SCAN-pc laptop

From wiki
Revision as of 16:59, 20 September 2017 by Rf (talk | contribs)
Jump to: navigation, search

Introduction

Bought by Janet Cox-Singh for use exclusively with Oxford Nanopore's MinION USB sequencing devices


Recent Behaviour (Sept 2017)

The laptop will light up, but will not commence device activation, i.e. will not proceed to BIOS. The keyboard will certainly light up, but there is no noise and the screen is entirely blank.

The LED for the harddisk flashes slowly .. this may point to something to do with the hard disks. It may also have o do with the graphical card and conflicts with nouveau drivers, as once the laptop does get going, on closing down, very many warnings about nouveau drivers come up.


Measures taken

Opened laptop, took out both hard disks, reseated memory. Leaving out one memory module has the effect of laptop cycling automatically between on and off.

Pieces were returned to their places, but laptop continued its original behaviour.

Laptop was connected to external screen, just in case the graphics have anythign to do with it. However, external monitor remained blank (it was tested with another laptop).

The laptop was then left on, and suddenly, about 30 mins or 1 hours later, it came to life and booted normally to biolinux.