the name.
●
Some graphical programs have filters set so that only files with particular suffices will be
listed in the file browser window when you try to load some data. If you use conventional
filename endings, this is less likely to cause problems for you.
Certain programs use information in the filename to interpret aspects of the data, (not just the data format).
Such programs have strict naming conventions for the whole filename. For example, some sequence
assembly programs either require, or are benefited by, defined naming schemes for sequence traces. The
filename will inform them about which sequences are read pairs, what direction sequence reads are in, and
other information relevant to assembly or visualisation. You will need to read the program documentation to
find out what is required in such instances.
37
You are not restricted to naming your files in any particular way but we highly recommend that you
follow the convention for the type of file you are generating/saving.
Following file naming conventions from the beginning will save you, and your collaborators,
a lot of time!
Common bioinformatics file formats
Format
Some common
filename endings
Comments
Embl or
swissprot
.dat
.embl
.sprot
.swiss
Usually these files, along with genbank files, contain feature information
as well as sequence.
Embl and Swisprot (or Uniprot) format are the same. Embl files contains
nucleotide sequences and Uniprot files contain peptide sequences.
Files downloaded from EMBL or Uniprot websites use the suffix .dat.
Often these are compressed with gzip, and so end in .dat.gz
Files generated by individuals in embl format will tend to end in .embl.
Genbank
.seq
.gb
.genbank
These files, along with embl and swissprot files, usually contain feature
information as well as sequence.
Individuals using this format, usually use the .gb or .genbank suffix. The
NCBI usually uses .seq for genbank sections.
FASTA
.fasta
.fsa
.fa
Possibly the most common sequence format.
It may contain nucleotide or peptide sequence(s) and a single-line header
per sequence.
FASTQ
.fastq
.fq
Very common for NextGen reads. Like FASTA with extra quality info
per sequence.
Alternative extensions may indicate the type of sequencing technology
- .fastqsanger, .fastqsolexa, etc.
Plain
.pln
.staden
.sdn
Not commonly used, as the file contents contain nothing but the sequence
itself; the only identifier of the sequence is in the filename.
Staden programs use the plain format, accounting for the last two of the
file suffices given.
Clustal
.aln
Multiple sequence alignment format
Originally from the clustalw program, but now recognised by many
programs that accept or output multiple sequence alignments.
Phylip
.phy
.phylip
Multiple sequence alignment format
Used by the Phylip suite of programs and many others, especially those
associated with phylogenetic analysis.
Msf
.msf
Multiple sequence alignment format
This was the standard output format from some of the suite of programs
called GCG. The format is still sometimes used.
Other multiple alignment formats are more generally used and thus are
often a better option to choose if you have a choice.
Nexus
.nxs
.nex
Multiple sequence alignment format
Used by a number of phylogenetics programs.
GFF
.gff
A format for describing genes and other features associated with DNA,
RNA and Protein sequences. Not generally used as input for analyses.
38
Naming files and the danger of over-writing previous results
Many programs will suggest a name for your results file. Sometimes this name is generated by taking the
beginning of the name of your input file, and adding a new suffix. However, sometimes it is just a generic
name like prettyplot.ps or clustalw.aln. We encourage you to change generic names to something
meaningful.
Apart from the fact that filenames like prettyplot.ps give you little idea what is in the file, if you do not
change the name, the next time a file of the same name is generated, you will overwrite previous results.
A common problem: what is a text file and what is not
If you didn’t work through the section on text files in part 1 we suggest you do so now. This part reiterates
the key points.
Sequence data are usually stored in text or binary files. Text files contain data you can look at in a text editor.
Binary files are not human readable. The file formats referred to in the table above are all text formats.
Examples of binary formats include ABI sequences and SFF sequence files.
Word documents may look like text, but they aren’t. The letters you see on the page of a Word document
(or OpenOffice Write, or other word processing programs) are stored along with layout data in a binary
format.
Most sequence analysis programs expect text. Plain old, nothing fancy, text.
It is an unusual situation to need to use sequence data that has been stored as a Word document (if it is not
unusual to you, you are probably doing things the hard way!). To get a text document when using Word,
save it as text only.
39
Rule of thumb
If you are using Word or any other word processing program at any stage your work with sequences, then it is
very likely that your life could be made a lot easier.
Please seek advice about other ways to handle your data. You will almost certainly save yourself time and
frustration. Honest.
Exercise 2-2a
A useful Linux command to find out what type of file you are dealing with is file. This does not
look at the filename but interrogates the file contents directly.
●
In your bioinf_files directory is the file example.xls. Move into your bioinf_files directory
if you are not already there and try running the command
file example.xls
●
In the bioinf_files directory is a file called testseq1.embl. Try running the command
file testseq1.embl
GZipped files in bioinformatics
gzip is a simple compression program, which you met right at the start of this course when you unpacked a
.tar.gz file. Any file can be compressed with gzip and .fastq.gz is now particularly popular as it saves a lot of
disk space. Some programs deal with .fastq.gz files directly, but for others you have to gunzip them first.
You can unpack the file on disk or use pipe syntax to feed it directly to your application. The zcat command
prints out the uncompressed contents of a gzipped file, so something like
zcat some_file.fastq.gz | some_app -
will work in many situations. Remember that the “–” by convention tells the application to process the data
received via the pipe. This way you never have to store the big uncompressed file on disk.
bzip2 and xz are similar compression programs. The tools bunzip2/bzcat and unxz/xzcat are provided to
unpack these files from the command line, but if in doubt just click on the file in the File Browser. The
graphical File Roller application will know how to unpack these and more file types.
40
Examples of running bioinformatics programs on Bio-Linux
Analysing sequences with QIIME
QIIME (pronounced ‘chime’) is a pipeline for performing microbial community analysis that
integrates many third party tools which have become standard in the field. QIIME can run on a
laptop, a supercomputer, and systems in between such as multicore desktops. QIIME is now
included in the standard Bio-Linux distribution.
As an example, we will use data from a study of the response of mouse gut microbial communities
to fasting (Crawford et al., 2009). To make this tutorial run quickly on a personal computer, we will
use a subset of the data generated from 5 animals kept on the control ad libitum fed diet, and 4
animals fasted for 24 hours before sacrifice. At the end of our tutorial, we will be able to compare
the community structure of control vs. fasted animals. In particular, we will be able to compare
taxonomic profiles for each sample type, differences in diversity metrics within the samples and
between the groups, and perform comparative clustering analysis to look for overall differences in
the samples.
To process our data, we will perform the following steps, each of which is described in more detail
in the Data Analysis Steps:
Filter the sequence reads for quality and assign multiplexed reads to starting samples by
nucleotide barcode.
Pick Operational Taxonomic Units (OTUs) based on sequence similarity within the reads, and
pick a representative sequence from each OTU.
Assign the OTU to a taxonomic identity using reference databases.
Align the OTU sequences and create a phylogenetic tree.
Calculate diversity metrics for each sample and compare the types of communities, using the
taxonomic and phylogenetic assignments.
Generate UPGMA and PCoA plots to visually depict the differences between the samples, and
dynamically work with these graphs to generate publication quality figures.
What follows is a streamlined version of the exemplary tutorial provided by QIIME (which can be
found athttp://qiime.sourceforge.net/tutorials/tutorial.html). Further details and parameters on the
below commands and many more can be found at this site.
The material was compiled and adapted by Daniel Pass, School of Biosciences, University of
Cardiff, for Bio-Linux courses June 2011. Editorialised for QIIME 1.6 by Tim Booth, NEBC.
QIIME allows analysis of high-throughput community sequencing data
J Gregory Caporaso, Justin Kuczynski, Jesse Stombaugh, Kyle Bittinger, Frederic D Bushman,
Elizabeth K Costello, Noah Fierer, Antonio Gonzalez Pena, Julia K Goodrich, Jeffrey I Gordon,
Gavin A Huttley, Scott T Kelley, Dan Knights, Jeremy E Koenig, Ruth E Ley, Catherine A Lozupone,
Daniel McDonald, Brian D Muegge, Meg Pirrung, Jens Reeder, Joel R Sevinsky, Peter J
Turnbaugh, William A Walters, Jeremy Widmann, Tanya Yatsunenko, Jesse Zaneveld and Rob
Knight; Nature Methods, 2010; doi:10.1038/nmeth.f.303
41
Note: Commands to type are shown in grey boxes like this. Some commands in QIIME are too
long to print on one line, so where you see , you need to continue typing the command on the
same line.
Preparation
First, we must copy the tutorial data to your home directory and extract it:
cd
tar -xvzf /usr/local/bioinf/documentation/bio-linux/intro_course/qiime_tutorial_data.tar.gz
Entering the directory (cd qiime_tutorial_data) and listing the files (ls) will show what was
extracted:
Sequences (.fna)
This is the 454-machine generated FASTA file.
Quality Scores (.qual)
This is the 454-machine generated quality score file, which contains a score for each base in
each sequence included in the FASTA file.
Mapping File (Tab-delimited .txt)
The mapping file is generated by the user. This file contains all of the information about the
samples necessary to perform the data analysis. At a minimum, the mapping file should
contain the name of each sample, the barcode sequence used for each sample, the
linker/primer sequence used to amplify the sample, and a Description column.
custom_parameters.txt
Structured file which can be customised to easily tune each analysis.
qiime_tutorial_commands_serial.sh
This is a script which will run all of the commands that we are about to see without user
input.
Data
This directory contains the reference files required for alignment of the OTUs.
To begin working with QIIME, you must enter the QIIME shell by typing ‘qiime’ in your working
directory. This has been successful if the prompt changes to end in ‘qiime >’. The commands
below will only be recognised within the special QIIME shell.
Assign Samples to Multiplex Reads
The first task is to assign the multiplex reads to samples based on their nucleotide barcode. Also,
this step performs quality filtering based on the characteristics of each sequence, removing any low
quality or ambiguous reads. The script for this step is split_libraries.py, but before running it we
make a directory for all the output:
42
…
cd qiime_tutorial_data
pwd
#This should show we are in qiime_tutorial_data
mkdir out
#This makes a directory for the results to go in
split_libraries.py -m Fasting_Map.txt -f Fasting_Example.fna -q Fasting_Example.qual -o split_library
This invocation will create three files in the new directory split_library/:
split_library_log.txt
This file contains the summary of splitting, including the number of reads detected for each
sample and a brief summary of any reads that were removed due to quality considerations.
histograms.txt
This tab delimited file shows the number of reads at regular size intervals before and after
splitting the library.
seqs.fna
This is a fasta formatted file where each sequence is renamed according to the sample it
came from. The header line also contains the name of the read in the input fasta file and
information on any barcode errors that were corrected.
Processing sequences into OTUs
There are several steps to go through to produce the annotated OTUs from the input sequences,
however the following 5 steps can be called using the ‘pick_de_novo_otus’ command found at the
end of this section.
1. Pick OTUs
Using the seqs.fna file generated from split_libraries.py, the sequences are clustered into
Operational Taxonomic Units (OTUs) based on their sequence similarity. This basic command uses
the default parameters: uclust matching, 0.97 sequence similarity, no reverse strand matching.
pick_otus.py -i split_library/seqs.fna -o out/uclust_picked_otus
2. Pick representative
Since each OTU may be made up of many sequences, we will pick a representative sequence for
that OTU for downstream analysis. This representative sequence will be used for taxonomic
identification of the OTU and phylogenetic alignment. (options: random, longest, most_abundant,
first)
mkdir out/rep_set
#This makes a subdirectory to store the representative set
pick_rep_set.py -i out/uclust_picked_otus/seqs_otus.txt -f split_library/seqs.fna
-o out/rep_set/seqs_rep_set.fasta –rep_set_picking_method most_abundant
3. Assign taxonomy
You can compare your OTUs against a reference database of your choosing. For our example, we
will use the default RDP classification system assignment method which comes ready with QIIME,
however BLAST is also an option.
assign_taxonomy.py -i out/rep_set/seqs_rep_set.fasta -o out/rdp_assigned_taxonomy
43
…
4. Make OTU table
Tabulates the number of times an OTU is found in each sample, and adds the taxonomic predictions
for each OTU in the last column if a taxonomy file is supplied.
make_otu_table.py -i out/uclust_picked_otus/seqs_otus.txt
-t out/rdp_assigned_taxonomy/seqs_rep_set_tax_assignments.txt -o out/otu_table.biom
5. Align sequences
Alignments can either be generated de novo using programs such as MUSCLE, or through
assignment to an existing alignment with tools like PyNAST. For small studies such as this tutorial,
either method is possible. However, for studies involving many sequences (roughly, more than
1000), the de novo aligners are very slow and assignment with PyNAST is preferred.
align_seqs.py -i out/rep_set/seqs_rep_set.fasta -o out/pynast_aligned_seqs
–alignment_method pynast -t data/core_set_aligned.imputed.fasta
6. Filter alignment command
Before building the tree, the alignment must be filtered to remove columns comprised only of gaps.
filter_alignment.py -i out/pynast_aligned_seqs/seqs_rep_set_aligned.fasta
-o out/pynast_aligned_seqs –lane_mask_fp data/lanemask_in_1s_and_0s
7. Build phylogenetic tree command
Produces a newick formatted tree file (.tre) which can be viewed using most tree visualization tools.
Method options: clearcut, clustalw, raxml, fasttree_v1, fasttree(default), muscle
make_phylogeny.py -i out/pynast_aligned_seqs/seqs_rep_set_aligned_pfiltered.fasta -o out/rep_set.tre
The above commands are integral to QIIME and further downstream analysis. Once their function
and process is understood, the parameters can be set in the custom_parameters.txt file and run
sequentially using the workflow script:
pick_de_novo_otus.py -i split_library/seqs.fna -p custom_parameters.txt -o out
# Make sure you change the path in the custom_parameters.txt file before running this command
Data to information
QIIME has many different ways to visualize and interrogate the data. Here we will explore just a
few.
Note: To open a HTML file type:
firefox filename
44
…
…
…
Heatmap
The QIIME pipeline includes a very useful utility to generate images of the OTU table. You can
open this file with any web browser, and will be prompted to enter a value for “Filter by Counts per
OTU”. Only OTUs with total counts at or above this threshold will be displayed. The OTU heatmap
displays raw OTU counts per sample, where the counts are coloured based on the contribution of
each OTU to the total OTU count present in that sample.
make_otu_heatmap_html.py -i out/otu_table.biom -o out/otu_heatmap
Taxonomy Summary Charts
The taxa of the samples can be visualised at each taxonomic level (see the' –L flag).
Here, summarize_taxa.py produces a text file at the Phylum level (Level 2=Domain, 3=Phylum,
4=Class, 5=Order, 6=Family, 7=Genus) and plot_taxa_summary.py produces the html output.
summarize_taxa.py -i out/otu_table.biom -o out/taxa_summary -L 3
plot_taxa_summary.py -i out/taxa_summary/otu_table_L3.txt -l Phylum -o out/taxa_charts -k white
Diversity
Community ecologists typically describe the microbial diversity within their study. This diversity
can be assessed within a sample (alpha diversity) or between a collection of samples (beta
diversity).
Alpha
Alpha diversity will be calculated and displayed though using this workflow. The full list of metrics
available can be found athttp://qiime.sourceforge.net/scripts/alpha_diversity_metrics.html. The
html visualisation file can be found at ‘out/arare/alpha_rarefaction_plots/rarefaction_plots.html’
alpha_rarefaction.py -i out/otu_table.biom -m Fasting_Map.txt -o out/arare -p custom_parameters.txt -t out/rep_set.tre
Beta
Beta diversity can be represented in many different ways, shown below. By rarefying the samples to
the smallest set (in this example dataset, 146 sequences) sample heterogeneity can be removed.
Firstly, 3d plots are generated using unifrac.
beta_diversity_through_plots.py -i out/otu_table.biom -o out/bdiv_even146 -p custom_parameters.txt
-m Fasting_Map.txt -t out/rep_set.tre -e 146
To view a 3d plot, navigate to the jar directory within the metric you wish to view
(weighted/unweighted, continuous/discrete) and enter ‘java -jar jar/king.jar */*.kin’ where you can
then view the output. The more traditional 2d plots are also generated by unifrac:
45
…
make_2d_plots.py -i out/bdiv_even146/unweighted_unifrac_pc.txt -o out/bdiv_even146/unweighted_unifrac_2d
-m Fasting_Map.txt -k white -p out/bdiv_even146/prefs.txt
These are easiest viewed through the html page:
‘out/bdiv_even146/unweighted_unifrac_2d/unweighted_unifrac_pc_2D_PCoA_plots.html’
Inter-Sample Distance
Distance Histograms are a way to compare different categories and see which tend to have
larger/smaller distances than others.
make_distance_histograms.py -d out/bdiv_even146/unweighted_unifrac_dm.txt
-m Fasting_Map.txt -o out/bdiv_even146/distance_histograms -p out/bdiv_even146/prefs.txt
The html is found at:
‘out/bdiv_even146/distance_histograms/unweighted_unifrac_dm_distance_histograms.html’
Jackknifing & UPGMA
To measure robustness of the sequencing effort, we perform a jackknifing analysis, wherein a small
number of sequences are chosen at random from each sample, and the resulting UPGMA tree from
this subset of data is compared with the tree representing the entire available data set. This produces
jackknifed weighted and unweighted 2d and 3d plots like above, and also jackknifed trees found in
the out/jack/ directory.
jackknifed_beta_diversity.py -i out/otu_table.biom -o out/jack -p custom_parameters.txt
-e 110 -t out/rep_set.tre -m Fasting_Map.txt
make_bootstrapped_tree.py -m out/jack/unweighted_unifrac/upgma_cmp/master_tree.tre -s
out/jack/unweighted_unifrac/upgma_cmp/jackknife_support.txt -o
out/jack/unweighted_unifrac/upgma_cmp/jackknife_named_nodes.pdf
evince out/jack/unweighted_unifrac/upgma_cmp/jackknife_named_nodes.pdf
A key feature of the QIIME interface is the ability to list the steps which you wish to run and have
them sequentially performed by running them as a standard shell script. In the file
qiime_tutorial_commands_serial.sh in your working qiime directory, you will find the commands
which we have just gone through. This can be called directly from the QIIME shell prompt and will
produce the same output as we have achieved, with no user input. This can be edited, along with
custom_parameters.txt to tune the analyses to your specific requirements.
What is described above is a brief introduction to the type of analyses which QIIME can perform.
Extensive details of the commands, parameters and metrics used can be found at
http://www.qiime.org/scripts or through typing a QIIME command followed by ‘-help’ into the
qiime shell prompt.
46
…
…
…
…
…
Analysing sequences with MOTHUR
MOTHUR is another popular pipeline for performing microbial community analysis that integrates
many third party tools which have become standard in the field. MOTHUR is included in the
standard Bio-Linux distribution.
As an example, we will use the same data used in the previous QIIME tutorial. Please refer to the
previous QIIME tutorial for the description of the experiment and the data.
What follows is an adapted version of the exemplary tutorial provided by MOTHUR (which can be
found athttp://www.mothur.org/wiki/Sogin_data_analysis). Further details and parameters on the
below commands and many more can be found at this site. The material was compiled and adapted
by Soon Gweon, NBAF.
Introducing mothur: Open-source, platform-independent, community-supported software for
describing and comparing microbial communities. Schloss, P.D., et al., Appl Environ Microbiol,
2009. 75(23):7537-41
Preparation
First, we must copy the tutorial data to your home directory and extract it:
cd
tar -xvzf /usr/local/bioinf/documentation/bio-linux/intro_course/mothur_tutorial_data.tar.gz
cd mothur_tutorial_data
Entering the directory (cd mothur_tutorial_data) and listing the files (ls) will show what was
extracted:
Fasting_Example.fna
This is the 454-machine generated FASTA file.
Fasting_Example.qual
This is the 454-machine generated quality score file, which contains a score for each base in
each sequence included in the FASTA file.
Fasting_Example.oligos
This is generated by the user. This file is used to provide barcodes and primers to
MOTHUR.
data
This directory contains the reference files required for alignment of the OTUs.
To begin working with MOTHUR, you must enter the MOTHUR shell by typing ‘mothur’ in your
working directory. This has been successful if the prompt changes to end in ‘mothur >’. The
commands below will only be recognised within the special MOTHUR shell.
47
mothur
Assign Samples to Multiplex Reads and Quality Filtering
First, we need to separate each sequence according to the barcode and primer combination. The first
task is to assign the multiplex reads to samples based on their nucleotide barcode using the
information from oligos file. Also, this step screens sequences based on the quality file, truncating
reads at where the quality score falls below the threshold. The script for this step is trim.seqs:
trim.seqs(fasta=Fasting_Example.fna, oligos=Fasting_Example.oligos, qfile=Fasting_Example.qual, qaverage=25,
minlength=200, maxlength=1000)
This creates five files in the current directory:
Fasting_Example.trim.fasta
This is the processed fasta file.
Fasting_Example.trim.qual
This is the precessed quality file.
Fasting_Example.scrap.fasta
This file contains sequences which fell below the thresholds (below quality score of 25,
shorter
than 200 bps or longer than 1000 bps)
Fasting_Example.scrap.qual
This is the quality file for the scrapped sequences.
Fasting_Example.groups
This is a two-column list with the first column indicating the sequence names of those
sequences
in the Fasting_Example.trim.fasta file and the second column the group that it came
from.
Generating Alignment & Distance Matrix
The first thing we want to do is to simplify the dataset by working with only the unique sequences.
We are not chucking anything here, we are just making the life of your CPU and RAM a bit easier.
We do this with the command: unique.seqs
unique.seqs(fasta=Fasting_Example.trim.fasta)
We then need to generate an alignment of our data using the align.seqs command by aligning it to
SILVA-compatible alignment database reference alignment. Please note that this step can take
awhile to complete.
align.seqs(fasta=Fasting_Example.trim.unique.fasta, reference=data/silva.bacteria.fasta, flip=T)
Next, we need to filter our alignment so that all of our sequences only overlap in the same region
and remove any columns in the alignment that don’t contain data. We do this by running the
filter.seqs command.
48
filter.seqs(fasta=Fasting_Example.trim.unique.align)
Next, we want to calculate the column-formatted distance matrix, but we are only interested in
distances smaller than 0.15 at this stage. We will do this using dist.seqs command.
dist.seqs(fasta=Fasting_Example.trim.unique.filter.fasta, cutoff=0.15)
Classify Sequences
We then need to classify our sequences using the MOTHUR version of the “Bayesian” classifier.
We do this with classify.seqs command using the SILVA-compatible reference file and taxonomy
file(http://www.mothur.org/wiki/Silva_reference_alignment)
classify.seqs(fasta=Fasting_Example.trim.unique.filter.fasta, name=Fasting_Example.trim.names,
template=data/silva.bacteria.fasta, taxonomy=data/silva.bacteria.silva.tax)
Renaming Files
This step is done only to make our life easier by making copies of some files and giving it nice and
short names. The command system() allows you to run programs outside of MOTHUR without
leaving the MOTHUR shell.
system(cp Fasting_Example.trim.unique.filter.fasta final.fasta)
system(cp Fasting_Example.trim.names final.names)
system(cp Fasting_Example.groups final.groups)
system(cp Fasting_Example.trim.unique.filter.dist final.dist)
system(cp Fasting_Example.trim.unique.filter.silva.wang..taxonomy final.taxonomy)
Clustering Sequences
Now we want to assign these sequences to OTUs for every possible distance up to and including a
distance of 0.15. By default, this method uses the average neighbour algorithm.
cluster(column=final.dist, name=final.names, cutoff=0.15)
Generating OTU Table and Normalisation
Now that we have a list file, we need to create a table that indicates the number of times an OTU
shows up in each sample. This is called a shared file and can be created using the make.shared
command. We are only interested in the distance of 0.03 from the list file, so we give 0.03 to “label”
parameter.
make.shared(list=final.an.list, group=final.groups, label=0.03)
We then normalise the number of sequences in each sample. In order to do this, we need to know
how many sequences are in each step. You can do this with the count.groups command.
49
count.groups()
From the output we see that the sample with the fewest sequences had 146 sequences in it, so we
normalise all the samples to this number of sequences.
sub.sample(shared=final.an.shared, size=146)
Classifying OTU
The last thing we’d like to do is to get the taxonomy information for each of our OTUs. To do this
we will use the classify.otu command to give us the majority consensus taxonomy.
classify.otu(list=final.an.list, name=final.names, taxonomy=final.taxonomy)
Converting the shared file to BIOM-format
The make.biom command allows you to convert your shared file to a biom file. Please refer to
http://biom-format.org/documentation/biom_format.html for detail.
make.biom(shared=final.an.shared, contaxonomy=final.an.unique.cons.taxonomy)
Data to information
MOTHUR has many different ways to visualise and interrogate the data. Here we explore just a few.
Heatmap
Now we’d like to compare the membership and structure of the various samples using an OTU-
based approach. Let’s start by generating a heatmap of the relative abundance of each OTU across
the 24 samples using the heatmap.bin command.
heatmap.bin(shared=final.an.shared)
The output will be in a SVG-formatted file called final.an.0.03.heatmap.bin.svg. In this heatmap,
the red colors indicate communities that are more similar than those with black colors.
Venn Diagram
MOTHUR allows you to generate a Venn diagram with 'venn command. Let’s take a look at the
Venn diagram for PC.354 and PC.355.
venn(shared=final.an.shared, groups=PC.354-PC.355)
This generates a file called final.an.0.03.sharedsobs.PC.354-PC.355.svg. To view the file, type the
following in another terminal:
eog final.an.0.03.sharedsobs.PC.354-PC.355.svg
When generating Venn diagrams we are limited by the number of samples that we can analyze
simultaneously. MOTHUR can generate up to 4-way Venn diagram:
50
venn(shared=final.an.shared, groups=PC.354-PC.355-PC.356-PC.481)
Finding and running useful scripts
Scripts are small programs written in a scripting language such as Perl or Python or even by compiling
commands you’d run directly in the shell into a shell script file. Unlike normal binary applications, the
program files can be examined and edited directly using a text editor. However, Linux is able to run these
text files as if they were compiled programs by automatically invoking the appropriate interpreter named on
the first line of the script – for example if the first line of a script says:
- !/usr/bin/perl
Then the script will be run using the Perl interpreter. Writing scripts is beyond the scope of this course, but it
is useful to be able to run scripts that others have written.
Exercise
http://nebc.nerc.ac.uk/tools/code-corner/scripts
•
Visit the above link, then find the “fastagrep” script located under [http://nebc.nerc.ac.uk/tools/code-corner/scripts/sequence-formatting-and-other-text-manipulation “Sequence Formatting and Other
Text Manipulation”]. (If you don’t have a net connection there is also a copy in bioinf_files)
•
Make a folder called “scripts” in your home directory and save the file there.
•
In a terminal run the command chmod a+x scripts/fastagrep to tell Linux that this file is an
executable script.
•
Type ~/scripts/fastagrep to actually run the script. In this case you will see basic help.
Fastagrep is a script to help extracting sequences of interest form a multi-FASTA file by matching text in the
header lines. It is a FASTA-aware version of the standard Linux ’grep’ command introduced in part 1. An
example invocation of fastagrep in the case where the FASTA file has Uniprot-style headers would be:
~/scripts/fastagrep -F ’OS=Zea mays’ uniprot_sprot.fasta
•
Here, the -F flag specifies an exact text match and the ’OS=…’ syntax is specific to
the headers used by Uniprot.
Tip:
•
If you get a “permission denied” error when running the script, it normally means that you missed
out the chmod a+x … part.
•
If you get a “bad interpreter” error it means that the interpreter named on the first line of the file
cannot be found on the system. You can always run the interpreter explicitly – eg. by typing perl
scripts/fastagrep.
A practical exercise using fastagrep is included in the next section.
Aligning sequences using MUSCLE
Aligning multiple sequences is a very common task, as it is the first step to comparing related sequences.
There are many algorithms for performing gapped global alignments over a set of sequences, most of which
can be used on either nucleotide or peptide input. Many web based tools offer to align sequences, for
examplehttp://uniprot.org can align sequences retrieved from a search on the reference database, and
additional sequences can also be uploaded and added to the alignment. GUI applications like ClustalX and
Jalview can call alignment applications like Clustal, MUSCLE, and MAFFT for you and display the results
graphically.
Sometimes you may want to run the alignment directly from the command line – reasons for this include:
51
•
You want to fine tune the options passed to the aligner
•
You want to use an aligner program that is not supported by the GUI or website you are using
•
You want to run the alignment remotely – for example on a powerful departmental server
•
You want to run several alignments at once using a loop or a short script
Exercise
Plants contain many closely related genes in the cellulose synthase family. Previous studies have examined
these in some model organisms, eg maize[ref below]. It might be useful to compare the cellulose synthase
genes in another plant of interest, or to align bacterial homologues against the plant genes.
For use in this exercise, the file all_cellulose_synthase.fasta in the example files directory
contains all the reference cellulose synthase genes from Uniprot (selected with the query
“name:cellulose synthase”).
1. Ensure that you have the fastagrep script available from the previous exercise.
2. Use fastagrep to extract all the sequences that come from oilseed rape (Brassica napus).
3. Modify your command so that instead of printing the matching sequences to the terminal
the results are saved as a file.
•
Hint – this involves using the > operator
4. Now invoke MUSCLE with the default parameters to perform the alignment. Use the
following command but replace the ??? with the appropriate filename:
muscle -in ??? -out seqs.aln
5. Run the Jalview application from the bioinformatics menu. Close the default project
windows that appear, and select “Input Alignment -> from File”. Now load seqs.aln,
enable colouring in the Colour menu and bring up the overview window from the view
menu.
Jalview has many options for viewing and editing the alignment, drawing trees, etc.
For comparing alignments, you may want to add the “-stable” flag to the muscle command in order to
maintain the sequences in the same order as the input FASTA file.
[ref for paper mentioned above]
Holland et al. 2000. A comparative analysis of the plant cellulose synthase (CesA) gene family.
http://www.ncbi.nlm.nih.gov/sites/entrez?db=pubmed&cmd=search&term=10938350
52
BLAST
The Basic Local Alignment Search Tool (BLAST) searches for regions of local similarity between
sequences. The program compares nucleotide or protein sequences or patterns to sequence, or sequence-
related, databases and calculates the statistical significance of matches.
The documentation here covers only the most commonly used BLAST implementation, BLAST+ from
NCBI. There are several other BLAST varients that essentially do the same thing. Some are commercial, for
example AB-BLAST from Advanced Biocomputing LLC, formerly known as WU-BLAST. There are also
many other programs that search sequence databases and perform local alignments. Before relying on
BLAST as your search tool you should consider whether one of these might better suit your analysis needs.
A few examples of ways to run BLAST, on Bio-Linux or otherwise
●
Locally installed command line against locally installed BLAST databases
●
Locally installed command line against remote databases
●
Locally through options in graphical programs (e.g. under the Run menu in Artemis)
●
Remotely through ssh tunnelling or the remote BLAST options in Artemis.
●
Remotely on websites such as those available at the NCBI and EBI
●
Remotely using webservices, either through programs such as Taverna, or through scripting
For this course, we assume that you are familiar with running BLAST searches using at least one web-based
interface. If you are not, then this is a good time to look at the facilities offered through one of these sites,
and to try BLASTing some of the example sequences in the coruse folder:
NCBI:
http://blast.ncbi.nlm.nih.gov/Blast.cgi
EBI:
http://www.ebi.ac.uk/Tools/sss/
Bio-Linux includes both the BLAST+ package and the older NCBI “blastall” implementation. Information
and links in the Bio-Linux Bionformatics Documentation System (icon on your Desktop) provide
information on both packages. The ncbi-blast+ package contains a number of programs allowing you to
carry out different types of searches, as well as to create databases, reformat reports, etc.
What this course covers
This course covers how to run BLAST+ programs via the command line and a few simple steps you can take
to work with more than one sequence at a time. We also cover how to install your own BLAST databases in
Appendix C. We do not cover the internals of BLAST searching in any detail or how to interpret BLAST
results.
Why use BLAST on the command line?
The web resources available for BLAST are highly developed, usually stable, and have access to a much
greater set of data than most people will have available locally. They also often provide lovely graphics and
links out to other data resources or analysis programs. So why use the command line at all?
For small volumes of data, where you wish to search a commonly available database or subset of data
available through a website, then web access is a very good option. Web-based utilities are also good for
experimenting with parameters when determining useful settings for your investigation. The command line
comes into its own for setting up searches quickly, for processing large volumes of data, for automating your
searches, and for giving you the ability to get just the information you want returned from the BLAST
53
searches. (This last point has been made easier than ever in the newer BLAST+ programs, where you can, to
a certain extent, specify which information to return in a tab delimited format1.)
General considerations for database searching
Database searching should be approached like an experiment. In particular: define your aims before your
start. This will save you an enormous amount of time, both in terms of time taken doing searches and time
taken bringing together and reporting your findings later.
Before you start searching with a sequence, it is useful to outline your answers to questions like:
●
What am I trying to find out/what do I want to do with the results?
●
What kind of database do I want to search with my sequence? E.g. nucleotide, protein, pattern, profile?
●
Which database(s) in particular do I want to search? Why?
●
Are there are any subsets of the database that I could or should restrict my search to?
●
Do I want to take into account potential frameshifts in my coding sequences?
●
What format is my sequence in?
●
Do I want to filter my sequence for repeats and low complexity regions before searching?
●
Is the scoring system I’ve chosen appropriate?
●
Where and how will I store a record of the parameters I’ve used and the database version I’ve searched
with?
A very, very brief introduction to BLAST+
'''BLAST+ includes programs to perform searches with different types of input against databases holding
different types of data. Each search combination is referred to by a particular name and has its own
command. A table of the basic BLAST “flavours” and what they do is given below.
Blastall flavour
Input sequence type
Database sequence type
blastn
nucleotide
nucleotide
blastp
peptide
peptide
blastx
nucleotide (6 frame conceptual
translation is created during run)
peptide
tblastn
peptide
nucleotide (6 frame conceptual
translation is created during run)
tblastx
nucleotide (6 frame conceptual
translation is created during run)
nucleotide (6 frame conceptual
translation is created during run)
1 You can return most information you want using the tab delimited output options in BLAST+. However, a key thing
missing is the Description field – usually the most interesting field for a biologist! To get this field, along with
others, out of a BLAST report, it is still necessary to consider custom scripting – or grabbing someone else’s script
that does the job!
54
We HIGHLY recommend you invest time learning about what BLAST does in detail, including how it works
and what the statistics is produces mean. The “take the top hit” method will rarely serve your research well.
We provide a list of references and helpful web pages in Appendix C that we hope will help you learn more
about blast programs.
There are many other programs available as part of the BLAST+ release apart from the ones above. These
include blastdbcmd, dustmasker, psiblast, rpsblast+, segmasker and srsearch.. These programs are not
covered here, but are worth learning about for your own work.
How a BLAST database looks on the file system
A typical BLAST database consists of three files names with extensions '.pin .phr and .psq for protein
databases or .nin .nhr and .nsq for nucleotide databases. These files represent a specially indexed version
of a multi-fasta source file. Do not try to examine the files in a regular text editor (they appear as garbage),
and do not try to split the files apart. When invoking BLAST commands, just give the path to the database
without any extension (see examples). BLAST will know to find and read the three files.
A simple blastp search
The following is a basic blastp command – you can run it from within the course folder.
blastp -db blastdb/sprot –query cd4_cerae.fasta –evalue 0.0001 > cd4_cerae.blastp
The command is easy to understand when you break it down. It means:
➔
run blastp, i.e. a peptide sequence will be used to search a peptide database.
➔
The database (-db) to be searched is called sprot and can be found in the blastdb directory.
➔
The input sequence (-query) is cd4_cerae.fasta.
➔
Only report results of sequences with e-values (-evalue) better than (i.e. lower than) 0.0001.
➔
Put the results of this search in the file cd4_cerae.blastp, using standard shell redirection
(>).
You can fine tune BLAST easily using additional command line options. We highly recommend that you
read about BLAST and determine appropriate settings for your research questions. This will ultimately save
you a huge amount of time and energy.
A copy of the Swissprot part of Uniprot, formatted for BLAST searches, is located in the directory blastdb,
under your bioinf_files directory. We do not fully cover the use of makeblastdb in this course, but some
more info is shown in Appendix C. For completeness, the steps we took, including the command we used to
create the BLAST formatted Swissprot database, are as follows:
We downloaded the fasta formatted swissprot file from
ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/uniprot/swissprot.gz
into the blastdb directory under bioinf_files.
We then used the makeblastdb command in a one-liner run within the blastdb/ directory.
gunzip -c swissprot.gz | makeblastdb -title Swissprot -out sprot -dbtype prot -in -
Note the use of a hyphen “-” in place of a filename tells the command to get the input via the pipe “|”. This
does not work in all cases but is a common convention in command line tools.
55
Reference databases for BLASTing would normally be stored in a shared location
You can either give the full or relative PATH to your blast databases within the blast command, or you can
store your blast databases in a location that is supplied as the value for the BLASTDB environmental
variable and just provide the database name in the blast command line.
When loading reference BLAST databases onto Bio-Linux 6 you can can put them in the default BLASTDB
location /home/db/blastdb OR change the environmental variable BLASTDB to a location appropriate for
your work. If you do not have sudo access you will need to talk to the system administrator of the machine
about this. Note that the default location for blast databases may be different on different machines, and may
change on Bio-Linux in the future.
For the purposes of this tutorial, we will give each BLAST command the explicit location of the BLAST
database to search.
Exercise
●
Move into the bioinf_files directory if you are not already there.
●
List the files in the blastdb subdirectory. The files called sprot.p* are the files that BLAST uses when
it searches.
●
From within the bioinf_files directory, run the example command given previously, ie:
blastp -db blastdb/sprot –query cd4_cerae.fasta –evalue 0.0001 > cd4_cerae.blastp
●
Look at the results file that has been created.
●
Try a blastx search on the file unknown.fasta. This time set the evalue to 1 and save the results in
unknown.blastx. The command you use will start like this:
blastx -db blastdb/sprot -query unknown.fasta …???…
Recall that a blastx search translates a nucleotide sequence in six frames and searches a peptide database.
●
Look at the results file.
●
blastp expects a peptide query file, and blastx expects nucleotides. What would you expect to happen
if you use an inappropriate BLAST flavour? Try it and see.
Formatting BLAST output
You have now seen the default report format for BLAST searches. There are many options available using
the -outfmt option with a numerical argument between 0 and 11. The default is -outfmt 0.
The BLAST+ commands don’t (currently) have man pages, but to see a list of all the -outfmt options you
can use the builtin help function:
blastx -help | less
Exercise
●
Run either of the above BLAST searches again, this time adding the parameter -outfmt 6 to the
command. Make sure you change the name of the output file as well, or else just let the results get printed
to the screen.
●
Look at the results from this search and compare it to what was returned using default formatting. Is it
easier or harder to read? Is there information present in one report that is not in the other?
Note:''' BLAST+ programs offer finer control over the format and contents of results returned – see the help
page as mentioned above.
56
Handling multiple sequences
BLAST makes it easy to deal with a medium-sized number of sequences at once – say up to a few hundred.
For thousands of sequences, you will probably want to use the ideas introduced here, in conjunction with
running your searches on a compute cluster and using scripts to pull out information of relevance from the
result files.
The general principle of needing more sophisticated techniques as the data volume increases applies to pretty
much any bioinformatics task.
First we’ll look at BLASTing a file containing more than one sequence
In the next section we’ll process multiple sequences as input using a “foreach” loop
BLAST searching using fasta files containing more than one sequence
Exercise
●
Look at the contents of the file multiseqs.fasta in your bioinf_files directory. How many sequences
are in this file?
●
Run a blastx search using multiseqs.fasta as the input file.
blastx -db blastdb/sprot -query multiseqs.fasta -evalue 0.4 > multiseqs_1.blastx
●
Look at the results file to see how the results have been reported. How easy would this be to read and
understand? Could you load the results into other software tools?
●
Try the above query again, but with the -outfmt 6 flag.
●
Read about the -num_descriptions, -num_alignments and -max_target_seqs flags in the BLAST+
documentation. For very small studies, where you might read through the BLAST reports yourself rather
than doing further processing on them using the computer, these flags may help you otherwise.
Processing multiple files using a foreach loop
This section introduces a powerful shell feature that allows you to quickly automate repetitive tasks. In this
case we’ll use BLAST to illustrate the use of the loop, so you’ll need to look at the previous exercise before
attempting this one.
A foreach loops say to the computer:
“For each thing in this list, do the following:”
So, when running multiple BLAST searches, you might want to do something like:
“For each sequence in my list, run a blastx search against my Swissprot database.”
You can also create nested foreach loops. For example, if you had a list of sequences and a list of databases,
you could use a nested foreach loop to get the computer to do something like this:
“For each sequence in my sequence list, run a blastx search against each database in my database list”
You can run a foreach loop on arbitrarily long lists. However, for the exercises below, we will use just five
sequences:
testseq1.fasta, testseq2.fasta, testseq3.fasta, testseq4.fasta and testseq5.fasta.
57
The foreach loop explained step by step
You need to tell the computer the list of files to work on. Here, we will use a glob pattern match to indicate
the list of sequences we want to work with. Recall that echo simply prints its arguments and so can be used
to show glob expansions:
echo testseq*.fasta
or, if we wanted to be more specific:
echo testseq[1-5].fasta
We bind each file in the list to a loop variable within the first line of the foreach loop. So the following says:
“take each file in this list in turn and refer to it as j”:
foreach j in testseq[1-5].fasta
When we finish, our complete foreach loop will state:
foreach j in testseq[1-5].fasta ; do
blastx –db blastdb/sprot -query $j -evalue 0.01 -out $j.blastx
done
This means: for each sequence in the list in the first line, run the command in the second line. When all the
sequences in the list have been dealt with, then finish.
Loops are very powerful and useful, so it is worth understanding exactly how they work. A more detailed
explanation follows.
Explanation of the first line of a foreach loop:
●
we have used the command “foreach”. It’s not the only way to write a loop but it is the most used.
●
the “j” is a name we choose to refer to “each thing” – more specifically, for each thing we get to in the
list, let’s refer to it by the name j. This is an arbitrary name. You can use whatever you want. So the
following are equally correct to the line given above:
foreach myThing in testseq[1-5].fasta
calls each list item in turn “myThing”
foreach x in testseq[1-5].fasta
calls each list item in turn “x”
foreach seq in testseq[1-5].fasta
calls each list item in turn “seq”
Once you have chosen a name for each thing in your list, you must use that name with a dollar symbol “$” to
refer to the list item in any commands that follow within the foreach loop. Recall how the $ construct also
lets you access the contents of environment variables, like $BLASTDB.
58
Please note that the syntax used this section assumes that you are in the default Zshell. If the
commands fails for you and you are sure that you have typed them in correctly, please check your shell.
You can identify your current shell by typing the command
echo $0. If you are not in the zshell (zsh)
already, just type
zsh in your terminal window.
Other shells provide the same functionality as the foreach loop demonstrated here, but the syntax is different.
●
The keyword in is followed by a list of things to loop over. In this case the list is being generated as the
result of a single glob pattern expansion, but this need not be the case. You can list items explicitly, use
multiple patterns, or even generate a list on-the-fly using backtick substitution (not covered in this tutorial).
●
The semicolon serves to terminate the list of items to be processed, and do primes the shell to accept
one or more commands to be run within the loop. The single command done terminates this list.
●
So the overall effect of that one line is: “foreach thing that matches the pattern testseq[1-5].fasta, do
the following:”, and after that you just supply a regular command to run. Note how we can reference $j as
the input sequence and also use $j.blastx to generate a filename for the results – ie. the original name
with .blastx appended.
Hint: It is usually a good idea to check that the command or pattern used to create a list does actually
generate the list you expect before including it within a foreach loop. Once common trick is to add echo
on the start of the command within the loop, so the commands are printed to the screen but not run.
Exercise
Set up a foreach loop to run blastx searches using the five testseq*.fasta sequences with the Swissprot
database:
●
Type this command to begin the foreach loop as described above:
foreach j in testseq[1-5].fasta ; do
●
You will now be seeing something like:
live@machine[bioinf_files] foreach j in testseq[1-5].fasta ; do
foreach>
●
The foreach> is a prompt, much like the regular prompt – it is here we tell the computer what we
want it to do with each item in the list. To do this, type:
blastx –db blastdb/sprot -query $j -evalue 0.01 -out $j.blastx
Recall that we defined each thing that we want to work on by the letter j in the first line of the
foreach loop. In each subsequent line of the foreach loop, we refer to each thing by prefacing the j
with a $ sign.
Each $j in that command will be replaced by the name of a file from the list.
So here, the blastall command is executed with each filename in turn, and output files are named
using the sequence filename with .blastx appended.
●
You will now see another foreach> prompt, inviting a second command, but you are done so type
done
This indicates that there are no more processing steps to include in this foreach loop.
●
After running the foreach loop successfully, type the command
ls -l *blastx
59
You should now see that you have five blastx results files. Imagine you had 100 sequences to blast – you
could set up a foreach loop and go get a coffee. (Of course, you still need to figure out how you’re going to
use or analyse the results files if you’re working with large numbers of sequences.)
We mentioned above that the j in the foreach loop was an arbitrary name. As an example, if we had used seq
instead of j, the foreach loop would have been written:
foreach seq in testseq[1-5].fasta ; do
blastx –db blastdb/sprot -query $seq -evalue 0.01 -out $seq.blastx
done
Notice that we have just replaced each instance of $j with $seq. Be careful, as the shell will not notice if
your names do not match up, but will just substitute blank spaces into the command.
Exercise
●
Look through all the files called testseq*.blastx by using the command less:
less testseq*.blastx
●
To go to the next document, you need to type the two-character command :n
●
To quit, press q
Why go to all this trouble when we could just create a multiple fasta file and run a BLAST search in one go?
Well, there is often more than one way to do a task, but foreach loops can be used with any programs – not
just BLAST – and not all programs will take multiple inputs, so this method is widely applicable.
Multiple tasks, and even inner loops can be carried out in a single foreach loop, as the following
example shows.
60
Exercise – advanced looping
If you have time, you can run the following foreach loop. Try to figure out what it does before running it.
You may need to read the man pages for basename and cut to understand all the steps being taken. Note,
the text has been indented for clarity but you need not type it like this. Also note the special quotes in the
second line are backticks obtained with the key at the top left of the keyboard, next to number 1. These
serve to capture the output of the basename command into the newname variable, and later to drive an
inner loop from a list contained in a file. (Earlier, we said these wouldn’t be
covered in the course, but here’s a little taster. Backticks are a powerful feature
for any aspiring command-line guru to master!)
foreach seq in testseq[1-3].fasta ; do
newname=`basename $seq .fasta`
mkdir $newname
pushd $newname
blastx -db ../blastdb/sprot -query ../$seq -evalue 0.01 -outfmt 6 -out $newname.blastx
cat $newname.blastx | cut -f2 > top5.list
for hit in `cat top5.list` ; do
wget -q [http://www.uniprot.org/uniprot/$hit.txt “http://www.uniprot.org/uniprot/$hit.txt”
] done
popd
done
You can get the Z-shell to report what it is doing within loops and functions by running the command set
-x. To return to normal output type set +x.
Working with lots of BLAST results
Reading a few BLAST reports is fine, but when you have thousands, you presumably won’t be reading them
one by one yourself.
A common way to handle large volumes of BLAST results is to get the computer to process the report files,
pulling out key information. You can try using the various -outfmt options, which give you a great deal of
fine tuned control over what to report in tab delimited format. Alternatively, you can use a customised script.
You might choose to load such extracted information into a database, or for small scale studies, into a
spreadsheet. This topic is not covered further in this course, but we recommend BioPerl modules for parsing
BLAST report files. Example BioPerl scripts for BLAST parsing can be found on your Bio-Linux machine
under the following directory:
/usr/share/doc/bioperl/examples/searchio
61
EMBOSS Programs
EMBOSS is an extensive package of programs that cover areas of bioinformatics analysis including:
●
Sequence alignment
●
Rapid database searching with sequence patterns
●
Protein motif identification, including domain analysis
●
Nucleotide sequence pattern analysis—for example to identify CpG islands or repeats
●
Codon usage analysis for small genomes
●
Rapid identification of sequence patterns in large scale sequence sets
●
Presentation tools for publication
We recommend that you refer to the official EMBOSS overview at
http://emboss.sourceforge.net/what/#Overview to find out more about the extensive functionality available
via EMBOSS programs.
EMBOSS also consists of an underlying programming library, in case you are interested in building your
own EMBOSS tools.
Ways to run EMBOSS programs:
●
Locally installed, via the jemboss graphical interface on your Bio-Linux machine*
●
Locall installed via graphical interfaces available under the Applications | Bioinformatics | Emboss
menu
●
Locally installed, via the command line on your Bio-Linux machine*
●
Remotely on websites such as Mobyl:http://mobyle.pasteur.fr
●
Remotely using webservices
Biological databases and EMBOSS on Bio-Linux
Certain EMBOSS programs can talk to local or remote biological databases. The version of EMBOSS
installed on Bio-Linux machines is pre-configured to access data from embl, emblcds, uniprot (including
swissprot and trembl) and Refseq from the EBI. Information about how to change this configuration can be
found at
http://nebc.nerc.ac.uk/tools/bioinformatics-docs/other-bioinf/emboss-applications-and-databases
Sequence formats and EMBOSS
EMBOSS programs accept most common sequence formats. EMBOSS also includes a versatile tool called
seqret that can be used to convert between sequence formats should you need to do this for other
bioinformatics programs.
62
A comparison of the Jemboss and command line interfaces for EMBOSS programs
Interface
Pros
Cons
Jemboss
Graphical
Interface
Easy to see the programs available and what
type of analysis they do
Easy to run
Many programs accept input files with
multiple sequences, either directly or using
lists of sequence or filenames.
Documentation is easy to access
Much slower to set programs running than
on the command line
Not always obvious how to save and where
to save output
Additional programs with EMBOSS
interfaces are not available via this
interface. e.g. there are emboss interfaces
for phylip and hmmer programs, among
others, which are useful when creating
pipelines and automating tasks.
Programs that are interfaces to others (e.g.
emma is an EMBOSS interface to clustalw)
may not always work smoothly via
Jemboss, even though they are fine via the
command line.
Command
Line
Prompted command line makes programs
easy to run
Programs accept input files with multiple
sequences either directly or using lists of
sequence or filenames.
Easy to automate tasks and create pipelines
of tasks
Documentation still easy to access
Prompted command line makes it easy to
overlook many of the options available
You have to read the documentation to find
out about the options available
Working with EMBOSS programs
We will run a simple 3 stage task twice – once using Jemboss and once using the command line so that you
can experience ,and get a feeling for the differences between, the two interfaces. The task is to fetch a
sequence file from the EMBL database, extract all the mRNA sequences from the feature table and search for
palindromes in those mRNA sequences.
63
Exercise – using Jemboss
●
Start Jemboss on Bio-Linux by typing jemboss on the command line. It can also be started by clicking
on the icon under the Applications | Bioinformatics menu.
●
Click on each of the categories (e.g. Alignment, Display, etc) to see what programs are listed.
●
When you’re finished exploring, click on the Data Retrieval category and choose coderet which is
under Sequence Data.
●
Scroll to the bottom of the window and click on the
button to bring up a documentation window.
Read about what coderet does.
Figure 1: The Jemboss graphical interface to EMBOSS programs
Figure 2: The GO button is pressed when you are ready to run the program. The i button pops up a
window with documentation. Some, but not all programs, will also have an Advanced Options button that
will bring up, often very useful, optional fields.
64
Exercise continued
●
Scroll back to the top of the coderet form in the Jemboss window, and fill in a Sequence Filename. In
fact, we want to pull a sequence directly from embl at the EBI. The sequence we want is from a plasmid
and has the accession number U80928. To fetch it from the EBI, you need to type:
embl:U80928
into the Sequence Filename box.
●
Enter a filename into the outfile file name box. For example, to distinguish from your later
work, you could use the name: jemboss_bx.coderet.
●
Scroll to the bottom of the window and hit the GO button.
●
When the program has finished, a new window called Saved Results should appear. (Don’t be
fooled – your results haven’t been saved yet!) There should be a number of tabs in that window.
One will be called the name you entered into the the outfile file name box (e.g.
jemboss_bx.coderet) The others will likely be called things like u80928.cds, u80928.noncoding,
etc.
●
Take a look at the type of information in each tab. In particular, take note that:
➢
each of the tabs that contains sequence information contains multiple sequences
➢
the command line you would use to run this program identically to how you just ran it via
Jemboss is provided to you under the cmd tab. This will be useful later.
●
To work with any of this data further, you have to save it to a local file. Click on the tab with
the name ending in .cds. Choose the File | Save to Local File… option and save this to a location
you can find again (e.g. under your bioinf_files directory). Give it a name that will distinguish it
from later work -e.g. jemboss_bx.cds. Do not close the Saved Results window as we want to
refer to the information under the cmd tab later.
●
Go back to the main Jemboss window, go to the Nucleic | Repeats section and choose
palindrome from the list of programs.
●
Browse for the file you just saved using the Browse files… button next to the box under
Sequence Filename near the top of the page. Note that you’ll have to set the Files of Type: option
to All Files to find your saved file because it has a .cds suffix.
●
Check that you’re happy with all the required options, and give a filename in the outfile file
name box. For example, jemboss_palin.txt. Then press the GO button.
●
Scan through the results to see what has been returned to you.
You can also view listings of the files on your system using the Jemboss file manager functionality. Click on
the symbol at the bottom right side of the Jemboss window. If you double click on the name of a file that
contains text, it will pop up in another window for you to view or edit. Note: the file listings in the Jemboss
window are not updated unless you refresh them manually - the regular file browser or the ls command are a
better way to keep track of what files have been created or deleted.
Using the EMBOSS command line
All EMBOSS commands follow a similar pattern:
●
If you just type the command name, then you are prompted for required information.
65
●
If you type the command name followed by -opt then you are prompted for optional
information as well as required information.
●
If you type the command name, followed by a minimum amount of information, and -auto, the
program runs and uses defaults for anything you have not specified in the command.
●
The full command (i.e. the command and all relevant options and values) can be specified by
including parameters and arguments on the command line.
●
The command name followed by -h or -help brings up information about the main options for
the program.
●
The command name followed by -h -v brings up information about all options for the program
●
Typing tfm followed by the command name brings up the full documentation for the program.
So, using the EMBOSS program seqret as an example, we could run:
seqret
Run seqret and prompt for required information.
seqret -opt
Run seqret and prompt for required and optional information.
seqret -sequence embl:X03487
Run seqret, specifying the sequence. Prompts for additional
information.
seqret -sequence embl:XO3487 -auto
Run seqret, specifying the sequence. Defaults are used for all other
options.
seqret -help
Show information about the main options for seqret
seqret -h -v
Show information about all options for seqret
tfm seqret
Show full documentation for seqret
Much more information about the EMBOSS command line syntax is available at:
http://emboss.sourceforge.net/developers/acd/commandline.html
Exercise – using EMBOSS command line
●
Look at the cmd tab in your jemboss results window for coderet. You should see the following:
coderet -seqall embl:U80928 -outfile jemboss_bx.coderet -auto
This command runs coderet, specifies the sequence to use and sets the output file name. The -auto option
indicates that you do not want to be prompted for further information. This results in default values being
used for all options you have not specified on the command line.
●
Read about coderet by bringing up the information via the command line:
coderet -h or coderet -help
brings up a list of main options
coderet -h -v
brings up a list of all available options
tfm coderet
brings up the full documentation
66
(EMBOSS commands exercise continued)
●
To make things simple, we will edit the command line in the coderet cmd tab of the Saved Results
window in Jemboss, and then copy and paste our final command line into a terminal to run the program.
Go to the coderet cmd tab of the Saved Results window in Jemboss, and edit the command to give a
new output filename. e.g.
coderet -seqall embl:U80928 -outfile cl_bx.coderet -auto
●
Open a new terminal window and cd to your bioinf_files directory. Make a new directory to store your
result files (as it will make it easier to see what files the program generates by default).
mkdir cl_dir
●
Change directory into your new directory, copy and paste the coderet command line above into the
terminal and press the return key. (Recall that we covered highlighting and pasting text using mouse
buttons near the end of the first half of this tutorial.) ie:
cd cl_dir
coderet -seqall embl:U80928 -outfile cl_bx.coderet -auto
●
When the program finishes, list the files in your directory. What has coderet produced? How does this
compare with the tabs presented to you when you ran coderet via Jemboss?
You may notice that we have generated a lot of files we don’t need. We could have specified to coderet that
we only wanted the mRNA sections from the embl entry BX255937. To find out how, you’ll need to refer
to the coderet documentation (the lists of options won’t tell you enough).
●
Now run palindrome on the mRNA sequence. To do this, you could edit, copy and paste the the
command in the Jemboss Saved Results window for palindrome, or you can type palindrome on the
command line and answer the prompts. Please run palindrome now, doing one of these.
Once you get to know it, the command line is much faster to get running than programs via Jemboss.
However, the power of using the EMBOSS command line is much greater if you need to process groups of
files, or do things repetitively.
Below we’ll go through an example of running an emboss program on a batch of files using a single
command.
If you want to run a job like this repetitively, you can save the commands in a text file and then set things up
to get those command executed whenever you want (either by you directly, or by your
computer at a time
you schedule). We do not cover this in these course notes, but please ask the demonstrator if you would like
to know more about this.
67
Exercise
Fetching a list of sequences using seqret.
●
Look at the contents of the file hexaseqs.list in your bioinf_files directory. e.g. using the
command less. You will see a list of sequence ids and the database those sequences are in.
●
Quit less. (hit q)
●
We need to tell EMBOSS programs when they are going to work on a list of files rather than
just a single file. To do this, we preface the filename with the @ symbol. So, to fetch the list of
sequences in the hexaseqs.list file, we can use the command:
seqret -sequence @hexaseqs.list
The default behaviour of seqret is to fetch sequences in fasta format, with all sequences in a
single file with a filename that uses the id of the first sequence. By now you should know
how to go about finding out how to alter aspects of the program behaviour like these.
●
Take a look at the sequence file you have generated.
You can use this same “list of sequences” syntax with Jemboss. e.g. you could run seqret via
Jemboss and specify the sequence name as @hexaseqs.list.
68
General things to keep in mind
If you suspect there may be a more
efficient way to do what you are doing, there probably is!
If you find yourself doing anything
repetitively, there is probably an easier way to do it.
Please
read documentation and seek advice. It will save you a lot of time in the end!
A very basic sequence assembly
This demonstration takes you through a very simple assembly of some reads from a mitochondrial genome.
This is in no way supposed to be a tutorial on genome assembly, but rather a way to see various tools in
action on a small dataset.
This section of the course was originally written as a separate tutorial by Dan Pass. Note that, in all the
commands given in this tutorial, $ represents your terminal prompt. This is a common convention, even
though the real prompt will be something like “live@biolinux[live]”. Lines beginning with # are comments
and not to be typed.
Setup
•
Open up the Bio-Linux Documentation icon in the Dash menu, then the Introductory Tutorial
folder. You should see several tar files. Select assembly_taster.tar.xz and right click it. Select
Extract To… from the pop-up menu. Extract to your home directory, which on the Live USB system
is listed as live in the list on the left.
•
Open a terminal, then change into the new directory and list the files:
$ cd assembly_taster
- -lh options to ls show human-readable file size
$ ls -lh
•
To get a quick look at the input data, you can view it in the less text file viewer:
$ less mt_reads.fastq
- as usual, press q to return to the terminal.
•
Make a new directory to store your results:
$ mkdir results
Quality Checking
Firstly, in receiving a set of sequence data it is paramount to assess the quality of the dataset. A useful tool is
FastQC which gives a quick graphical overview of the dataset.
•
Run FastQC on the dataset
$ fastqc -o results mt_reads.fastq
•
Open the HTML report file.
- The ampersand (&) will put the process in the background so you can still use the terminal
$ firefox results/mt_reads_fastqc/fastqc_report.html &
Split Barcodes
The sequencing data may be barcoded, depending on the experimental set up. Here, two mitochondria have
been sequenced together, with differing 10bp barcodes at the 5’ end. This allows us to split the data into two
sets whilst only performing one sequencing run. Here we use a standard script from the fastx toolkit
(http://hannonlab.cshl.edu/fastx_toolkit/index.html)
69
•
Use fastx splitter splits mt_reads.fastq by barcode.
- –bol indicates that the barcodes are at the 5’ end.
- Note the following command should be typed on a single line:
$ fastx_barcode_splitter.pl <mt_reads.fastq –bcfile mt_barcodes.txt
–bol –suffix .fastq –prefix results/
There are now two .fastq files in the results directory; one for each barcode. There is also an unmatched.fasta
file which should be empty. We will be focusing on the first mitochondrion, ie. the one now in
results/mt1.fastq.
Clean Up
To remove artefacts and improve the assembly we will do two steps:
1) Trim barcodes
This removes the barcode sequences from the beginning of each read. The -Q33 is required due to
differences in sanger and illumina encoding.
$ cd results
$ fastx_trimmer -i mt1.fastq -f 8 -o trimmed_mt1.fastq -Q33
2) Quality Filter
Removing
low quality sequences increases the accuracy of the assembly.
Here
we remove any sequences which do not have >25 phred quality score (-q) at 80% of bases (-p). (n.b.
https://en.wikipedia.org/wiki/Phred_quality_score).
•
Run the quality filter
- -v instructs the script to give ‘verbose’ output and it is common to find in similar scripts.
$ fastq_quality_filter -i trimmed_mt1.fastq -q 25 -p 80
-o qual_trim_mt1.fastq -Q33 -v
Note that you could have run both the previous commands in one shot, combined as a pipeline.
$ fastx_trimmer -i mt2.fastq -f 8 -Q33 |
fastq_quality_filter -q 25 -p 80 -Q33 -o qual_trim_mt2.fastq
70
Assembly With Velvet
Velvet (https://www.ebi.ac.uk/~zerbino/velvet/) is a highly popular short-read assembler which is available
on Bio-Linux. There are countless parameters and combinations to achieve the best assembly, but we will
run close to default here. We will assess the quality of the assemblies in the next step.
•
Run velvet in single-end mode with k=21
‘
k’ signifies the Kmer length i.e. the length of sub sequences that the data is being broken up into, and is
one of the most important parameters to manipulate. Full parameters can be seen by typing either
command with no flags.
- You should still be in the results directory at this point
- velveth is a ‘hash program’ which breaks down your data into Kmer sized sequences
$ velveth velvet_k21 21 -short -fastq qual_trim_mt1.fastq
- velvetg performs de Bruijn graph construction, error removal and repeat resolution
$ velvetg velvet_k21 -read_trkg yes -amos_file yes
•
Inspect the results in the Tablet graphical viewer (not ideal - we have 139 contigs):
$ tablet velvet_k21/velvet_asm.afg &
Quick ‘cheat’
VelvetOptimiser is a script which automatically tries multiple parameter combinations and returns the best
assembly it can find. It can be helpful in pointing you in the right direction.
•
Try using velvetoptimiser
$ velvetoptimiser -s 27 -e 31 -f ‘-short -fastq qual_trim_mt1.fastq’ -a 1
$ tablet auto_data_31/velvet_asm.afg &
Assembly With Abyss
Abyss (http://www.bcgsc.ca/platform/bioinfo/software/abyss) is another popular assembler which we will
run to give a comparison. Again, multitudes of parameters are available, but here we will run mostly with
default settings, just optimising the K-mer length.
A major benefit of working in a command-line environment is the ability to loop easily through multiple
values. Without an existing ‘optimiser’ type program, a shell loop can be used to try many values.
71
•
Run abyss in single-end mode with k=21
$ abyss -k21 qual_trim_mt1.fastq -o abyss_contigs.fa
•
Try abyss with multiple kmer values
- Type the first line and press return. The prompt will change to “for>”
$ for k in {15..20}
for> abyss -k$k qual_trim_mt1.fastq -o abyss_k$k.fa
- This will run abyss for all values of k between 15 and 20, and
- produce output for each permutation.
Assessing The Assemblies
We used tablet to view the output from Velvet assemblies. This isn’t possible with the Abyss output as the
program does not provide a full assembly, just the consensus contigs. We can obtain some simple statistics
on all the assembly results on the command line.
For example, the gnx-tools command will output basic statistics on the multi-fasta file produced by the
assembler.
•
Compare assemblies with gnx-tools
$ for f in velvet_k21/contigs.fa auto_data_31/contigs.fa abyss_contigs.fa
for> gnx-tools $f
Adding Some Annotation
If sequence assembly is a tricky process to master then sequence annotation is a bona fide black art. There
are various approaches that one can use and several pipelines available that will help. But in this case, we
just want to get something to look at in Artemis. We’ll quickly scan the assembled genome for likely open
reading frames. We’ll use the Abyss output as this has (hopefully!) produced a single contig.
Glimmer3 (http://ccb.jhu.edu/software/glimmer/index.shtml) is an application for predicting open reading
frames in prokaryotic genomes. As with the assemblers above, it should generally be tuned for the specific
organism that you are working with and also provided with an appropriate training data set. But in this case
we will just run it quickly with the default options (don’t do this if you want actual meaningful results).
A Perl script is provided to convert the output from Glimmer into something that Artemis can view. You
don’t need to be a Perl programmer to re-use useful scripts like this.
$ g3-from-scratch abyss_contigs.fa glimmer
$ perl ../glimmer_to_gbk.perl <glimmer.predict >glimmer.gbk
$ artemis abyss_contigs.fa &
You should now be looking at a view of the contig in Artemis. From the File menu select Read An Entry… and
choose the file glimmer.gbk.
To conclude this section, load the file human_mitochondrial.gbk into Artemis for comparison. This is not
exectly the same as the mitochondrial data you’ve just assembled (which is from Lumbricus rubellus) but it is
fully annotated. Annotation will have been achieved using a combination of automated tools and manual editing
in Artemis. You can find more on Artemis, and on how to identify genes using BLAST, in the next section.
72
Artemis
Artemis is a DNA sequence viewer and annotation tool, allowing visualisation of sequence features and the
results of analyses within the context of the sequence and its six-frame translation. Artemis can read embl or
genbank format files. Sequences can be loaded from local files or via the network from the EBI.
Ways to run Artemis:
●
from a locally installed version on your Bio-Linux machine*
●
via Java Web Start from the Sanger Centre
(http://www.sanger.ac.uk/resources/software/artemis/java/artemis.jnlp)
73
Figure 16: Artemis Entry window after hsy14768.embl is loaded.
Exercise
●
Start Artemis on Bio-Linux by typing '''artemis on the command line or by choosing the
option '''Artemis from under the Bioinformatics Applications graphical menu.
●
Now choose the option Open… from under the Artemis File menu, and select the
file hsy14768.embl from within the bioinf_files directory.
This should open up a large window, as shown in Figure 14, where this sequence is displayed
graphically .
●
Open a terminal window and view the text of the embl entry using the command
less hsy14768.embl
Notice how Artemis is providing a graphical representation of what is in the text file.
●
Try choosing Mark Open Reading Frames from under the Create menu of
Artemis.
●
Choose to mark open reading frames with a minimum size of 200.
You should now see two boxes near the top in the Entry section, the first called hsy14768.embl
and the other called ORFS_200+.
●
Uncheck the box next to hsy14768.embl. You should now be able to scroll along the
window horizontally and easily see the open reading frames you marked.
●
Check the box next to hsy14768.embl again. Look at the information in the bottom
frame of the window. Notice how it is related to the images in the frames above.
●
Try clicking on some of the lines in the bottom frame and seeing what happens in the
images in the other two frames.
●
Explore the options available to you. (Not all options will be functional by default. See the
information about the Run menu below)
●
Close the Artemis Entry Editing window using File | Close.
●
You can also load up files direct from the EBI. If you want to try this, then choose File |
Open from the EBI – Dbfetch… option in the original small Artemis window and enter the
accession number BX255937.
●
When you are done, close Artemis by choosing File | Close in the sequence entry
window and then choosing File | Quit in the main (small) Artemis window.
You can run various programs on your sequence, or parts of your sequence, from under the Run menu in
Artemis. Some of the options in this menu need to be configured to be appropriate for your site. There is
information on how to do this on our website at:
http://nebc.nerc.ac.uk/tools/bioinformatics-docs/faq#blast_art
If you are not the system administrator of your Bio-Linux machine, then you will probably need to liaise
with the person who is to get this set up properly.
74
We also highly recommend Artemis’ sister program Act, which can be used to graphically view a pairwise
BLAST betrween two or more sequences.
Appendix A – BLAST references and documentation
Web pages
The blastall and blast+ page in your Bio-Linux Bioinformatics Docs provides links to local web pages with
information about NCBI BLAST programs. You can also access this remotely at the URL:
[http://nebc.nox.ac.uk/bioinformatics/docs/blastall.html http://nebc.nerc.ac.uk/bioinformatics/docs/blastall.html
http://nebc.nerc.ac.uk/bioinformatics/docs/blast+.html]
NCBI BLAST Manual pages
[http://www.ncbi.nlm.nih.gov/books/NBK1763/ http://www.ncbi.nlm.nih.gov/books/NBK1763/
]http://www.ncbi.nlm.nih.gov/blast/blast_help.shtml
NCBI BLAST Web Interface paper
http://nar.oxfordjournals.org/cgi/content/full/36/suppl_2/W5
Sequence similarity statistics
http://www.ncbi.nlm.nih.gov/BLAST/tutorial/Altschul-1.html
NEBC BLAST Frequently asked questions
http://nebc.nerc.ac.uk/tools/bioinformatics-docs/other-bioinf/blastfaq
NEBC November 2007 Masters Bioinformatics Course (covers older blastall, rather than BLAST+)
[http://nebc.nerc.ac.uk/support/training/course-notes/past-notes/nebc-introduction-to-bioinformatics-msc.-biology-2007 http://nebc.nerc.ac.uk/support/training/course-notes/past-notes/nebc-introduction-to-bioinformatics-
msc.-biology-2007]
References
The book by Ian Korf is a good place to start in learning about what BLAST can do, how it does it and what BLAST output means. It
is now out of date however, and should be read in conjunction with the new blast+ documentation. Also note that wu-blast is now
AB-blast, which is licensed software from Advanced Biocomputing LLC.
S. F. Altschul, T. L. Madden, A. A. Schaffer, J. Zhang, Z. Zhang, W. Miller, and D. J. Lipman.
Gapped blast and psi-blast: a new generation of protein database search programs.
Nucleic Acids Res, 25(17):3389–402, 1997.
Lm05110/lm/nlm Journal Article Research Support, U.S. Gov’t, P.H.S. Review England.
S. F. Altschul, J. C. Wootton, E. M. Gertz, R. Agarwala, A. Morgulis, A. A. Schaffer, and Y. K. Yu.
Protein database searches using compositionally adjusted substitution matrices.
Febs J, 272(20):5101–9, 2005. Z01 lm000072-10/lm/nlm Journal Article Review England.
C. Camacho, G. Coulouris, V. Avagyan, M.N. Papadopoulos, K. Bealer and T.L. Madden.
Blast+: architecture and applciations. BMC Bioinformatics, 10: 421, 2009
S. R. Eddy. Where did the blosum62 alignment score matrix come from?
Nat Biotechnol, 22(8):1035–6, 2004. Evaluation Studies Journal Article Review United States.
Ian Korf, Mark Yandell, Joseph Bedell, and Stephen Altschul.
BLAST. [“An essential guide to the Basic Local Alignment Search Tool”. Includes bibliographical references and index.]
O’Reilly, Sebastopol, Calif. ; Farnham, 2003. GB A3-Y7706 ill. ; 24 cm.
A. A. Schaffer, L. Aravind, T. L. Madden, S. Shavirin, J. L. Spouge, Y. I. Wolf, E. V. Koonin, and S. F. Altschul.
Improving the accuracy of psi-blast protein database searches with composition-based statistics and other refinements.
Nucleic Acids Res, 29(14):2994–3005, 2001. Journal Article Review England.
Y. K. Yu, E. M. Gertz, R. Agarwala, A. A. Schaffer, and S. F. Altschul.
Retrieval accuracy, statistical significance and compositional similarity in protein sequence database searches. Nucleic Acids Res,
34(20):5966–73, 2006. Evaluation Studies Journal Article Research Support, N.I.H., Intramural England.
75
Appendix B – Creating local BLAST databases
Obtaining local BLAST databases
To get the most from BLAST, you should search against a relevant database, which may mean using the
relevant parts of a larger database. In general, BLAST searching against the whole of nr or the whole of embl
is not a particularly good idea. It takes up your time and computer resources, returns BLAST results with less
useful statistics and often less meaningful results. For example, if you are studying marine viruses, do you
really care about all the mouse sequence in nr or embl?
Web resources often offer different data subsets you can search against. For example, using the NCBI
BLAST pages, you can choose from a certain number of database sections, or you can fine tune the sequence
set you blast against using Entrez queries:
http://blast.ncbi.nlm.nih.gov/Blast.cgi?CMD=Web&PAGE_TYPE=BlastDocs&DOC_TYPE=FAQ#entrez
http://www.ncbi.nlm.nih.gov/bookshelf/br.fcgi?book=helpentrez&part=EntrezHelp
Using the EBI BLAST services, you can choose from a number of data subsets, as well as having a choice of
WU-blast or NCBI blastall.
http://www.ebi.ac.uk/Tools/blast/
To run BLAST locally, you need to index your collection of sequences; it is these indices that BLAST reads
when searching. For some databases or database divisions, you can download prepared BLAST indices from
sites such as the NCBI. These are convenient, but do restrict you to searching against particular sets of
sequences. It is often useful to create a set of sequences chosen for the types of searches you wish to carry
out (e.g. organism or tissue specific) and format them into a database you can search using BLAST.
Any set of fasta sequences can be indexed for BLAST searching. Creating useful sets of sequences is beyond
the scope of this course, but two resources to consider are SRS (http://srs.ebi.ac.uk) and Entrez
(http://www.ncbi.nlm.nih.gov/books/bookres.fcgi/helpentrez/EntrezHelp.pdf).
For NCBI blastall, the formatdb command is run on fasta formatted files to create BLAST indices.
For BLAST+, the program used is called makeblastdb, and this is the you want to use, though BLAST+ will
happily search databases made with formatdb.
Some data resources useful for local BLAST
URL
Database File
format
Contents
ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/uniprot/
uniprot
fasta
Uniprot, swissprot and
trembl
[ftp://ftp.ebi.ac.uk/pub/databases/uniprot/current_release/knowledgebase/taxonomic_divisions/ ftp://ftp.ebi.ac.uk/pub/databases/uniprot/current_rele
ase/knowledgebase/taxonomic_divisions/]
uniprot
embl
Uniprot divisions
[ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/emblrelease/ ftp://ftp.ebi.ac.uk/pub/databases/fastafiles/emblreleas
e/]
embl
fasta
Individual embl divisions
ftp://ftp.ebi.ac.uk/pub/databases/embl/release/
embl
embl
Individual embl divisions
[ftp://ftp.ncbi.nlm.nih.gov/blast/db/ ftp://ftp.ncbi.nlm.nih.gov/blast/db/
ftp://ftp.ebi.ac.uk/pub/blast/db/]
various
blast
nr, nt, env and a few other
BLAST formatted databases
or database sections.
ftp://ftp.ncbi.nlm.nih.gov/genbank
genbank
genbank
Individual genbank divisions
76
One thing to note in the table above is that uniprot divisions are provided in embl format. However, BLAST
indices are created from fasta format files. Unfortunately, the EMBOSS program seqret, which you saw
earlier, does not handle entire database divisions well. Instead, you can use a simple script to do the
conversion. Instructions on this are below.
If you choose to use pre-formatted BLAST databases, make sure you read the notes about them (usually
available as a file called something like REAMDE on the FTP site you get the BLAST files from) as they
can be slightly different than the database that results from downloading and formatting your own.
Building BLAST indices from local sequence files
We will use the uniprot swissprot virus division as an example here. As this is distributed in embl format,
and we need it in fasta format, we include a format conversion step in the instructions below.
Bio-Linux machines by default have the BLASTDB environmental variable set to a central location. To find
out where it is set to on your machine, you can use the command:
echo $BLASTDB
If you are logged in as an administrative user, then you will be able to download and work in any area on the
machine using your sudo privileges. If you are on a multi-user system and are not an administrative user, the
default location for BLAST databases may not be writable by you. In this case, you should talk to your
system administrator: either to ask them to give you privileges in the central BLAST database folder, or warn
them that you are about to use lots of space in your account for BLAST databases.
These instructions assume that you are working from the directory where you will be storing your BLAST
database files. This is not normally the case. Usually, if you download BLAST databases into your account,
it is easiest to set the BLASTDB environmental variable to the location of these BLAST databases, and then
work from a convenient folder where you plan to store your results. You can set the BLASTDB
environmental variable for a single session by typing a line of the form below in the terminal you are
working in. To set this variable for every session, you can add the line to your ~/.zshrc file.
export BLASTDB=”$HOME/blastdb”
●
Download the database section of interest. Here we will work with the uniprot swissprot virus division:
wget
77
Understand your databases
It is important to read the documentation about the databases you choose to work with.
For example, uniprot and nr are not the same. nt is not a non-redundant database; nr is.
Knowing what is in a database you work with is vital in understanding your results.
Nucleic Acids Research publishes a database issue in January of each year.
This is an excellent resource for finding out more about available database resources.
Another useful resource is the information available via the links on the Library page of SRS at the EBI:
http://srs.ebi.ac.uk/srsbin/cgi-bin/wgetz?-page+top
●
If you don’t already have a sequence conversion tool, download the emblToFastaAndPreProcess.pl
script from the NEBC site.
wget http://nebc.nerc.ac.uk/downloads/scripts/bioinf/emblToFastaAndPreProcess.pl
This script converts embl sequence to fasta sequence. Due to issues that sometimes appear because of the
formatting of information in the feature table, it does so by removing the feature lines from the entry before
conversion. A version of the script that does not pre-edit the feature lines is also available:
http://nebc.nerc.ac.uk/downloads/scripts/bioinf/emblToFasta.pl
●
Make this script executable.
chmod u+x emblToFastaAndPreProcess.pl
●
This script can handle compressed files, so you can create a fasta formatted copy of the
uniprot_sprot_viruses division by running the command:
./emblToFastaAndPreProcess.pl uniprot_sprot_viruses.dat.gz
Notice the ./ at the start of the line. You need this if you are running the script from the directory you are in.
There are better ways to do this if you plan to keep this script for use again, but they are not covered here.
●
When the script is finished, you should find a file called uniprot_sprot_viruses.fasta in your directory.
This is the file we build the BLAST database from.
makeblastdb -dbtype prot -in uniprot_sprot_viruses.fasta -out sprot_virus
●
You should now have four new files in your directory: sprot_virus.psq, sprot_virus.pin, sprot_virus.phr
and formatdb.log. The last of these lets you know how the BLAST formatting went.
The sprot_virus.p* files are your BLAST indices. You search against them by specifying the BLAST
database name sprot_virus.
Note:
If you were interested in the swissprot virus division, you would probably be interested in the trembl virus
division also. You could download and format that division as described above, and then search the swissprot
and trembl virus divisions separately, or as a single, virtual database. Alternatively, you could create a single
BLAST formatted database from the two fasta files using cat and makeblastdb:
cat uniprot_sprot_viruses.fasta uniprot_trembl_viruses.fasta |
makeblastdb -in - -out uniprot_viruses -dbtype prot -title “combined sprot and trembl virus divisions”
What is the best division to search against depends on what you need to accomplish.
78
Appendix C - Cheat sheet of basic Linux commands
bg
To send a suspended job to the background
cat fileName1
Output a file to the screen (see also more and less)
cat file1 file2 file3 > newfile
Append three files together and put the result in newfile
cat -nA file1
Output a file to screen, numbering all lines and revealing non-
printing characters
cd dirName
Change to directory dirName. Use cd .. to go up one dir or just
cd to go home.
chmod
To change the permissions or protection on a file, to allow
everyone to read a file (chmod a+r somefile)
clear
clear the terminal screen
cp fileName1 fileName2
create a copy of the file called fileName1 and call the copy
fileName2
cp fileName directoryName
copy the file fileName into a directory called directoryName
cp –R dirName1 dirName2
copy a whole directory called dirName1 and its contents into
another directory called dirName2.
date
Print the current date and time
df –h
File system information including space usage
diff file1 file2
Summarise differences between two similar text files file1 and
file 2. See also the graphical tool, meld
echo $NAME
Print the value of an environment variable called $NAME
emacs
A text editor, more powerful than gedit, but more complex.
evince
A command for viewing postscript or PDF formatted files
exit
Exit the current terminal
export NAME=value
Set the environment variable $NAME to “value”
fg
Brings a suspended or background job to the foreground
file fileName
Tries to determine what fileName is by looking at the contents
find -name “test*”
Scans for filenames matching a given glob pattern in the current
folder and subfolders. This command is tricky to use. To scan
the whole system for files, try locate.
gedit
The standard text editor
grep
Search for the occurrence of a pattern
groups or id
Show what groups a user is in.
head fileName
Show just the first few lines of fileName
history
List log of previous commands you have entered
jobs
Lists any suspended or background processes that you have
running. See also ps and pgrep
kill pid
Kill a process that is running where pid is the process id number
(see ps). Also consider pgrep and pkill.
last
Info about who has logged onto the machine recently
79
less
Type a file to the screen one page at a time (press q to quit,
spacebar for next page, b to go back a page)
ls
List the files in your directory
ls –l
List the files in your directory but with “longer” information.
(Add -h for more readable file sizes)
man command
For help about UNIX command “command”
man -k keyword
Lists all UNIX commands that mention the word “keyword”
mkdir dirName
Make a directory
more fileName
Type a file to the screen a page at a time (press q to quit, spacebar
for next page).
mv file1 dirName
Assuming dirName is an existing directory, move a file called file1
into a directory called dirName
mv file1 file2
Rename file1 and call it file2
nano
A basic text editor that runs in the terminal
passwd
Change your password
pgrep pattern
Find process names that contain the pattern. See also ps
pkill processname
Kill a running process using the process name. Be careful with
this! See also ps, pgrep and kill
pwd
Print the full path of your current directory
ps –u
List your current processes
ps –aux
List all processes on the machine. See also top
rm fileName
Delete a file
rm –rf dirName
Delete a directory and all its contents
rmdir
Delete an empty directory
screen
Run the screen manager (read the man page first!)
stat fileName
Show detailed info on fileName, similar to ls -l
tail
Show just the last few lines of a file. See also head.
tar -xvz -f fileName.tar.gz
Unpack a tarball from the file fileName.tar.gz
someCommand '''| tee fileName
Save output of someCommand to fileName and also print to
screen. Use instead of >fileName if you want to redirect but still
see the output.
top
List the processes running that are using the most CPU
touch fileName
Create an empty file (also updates file timestamps)
wc -l fileName
Count lines in fileName
which commandName
Reveal what will really be run when you give a command
w or who
List users currently logged on
yes
A very useful command ;-)
Ctrl-c
Stop (interrupt) a process
Ctrl-r
Interactively search in command log. See history
Ctrl-z
Suspend a process, see also jobs, fg and bg
80
81
